Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S267751AbUI1N56 (ORCPT ); Tue, 28 Sep 2004 09:57:58 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S267536AbUI1N56 (ORCPT ); Tue, 28 Sep 2004 09:57:58 -0400 Received: from parcelfarce.linux.theplanet.co.uk ([195.92.249.252]:31199 "EHLO www.linux.org.uk") by vger.kernel.org with ESMTP id S267904AbUI1NyH (ORCPT ); Tue, 28 Sep 2004 09:54:07 -0400 Date: Tue, 28 Sep 2004 09:04:21 -0300 From: Marcelo Tosatti To: linux-kernel@vger.kernel.org, torvalds@osdl.org Cc: Greg KH , germano.barreiro@cyclades.com Subject: [PATCH] cyclades.c sysfs statistics support Message-ID: <20040928120421.GB11779@logos.cnet> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.5.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 30501 Lines: 818 Hi Linus, The following patch from Germano Barreiro adds support for sysfs based extended statistics support to the Cyclades multiserial driver. It is used by CyMonitor tool, distributed with Cyclades async driver package. This has passed our QA procedure. Please apply Signed-off-by: Marcelo Tosatti Signed-off-by: Germano Barreiro --- linux-2.6.9rc2.orig/drivers/char/cyclades.c 2004-09-20 09:32:57.000000000 -0300 +++ linux/drivers/char/cyclades.c 2004-09-22 13:03:08.000000000 -0300 @@ -2,7 +2,7 @@ #define Z_WAKE #undef Z_EXT_CHARS_IN_BUFFER static char rcsid[] = -"$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $"; +"$Revision: 2.3.2.21 $$Date: 2004/09/15 13:10:10 $"; /* * linux/drivers/char/cyclades.c @@ -25,6 +25,33 @@ * This version supports shared IRQ's (only for PCI boards). * * $Log: cyclades.c,v $ + * Revision 1.11 2004/09/15 13:10:10 germano + * bug correction: wrong number of ports showed at startup + * + * Revision 1.8 2004/09/08 14:26:46 germano + * removed debugging messages, commented code, and such stuff that normally appears during the developing process + * + * Revision 1.7 2004/09/03 22:55:55 germano + * made the module read the correct number of boards from the firmware when using a Z board + * + * Revision 1.6 2004/09/02 13:10:51 germano + * gave a more correct name to the function that exports information under /sys/device + * + * Revision 1.5 2004/09/01 21:38:23 germano + * old procfs code ported to new sysfs + * + * Revision 1.4 2004/08/30 18:46:05 germano + * new try to implement sysfs for async + * + * Revision 1.1 2004/08/27 20:55:55 germano + * sysfs work on async + * + * Revision 1.2 2004/08/26 20:30:11 germano + * daily global commit + * + * Revision 1.1 2004/08/20 20:13:19 germano + * started sysfs support coding + * * Prevent users from opening non-existing Z ports. * * Revision 2.3.2.8 2000/07/06 18:14:16 ivan @@ -646,7 +673,6 @@ #include #include #include -#include #include #include #include @@ -672,9 +697,9 @@ #include #include #include - #include #include +#include static void cy_throttle (struct tty_struct *tty); static void cy_send_xchar (struct tty_struct *tty, char ch); @@ -700,6 +725,7 @@ #define JIFFIES_DIFF(n, j) ((j) - (n)) +static char _version[80]; static struct tty_driver *cy_serial_driver; #ifdef CONFIG_ISA @@ -2528,6 +2554,13 @@ int retval, line; unsigned long page; + uclong numberports=0; + + /* these were included to make the necessary code for this + module to report the correct number of ports when using a Z-board */ + struct ZFW_CTRL *zfw_ctrl; + struct BOARD_CTRL *board_ctrl; + line = tty->index; if ((line < 0) || (NR_PORTS <= line)){ return -ENODEV; @@ -2546,6 +2579,14 @@ struct FIRM_ID *firm_id = (struct FIRM_ID *) (cinfo->base_addr + ID_ADDRESS); + /* find out the number of ports registered by the firmware*/ + zfw_ctrl = (struct ZFW_CTRL *)(cy_card[info->card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff)); + board_ctrl = &(zfw_ctrl->board_ctrl); + numberports = cy_readl(&board_ctrl->n_channel); + + /* prints the port opened together with the number of ports for that board */ + printk(KERN_INFO "Opening port %d of %lu in this board\n",line,numberports); + if (!ISZLOADED(*cinfo)) { if (((ZE_V1 ==cy_readl(&((struct RUNTIME_9060 *) (cinfo->ctl_addr))->mail_box_0)) && @@ -2647,9 +2688,12 @@ info->throttle = 0; #ifdef CY_DEBUG_OPEN - printk(" cyc:cy_open done\n");/**/ + printk(" cyc:cy_open done\n"); #endif + /*records line struct pointer for recovering when reading sysfs*/ + cy_card[info->card].pdev->dev.driver_data=info; + device_create_file(&(cy_card[info->card].pdev->dev), &_cydas[line]); return 0; } /* cy_open */ @@ -2874,6 +2918,7 @@ #endif CY_UNLOCK(info, flags); + device_remove_file(&cy_card[info->card].pdev->dev, &_cydas[info->line]); return; } /* cy_close */ @@ -4831,6 +4876,13 @@ uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS]; unsigned char Ze_irq[NR_CARDS]; struct pci_dev *Ze_pdev[NR_CARDS]; + uclong numberports=0; + + /* these were included to make the necessary code for this + module to report the correct number of ports when using a Z-board */ + struct FIRM_ID *firm_id; + struct ZFW_CTRL *zfw_ctrl; + struct BOARD_CTRL *board_ctrl; for (i = 0; i < NR_CARDS; i++) { /* look for a Cyclades card by vendor and device id */ @@ -5229,6 +5281,12 @@ cy_card[j].num_chips = -1; cy_card[j].pdev = pdev; + /* find out the number of ports registered by the firmware*/ + firm_id = (struct FIRM_ID *)(cy_pci_addr2 + ID_ADDRESS); + zfw_ctrl = (struct ZFW_CTRL *)(cy_pci_addr2 + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff)); + board_ctrl = &(zfw_ctrl->board_ctrl); + numberports = cy_readl(&board_ctrl->n_channel); + /* print message */ #ifdef CONFIG_CYZ_INTR /* don't report IRQ if board is no IRQ */ @@ -5243,8 +5301,6 @@ j+1,(ulong)cy_pci_phys2, (ulong)(cy_pci_phys2 + CyPCI_Ze_win - 1)); - printk("%d channels starting from port %d.\n", - cy_pci_nchan,cy_next_channel); cy_next_channel += cy_pci_nchan; } if (ZeIndex != 0) { @@ -5276,6 +5332,8 @@ rcsvers, rcsdate); printk(" built %s %s\n", __DATE__, __TIME__); + /* _version is later used by show_sys_data */ + sprintf(_version,"Cyclades driver %s %s\n built %s %s\n", rcsvers, rcsdate, __DATE__, __TIME__); } /* show_version */ static int @@ -5393,7 +5450,6 @@ show_version(); /* Initialize the tty_driver structure */ - cy_serial_driver->owner = THIS_MODULE; cy_serial_driver->driver_name = "cyclades"; cy_serial_driver->name = "ttyC"; @@ -5668,4 +5724,275 @@ } /* cy_setup */ #endif /* MODULE */ +/***************************************************************************************************** + SYSFS SUPPORT FUNCTIONS + Germano Barreiro - 2/09/2004 + ****************************************************************************************************/ + + /*************************************************************************************************** + show_sys_data - shows the data exported to sysfs/device, mostly the signals status involved in the + serial communication such as CTS,RTS,DTS,etc + This function is called by the kernel whenever any user mode process tries to read a file created + in the virtual filesystem /sys/device/.../ttyC? + The code internal to this function, with few changes, was extracted from the original procfs + implementation in the cyclades async serial driver, made by Ivan. + + p - points to the struct device associated with this channel. Besides some other potentially useful + information for future debugging tasks, cy_open() saves there a pointer to the cyclades_port + associated with this channel, which in recovered in this function. + buf - points to the buffer where the data to be available in the file mentioned above must be written + + Returns the number of bytes written to user space + ***************************************************************************************************/ + static ssize_t show_sys_data(struct device *p, char *buf) + { + + int len, z; + int flow; // 0:none, 1:soft ctr, 2: hard ctr + int chip; + //cy_open recorded the cyclades_port pointer here + struct cyclades_port *info = p->driver_data; + //ind will be an index to the cyclades_port struct associated to this device in the array cy_port[] + int ind = info - cy_port; + struct tty_struct * tty = info->tty; + unsigned char *base_addr = (unsigned char *) cy_card[info->card].base_addr; + struct FIRM_ID *firm_id = (struct FIRM_ID *) (base_addr + ID_ADDRESS); + struct ZFW_CTRL *zfw_ctrl = (struct ZFW_CTRL *) (base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff)); + struct CH_CTRL *ch_ctrl = zfw_ctrl->ch_ctrl; + struct BUF_CTRL *buf_ctrl = &(zfw_ctrl->buf_ctrl[ind - cy_card[info->card].first_line]); + int card = info->card; + int channel = (info->line) - (cy_card[card].first_line); + int index = cy_card[card].bus_index; + uclong control; + + //refer to cyclades.h to many of the symbols below + if ( tty == 0 ) { + len = sprintf(buf, "%s:%s\n", cysys_state, cysys_close); + return len; + } + len = sprintf(buf, "%s:%s\n", cysys_state, cysys_open); + + //Printing tty and board type + if (IS_CYC_Z(cy_card[card])) { + z = 1; + len += sprintf(buf+len, "%s:%s\n", cysys_ct, cysys_z); + } else { + z = 0; + len += sprintf(buf+len, "%s:%s\n", cysys_ct, cysys_y); + } + + //Printing the baud rate + len += sprintf(buf+len, "%s:%d\n", cysys_baud, tty_get_baud_rate(tty) ); + + //Printing the flow control type + if (I_IXOFF(tty)) { + flow = 1; + len += sprintf(buf+len, "%s:%s\n", cysys_fc, cysys_fc_soft); + } else if ( C_CRTSCTS(tty) ) { + flow = 2; + len += sprintf(buf+len, "%s:%s\n", cysys_fc, cysys_fc_hard); + } else { + flow = 0; + len += sprintf(buf+len, "%s:%s\n", cysys_fc, cysys_fc_none); + } + + //printing the flow status + if (z == 1) { // Cyclades-Z board + if ( flow == 2 ) { //hard flow control + uclong control = cy_readl(&ch_ctrl[channel].rs_status); + if (control & C_RS_RTS) { + len += sprintf(buf+len, "%s:%s\n", cysys_rxfcs, cysys_on); + } else { + len += sprintf(buf+len, "%s:%s\n", cysys_rxfcs, cysys_off); + } + + if (control & C_RS_CTS) { + len += sprintf(buf+len, "%s:%s\n", cysys_txfcs, cysys_on); + } else { + len += sprintf(buf+len, "%s:%s\n", cysys_txfcs, cysys_off); + } + } else if (flow == 1) { //soft flow control + // Fix me. Find how to discover the software flow control state + } + } else { // Cyclades-Y board + uclong aux; + chip = channel >> 2; + channel &= 0x03; + base_addr = (unsigned char *)(cy_card[card].base_addr + + (cy_chip_offset[chip] << index)); + + if ( flow == 1 ) { // Software flow control + /* + int ccsr; + unsigned long flags; + CY_LOCK(info, flags); + cy_writeb((u_long) base_addr + (CyCAR << index), (u_char) channel); + ccsr = cy_readb((u_long) base_addr + (CyCCSR << index)); + CY_UNLOCK(info, flags); + len += sprintf(buf+len, "ccsr:%x\n", ccsr); + */ + // Fix me. It seems the CCSR register is not responding properly + } + + if ( flow == 2 ) { // Hardware flow control + uclong control = cy_readb((u_long) base_addr + (CyMSVR1 << index)); + + if (info->rtsdtr_inv) { + aux = CyDTR; + } else { + aux = CyRTS; + } + + if (control & aux) { + len += sprintf(buf+len, "%s:%s\n", cysys_rxfcs, cysys_on); + } else { + len += sprintf(buf+len, "%s:%s\n", cysys_rxfcs, cysys_off); + } + } + } + + //Printing status of the signals: DCD, DSR, CTS, RTS, DTR + if (z == 1) { // Cyclades-Z board + control = cy_readl(&ch_ctrl[channel].rs_status); + } else { + control = cy_readb((u_long) base_addr + (CyMSVR1 << index)); + } + + // DCD status + len += sprintf(buf+len, "%s:%s\n", cysys_dcd, + (control & (z ? C_RS_DCD:CyDCD) ) ? cysys_on : cysys_off); + + // DSR Status + len += sprintf(buf+len, "%s:%s\n", cysys_dsr, + (control & (z ? C_RS_DSR:CyDSR) ) ? cysys_on : cysys_off); + + // CTS status + len += sprintf(buf+len, "%s:%s\n", cysys_cts, + (control & (z ? C_RS_CTS:CyCTS) ) ? cysys_on : cysys_off); + + // RTS status + len += sprintf(buf+len, "%s:%s\n", cysys_rts, + (control & (z ? C_RS_RTS:CyRTS) ) ? cysys_on : cysys_off); + + // DTR status + len += sprintf(buf+len, "%s:%s\n", cysys_dtr, + (control & (z ? C_RS_DTR:(info->rtsdtr_inv ? CyRTS : CyDTR)) ) ? cysys_on : cysys_off); + + + //Printing status of tty buffer + len += sprintf(buf+len,"%s:%d/%d\n", cysys_ttyrxbuf, + tty->read_cnt,N_TTY_BUF_SIZE); + len += sprintf(buf+len, "%s:%d/%ld\n", cysys_ttytxbuf, + info->xmit_cnt, SERIAL_XMIT_SIZE); + + //Printing the status of onboard buffer (for cyclades z only) + if ( z == 1) { + volatile uclong put, get, bufsize; + volatile int char_count; + //rx + get = cy_readl(&buf_ctrl->rx_get); + put = cy_readl(&buf_ctrl->rx_put); + bufsize = cy_readl(&buf_ctrl->rx_bufsize); + if (put >= get) { + char_count = put - get; + } else { + char_count = put - get + bufsize; + } + len += sprintf(buf+len, "%s:%d/%ld\n", cysys_boardrxbuf, + char_count, bufsize); + + //tx + get = cy_readl(&buf_ctrl->tx_get); + put = cy_readl(&buf_ctrl->tx_put); + bufsize = cy_readl(&buf_ctrl->tx_bufsize); + if (put >= get) { + char_count = put - get; + } else { + char_count = put - get + bufsize; + } + len += sprintf(buf+len, "%s:%d/%ld\n", cysys_boardtxbuf, + char_count, bufsize); + } + + //Printing communication data len + if (z == 1){ + uclong data_len, pari; + char par; + int nstop, char_len; + + data_len = cy_readl(&ch_ctrl[channel].comm_data_l); + pari = cy_readl(&ch_ctrl[channel].comm_parity); + + switch (pari) { + case C_PR_NONE: + par = 'n'; + break; + case C_PR_ODD: + par = 'o'; + break; + case C_PR_EVEN: + par = 'e'; + break; + default: + par = 'n'; + break; + } + + if ( data_len & C_DL_2STOP) { + nstop = 2; + } else { + nstop = 1; + } + + switch (data_len & 0x0f) { + case 1: + char_len = 5; + break; + case 2: + char_len = 6; + break; + case 4: + char_len = 7; + break; + case 8: + char_len = 8; + break; + default: + char_len = 8; + break; + } + + len += sprintf(buf+len, "%s:%d%c%d\n", cysys_charlen, + char_len, par, nstop); + } else { + int nstop; + char par; + + switch ( info->cor1 & 0xc0) { + case CyPARITY_NONE: + par = 'n'; + break; + case CyPARITY_O: + par = 'o'; + break; + case CyPARITY_E: + par = 'e'; + break; + default: + par = 'n'; + break; + } + + if ( info->cor1 & Cy_2_STOP) { + nstop = 2; + } else { + nstop = 1; + } + + len += sprintf(buf+len, "%s:%d%c%d\n", cysys_charlen, + (info->cor1 & 0x03) + 5, par, nstop); + } + return len; + } + MODULE_LICENSE("GPL"); --- linux-2.6.9rc2.orig/include/linux/cyclades.h 2004-09-20 09:33:37.000000000 -0300 +++ linux/include/linux/cyclades.h 2004-09-22 11:49:11.000000000 -0300 @@ -1,4 +1,4 @@ -/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ +/* $Revision: 3.1 $$Date: 2004/09/15 13:10:10 $ * linux/include/linux/cyclades.h * * This file was initially written by @@ -7,6 +7,24 @@ * * This file contains the general definitions for the cyclades.c driver *$Log: cyclades.h,v $ + *Revision 1.7 2004/09/15 13:10:10 germano + *bug correction: wrong number of ports showed at startup + * + *Revision 1.5 2004/09/02 20:18:41 germano + *Changed CyMonitor and drivers to export the atributes names under /sys as cycser[0-255]. Corrected installation scripts to run propertly under 2.6 kernel. + * + *Revision 1.4 2004/09/02 13:10:51 germano + *gave a more correct name to the function that exports information under /sys/device + * + *Revision 1.3 2004/09/01 21:38:23 germano + *old procfs code ported to new sysfs + * + *Revision 1.2 2004/08/30 18:46:06 germano + *new try to implement sysfs for async + * + *Revision 1.1 2004/08/20 20:13:19 germano + *started sysfs support coding + * *Revision 3.1 2002/01/29 11:36:16 henrique *added throttle field on struct cyclades_port to indicate whether the *port is throttled or not @@ -401,6 +419,43 @@ #define C_CM_FATAL 0x91 /* fatal error */ #define C_CM_HW_RESET 0x92 /* reset board */ + +//strings +char cysys_state[] = "State "; +char cysys_open[] = "Open"; +char cysys_close[] = "Close"; + +char cysys_ct[] = "Card Type "; +char cysys_z[] = "Cyclades Z"; +char cysys_y[] = "Cyclades Y"; + +char cysys_baud[] = "Baud Rate "; + +char cysys_fc[] = "Flow Control "; +char cysys_fc_soft[] = "software"; +char cysys_fc_hard[] = "hardware"; +char cysys_fc_none[] = "none"; + +char cysys_rxfcs[] = "RX Flow Control Status"; +char cysys_txfcs[] = "TX Flow Control Status"; + +char cysys_on[] = "on"; +char cysys_off[] = "off"; + +char cysys_dcd[] = "DCD "; +char cysys_dsr[] = "DSR "; +char cysys_cts[] = "CTS "; +char cysys_rts[] = "RTS "; +char cysys_dtr[] = "DTR "; + +char cysys_ttyrxbuf[] = "TTY Rx Buffer "; +char cysys_ttytxbuf[] = "TTY Tx Buffer "; + +char cysys_boardrxbuf[] = "On Board Rx Buffer "; +char cysys_boardtxbuf[] = "On Board Tx Buffer "; + +char cysys_charlen[] = "Character Len "; + /* * CH_CTRL - This per port structure contains all parameters * that control an specific port. It can be seen as the @@ -823,5 +878,267 @@ /***************************************************************************/ + + +/*used for sysfs register purposes */ +static ssize_t show_sys_data(struct device *p, char *buf); + +struct device_attribute _cydas[]={\ +__ATTR(cycser0, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser1, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser2, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser3, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser4, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser5, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser6, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser7, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser8, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser9, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser10, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser11, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser12, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser13, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser14, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser15, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser16, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser17, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser18, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser19, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser20, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser21, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser22, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser23, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser24, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser25, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser26, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser27, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser28, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser29, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser30, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser31, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser32, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser33, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser34, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser35, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser36, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser37, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser38, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser39, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser40, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser41, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser42, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser43, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser44, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser45, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser46, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser47, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser48, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser49, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser50, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser51, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser52, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser53, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser54, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser55, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser56, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser57, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser58, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser59, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser60, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser61, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser62, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser63, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser64, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser65, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser66, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser67, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser68, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser69, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser70, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser71, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser72, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser73, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser74, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser75, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser76, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser77, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser78, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser79, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser80, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser81, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser82, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser83, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser84, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser85, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser86, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser87, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser88, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser89, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser90, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser91, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser92, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser93, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser94, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser95, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser96, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser97, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser98, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser99, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser100, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser101, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser102, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser103, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser104, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser105, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser106, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser107, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser108, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser109, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser110, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser111, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser112, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser113, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser114, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser115, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser116, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser117, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser118, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser119, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser120, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser121, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser122, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser123, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser124, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser125, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser126, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser127, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser128, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser129, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser130, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser131, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser132, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser133, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser134, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser135, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser136, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser137, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser138, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser139, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser140, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser141, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser142, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser143, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser144, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser145, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser146, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser147, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser148, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser149, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser150, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser151, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser152, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser153, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser154, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser155, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser156, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser157, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser158, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser159, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser160, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser161, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser162, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser163, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser164, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser165, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser166, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser167, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser168, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser169, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser170, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser171, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser172, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser173, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser174, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser175, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser176, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser177, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser178, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser179, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser180, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser181, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser182, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser183, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser184, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser185, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser186, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser187, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser188, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser189, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser190, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser191, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser192, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser193, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser194, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser195, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser196, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser197, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser198, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser199, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser200, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser201, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser202, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser203, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser204, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser205, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser206, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser207, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser208, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser209, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser210, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser211, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser212, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser213, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser214, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser215, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser216, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser217, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser218, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser219, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser220, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser221, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser222, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser223, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser224, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser225, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser226, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser227, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser228, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser229, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser230, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser231, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser232, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser233, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser234, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser235, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser236, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser237, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser238, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser239, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser240, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser241, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser242, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser243, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser244, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser245, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser246, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser247, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser248, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser249, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser250, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser251, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser252, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser253, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser254, S_IRUGO, show_sys_data, NULL), +__ATTR(cycser255, S_IRUGO, show_sys_data, NULL)}; #endif /* __KERNEL__ */ #endif /* _LINUX_CYCLADES_H */ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/