Message-ID: <415FFE77.7090908@HasBox.COM>
Date: Sun, 03 Oct 2004 17:28:23 +0400
From: Mitch <Mitch@HasBox.COM>
User-Agent: Application 0.6+ (X11/20041001)
MIME-Version: 1.0
To: ottdot@magma.ca, pavel@suse.cz, linux-kernel@vger.kernel.org
Subject: Re: 2.6.9-rc3 software suspend (pmdisk) stopped working
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1522
Lines: 45

Hi Jesse,

as shown below, that is  not one of the options presented to me in my 
'disk' file

% cat /sys/power/disk
shutdown

My machine can only use the shutdown keyword - which worked in -rc3.

Mitch

-------- Original Message --------
Subject: Re: 2.6.9-rc3 software suspend (pmdisk) stopped working
Date: Sun, 03 Oct 2004 09:12:52 -0400
From: Jesse <ottdot@magma.ca>
To: Mitch <Mitch@0Bits.COM>
CC: pavel@suse.cz, linux-kernel@vger.kernel.org
References: <415FFA57.8040601@0Bits.COM>

Mitch wrote:
> Hi,
> 
> Ok, here is the kernel messages attached. Nothing of real value in it as 
> far as i can see (even with PM_DEBUG on), but you may spot something. 
> Basically the suspend process appears to start but the machine is never 
> powered off and the resume kernel routines are run immediately bringing 
> the kernel/system back to it's resumed state. The *same* kernel config 
> works on -rc2. If i hard power off the machine then i have to fsck my 
> disks on bootup (as expected) and the suspended image is not loaded.
> Clearly the latest patches have broken something but what ? Can anyone 
> else without ACPI suspend on -rc3 ?
> 

It's working for me on my Thinkpad 600x (ACPI is not compiled in) Used
'reboot' command from Documentation.power/swsusp.txt

Jesse


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/