Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S269864AbUJTKxZ (ORCPT ); Wed, 20 Oct 2004 06:53:25 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S269401AbUJTKwD (ORCPT ); Wed, 20 Oct 2004 06:52:03 -0400 Received: from jstevenson.plus.com ([212.159.71.212]:26499 "EHLO beast.stev.org") by vger.kernel.org with ESMTP id S269864AbUJTKov (ORCPT ); Wed, 20 Oct 2004 06:44:51 -0400 Date: Wed, 20 Oct 2004 12:18:02 +0100 (BST) From: James Stevenson To: Hans-Peter Jansen cc: linux-ide@vger.kernel.org, , , James Stevenson Subject: Re: ATA/133 Problems with multiple cards In-Reply-To: <200410201235.37423.hpj@urpla.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1791 Lines: 44 On Wed, 20 Oct 2004, Hans-Peter Jansen wrote: > [Heavily stripped address lists] > > On Sunday 17 October 2004 04:51, James Stevenson wrote: > > > > then i can only turn the dma up to ATA/100 if i set it to ata/133 > > it will cause the errors. I assume this is something todo with the > > promise bois not setting up the 3rd card at boot time. It only > > shows drive listing for 2 of the 3 cards. > > As noted before, this effect was always related to different firmware > versions on the cards here. Please check boot messages of all cards > separately, and confirm, that this isn't your problem. I had them all flashed to the latest current version which was 2.20.0.15 when i started having problems. Each card was verified to that version as well. Some did have older firmware on them. The same problems were seen before / after flashign the card. As far as i could tell the promise bios will run form the first card and init the other cards it could be configuring something there which nobody else is aware of. However this only showed drives / drive interfaces form the first 2 cards never the 3rd card. After the bios has init'ed the carss the bios doesnt run on any other cards. When booting the machine will 3 cards and no drives attached the bios is loaded and unloaded 3 times. This is why i belave something is getting enable / disabled on the other cards by the bios. James -- -------------------------- Mobile: +44 07779080838 http://www.stev.org 12:10pm up 19:08, 5 users, load average: 3.90, 3.83, 3.49 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/