Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S271103AbUJVASh (ORCPT ); Thu, 21 Oct 2004 20:18:37 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S271107AbUJVARL (ORCPT ); Thu, 21 Oct 2004 20:17:11 -0400 Received: from cpu1185.adsl.bellglobal.com ([207.236.110.166]:58502 "EHLO mail.rtr.ca") by vger.kernel.org with ESMTP id S271147AbUJVAJn (ORCPT ); Thu, 21 Oct 2004 20:09:43 -0400 Message-ID: <41784F51.5000308@rtr.ca> Date: Thu, 21 Oct 2004 20:07:45 -0400 From: Mark Lord User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.3) Gecko/20040913 X-Accept-Language: en, en-us MIME-Version: 1.0 To: Bartlomiej Zolnierkiewicz Cc: Alan Cox , Linux Kernel Mailing List , Marcelo Tosatti Subject: Re: [PATCH 2.4.28-pre4-bk6] delkin_cb: new driver for Cardbus IDE CF adaptor References: <41780393.3000606@rtr.ca> <58cb370e041021121317083a3a@mail.gmail.com> <1098394354.17096.174.camel@localhost.localdomain> <41783CDF.80007@rtr.ca> <58cb370e04102115572e992d75@mail.gmail.com> In-Reply-To: <58cb370e04102115572e992d75@mail.gmail.com> Content-Type: multipart/mixed; boundary="------------030000050704050804020708" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8921 Lines: 249 This is a multi-part message in MIME format. --------------030000050704050804020708 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Bartlomiej Zolnierkiewicz wrote: > > Therefore 2.4 version is OK with me. Great. Marcelo, here is an updated 2.4 patch, which replaces the original. The changes are a spelling correction, and I've added a precautionary memset(0) on the hw struct before populating it (copied back from 2.6). This is a driver for the Delkin/ASKA/Workbit cardbus CF adapter. Signed-off-by: Mark Lord -- Mark Lord (hdparm keeper & the original "Linux IDE Guy") --------------030000050704050804020708 Content-Type: text/plain; name="delkin_cb-2.4.28-bk4.patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="delkin_cb-2.4.28-bk4.patch" diff -u --recursive --new-file --exclude='.*' linux-2.4.28-pre4-bk6/Documentation/Configure.help linux/Documentation/Configure.help --- linux-2.4.28-pre4-bk6/Documentation/Configure.help 2004-10-21 11:02:17.000000000 -0400 +++ linux/Documentation/Configure.help 2004-10-21 19:38:35.000000000 -0400 @@ -781,6 +781,13 @@ . The module will be called ide-cs.o +Cardbus IDE support (Delkin/ASKA/Workbit) +CONFIG_BLK_DEV_DELKIN + Support for Delkin/ASKA/Workbit cardbus CompactFlash Adapters. + This may also work for similar SD and XD adapters. If you want + to be able to use one of these, then say M here. The module will + be called delkin_cb.o + Include IDE/ATAPI CD-ROM support CONFIG_BLK_DEV_IDECD If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is diff -u --recursive --new-file --exclude='.*' linux-2.4.28-pre4-bk6/drivers/ide/Config.in linux/drivers/ide/Config.in --- linux-2.4.28-pre4-bk6/drivers/ide/Config.in 2004-10-21 11:02:18.000000000 -0400 +++ linux/drivers/ide/Config.in 2004-10-21 11:46:05.000000000 -0400 @@ -18,6 +18,7 @@ dep_mbool ' Auto-Geometry Resizing support' CONFIG_IDEDISK_STROKE $CONFIG_BLK_DEV_IDEDISK dep_tristate ' PCMCIA IDE support' CONFIG_BLK_DEV_IDECS $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA + dep_tristate ' Cardbus IDE support (Delkin/ASKA/Workbit)' CONFIG_BLK_DEV_DELKIN $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA $CONFIG_PCI dep_tristate ' Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE dep_tristate ' Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE dep_tristate ' Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE diff -u --recursive --new-file --exclude='.*' linux-2.4.28-pre4-bk6/drivers/ide/pci/delkin_cb.c linux/drivers/ide/pci/delkin_cb.c --- linux-2.4.28-pre4-bk6/drivers/ide/pci/delkin_cb.c 1969-12-31 19:00:00.000000000 -0500 +++ linux/drivers/ide/pci/delkin_cb.c 2004-10-21 17:47:33.000000000 -0400 @@ -0,0 +1,149 @@ +/* + * linux/drivers/ide/pci/delkin_cb.c + * + * Created 21 Oct 2004 by Mark Lord + * + * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter + * + * Modeled after the 16-bit PCMCIA driver: ide-cs.c + * + * This is slightly peculiar, in that it is a PCI driver, + * but is NOT an IDE PCI driver -- the IDE layer does not directly + * support hot insertion/removal of PCI interfaces, so this driver + * is unable to use the IDE PCI interfaces. Instead, it uses the + * same interfaces as the ide-cs (PCMCIA) driver uses. + * On the plus side, the driver is also smaller/simpler this way. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * No chip documentation has yet been found, + * so these configuration values were pulled from + * a running Win98 system using "debug". + * This gives around 3MByte/second read performance, + * which is about 2/3 of what the chip is capable of. + * + * There is also a 4KByte mmio region on the card, + * but its purpose has yet to be reverse-engineered. + */ +static const u8 setup[] = { + 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00, + 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13, +}; + +static int __devinit +delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) +{ + unsigned long base; + hw_regs_t hw; + ide_hwif_t *hwif = NULL; + ide_drive_t *drive; + int i, rc; + + MOD_INC_USE_COUNT; + rc = pci_enable_device(dev); + if (rc) { + printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc); + return rc; + } + rc = pci_request_regions(dev, "delkin_cb"); + if (rc) { + printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc); + pci_disable_device(dev); + return rc; + } + base = pci_resource_start(dev, 0); + outb(0x02, base + 0x1e); /* set nIEN to block interrupts */ + inb(base + 0x17); /* read status to clear interrupts */ + for (i = 0; i < sizeof(setup); ++i) { + if (setup[i]) + outb(setup[i], base + i); + } + pci_release_regions(dev); /* IDE layer handles regions itself */ + + memset(&hw, 0, sizeof(hw)); + ide_init_hwif_ports(&hw, (ide_ioreg_t)(base + 0x10), + (ide_ioreg_t)(base + 0x1e), NULL); + hw.irq = dev->irq; + hw.chipset = ide_pci; /* this enables IRQ sharing */ + + rc = ide_register_hw(&hw, &hwif); + if (rc < 0) /* ide_register_hw likes to be invoked twice (buggy) */ + rc = ide_register_hw(&hw, &hwif); + if (rc < 0) { + printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc); + MOD_DEC_USE_COUNT; + return -ENODEV; + } + pci_set_drvdata(dev, hwif); + hwif->pci_dev = dev; + drive = &hwif->drives[0]; + if (drive->present) { + drive->id->csfo = 0; /* workaround for idedisk_open bug */ + drive->io_32bit = 1; + drive->unmask = 1; + } + return 0; +} + +static void +delkin_cb_remove (struct pci_dev *dev) +{ + ide_hwif_t *hwif = pci_get_drvdata(dev); + + if (hwif) { + ide_unregister(hwif->index); + MOD_DEC_USE_COUNT; + } + pci_disable_device(dev); +} + +static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_WORKBIT, PCI_DEVICE_ID_WORKBIT_CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl); + +static struct pci_driver driver = { + .name = "Delkin/ASKA/Workbit Cardbus IDE", + .id_table = delkin_cb_pci_tbl, + .probe = delkin_cb_probe, + .remove = delkin_cb_remove, +}; + +static int +delkin_cb_init (void) +{ + return pci_module_init(&driver); +} + +static void +delkin_cb_exit (void) +{ + pci_unregister_driver(&driver); +} + +module_init(delkin_cb_init); +module_exit(delkin_cb_exit); + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE"); +MODULE_LICENSE("GPL"); + +EXPORT_NO_SYMBOLS; + diff -u --recursive --new-file --exclude='.*' linux-2.4.28-pre4-bk6/drivers/ide/pci/Makefile linux/drivers/ide/pci/Makefile --- linux-2.4.28-pre4-bk6/drivers/ide/pci/Makefile 2004-04-14 09:05:29.000000000 -0400 +++ linux/drivers/ide/pci/Makefile 2004-10-21 11:46:20.000000000 -0400 @@ -34,6 +34,7 @@ obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o +obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o # Must appear at the end of the block obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o diff -u --recursive --new-file --exclude='.*' linux-2.4.28-pre4-bk6/drivers/scsi/nsp32.h linux/drivers/scsi/nsp32.h --- linux-2.4.28-pre4-bk6/drivers/scsi/nsp32.h 2003-11-28 13:26:20.000000000 -0500 +++ linux/drivers/scsi/nsp32.h 2004-10-21 11:31:03.000000000 -0400 @@ -22,7 +22,6 @@ * VENDOR/DEVICE ID */ #define PCI_VENDOR_ID_IODATA 0x10fc -#define PCI_VENDOR_ID_WORKBIT 0x1145 #define PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II 0x0005 #define PCI_DEVICE_ID_NINJASCSI_32BI_KME 0xf007 diff -u --recursive --new-file --exclude='.*' linux-2.4.28-pre4-bk6/include/linux/pci_ids.h linux/include/linux/pci_ids.h --- linux-2.4.28-pre4-bk6/include/linux/pci_ids.h 2004-10-21 11:02:21.000000000 -0400 +++ linux/include/linux/pci_ids.h 2004-10-21 11:16:32.000000000 -0400 @@ -2057,3 +2057,6 @@ #define PCI_DEVICE_ID_MICROGATE_USC 0x0010 #define PCI_DEVICE_ID_MICROGATE_SCC 0x0020 #define PCI_DEVICE_ID_MICROGATE_SCA 0x0030 + +#define PCI_VENDOR_ID_WORKBIT 0x1145 +#define PCI_DEVICE_ID_WORKBIT_CB 0xf021 --------------030000050704050804020708-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/