Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261232AbUJYSdx (ORCPT ); Mon, 25 Oct 2004 14:33:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261228AbUJYSZX (ORCPT ); Mon, 25 Oct 2004 14:25:23 -0400 Received: from rproxy.gmail.com ([64.233.170.197]:25821 "EHLO rproxy.gmail.com") by vger.kernel.org with ESMTP id S261166AbUJYSVj (ORCPT ); Mon, 25 Oct 2004 14:21:39 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:references; b=HPk3R8cMGZrUtbjoqelBdkHY3fT41kkUf9PmYbuAvz0onrhclWdJY3USwCWNaidhTY0Q4YOMqlo1LunWlo6SxNflM/hlwHAP9Io4KWn+MfC8d15J8wLM2d8qPPl8k6NLCdH1YTpzp2pYk9sKoRrq4HlRllZRjWnz4jCmV0GWkm0= Message-ID: <70fda320410251121f1a1beb@mail.gmail.com> Date: Mon, 25 Oct 2004 13:21:36 -0500 From: micah milano Reply-To: micah milano To: linux-kernel@vger.kernel.org Subject: Re: Serial over LAN console stops printing In-Reply-To: <70fda3204102510383294a24@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit References: <70fda3204102510383294a24@mail.gmail.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17651 Lines: 393 When booting with apic=off, the console prints a little bit more, before it stops: ta, 208k init, 130496k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5521.40 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 1024K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05 per-CPU timeslice cutoff: 1462.65 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Booting with kernel option "noapic" gives: ta, 208k init, 130496k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5521.40 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 1024K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. On Mon, 25 Oct 2004 12:38:50 -0500, micah milano wrote: > I've got an IPMI 1.5 card from SuperMicro (so it has the backported > IBM serial over lan capability that is normally in 2.0) in a X5DPR-TP+ > motherboard with a single P4 HT Xeon CPU. Using kernel 2.4.25 I am > able to utilize the serial over lan console of the IPMI card without > problems (I can see the bootup all the way to the login). However, > with a 2.6.7 kernel, the console ceases to print right after > "Initializing CPU#0"... I've been searching the list and the web all > weekend trying to figure out what is going on, but most of the > problems people have had that are similar relate to failing to > configure VGA_CONSOLE, but as you'll see, that is not the case in my > config (config attached to this message): > > # CONFIG_NETCONSOLE is not set > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_CORE_CONSOLE=y > CONFIG_VGA_CONSOLE=y > # CONFIG_MDA_CONSOLE is not set > CONFIG_DUMMY_CONSOLE=y > > The machine boots all the way up, but that is not visible on the console. > > Here is everything I see on the console: > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 15:2 APIC version 20 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) > IOAPIC[0]: Assigned apic_id 2 > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x03] address[0xfec80000] global_irq_base[0x18]) > IOAPIC[1]: Assigned apic_id 3 > IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 > ACPI: IOAPIC (id[0x04] address[0xfec80400] global_irq_base[0x30]) > IOAPIC[2]: Assigned apic_id 4 > IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > Enabling APIC mode: Flat. Using 3 I/O APICs > Using ACPI (MADT) for SMP configuration information > Built 1 zonelists > Kernel command line: root=/dev/md0 ro > Initializing CPU#0 > > Here is what is in my dmseg immediately after boot (note: the first > part of ACPI is cut off in the dmesg as well): > > I: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *5 > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICH3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.PH2A._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.PH2B._PRT] > SCSI subsystem initialized > 00:00:1f[A] -> 2-18 -> IRQ 18 level low > 00:00:1f[B] -> 2-17 -> IRQ 17 level low > 00:00:1d[A] -> 2-16 -> IRQ 16 level low > 00:00:1d[B] -> 2-19 -> IRQ 19 level low > 00:03:01[A] -> 3-0 -> IRQ 24 level low > 00:03:01[B] -> 3-1 -> IRQ 25 level low > 00:03:01[C] -> 3-2 -> IRQ 26 level low > 00:03:01[D] -> 3-3 -> IRQ 27 level low > 00:02:01[A] -> 4-0 -> IRQ 48 level low > 00:02:01[B] -> 4-1 -> IRQ 49 level low > 00:02:01[C] -> 4-2 -> IRQ 50 level low > 00:02:01[D] -> 4-3 -> IRQ 51 level low > 00:02:02[A] -> 4-4 -> IRQ 52 level low > 00:02:02[B] -> 4-5 -> IRQ 53 level low > 00:02:03[A] -> 4-6 -> IRQ 54 level low > 00:02:03[B] -> 4-7 -> IRQ 55 level low > number of MP IRQ sources: 15. > number of IO-APIC #2 registers: 24. > number of IO-APIC #3 registers: 24. > number of IO-APIC #4 registers: 24. > testing the IO APIC....................... > IO APIC #2...... > .... register #00: 02008000 > ....... : physical APIC id: 02 > ....... : Delivery Type: 1 > ....... : LTS : 0 > .... register #01: 00178020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 1 > ....... : IO APIC version: 0020 > .... register #02: 00000000 > ....... : arbitration: 00 > .... register #03: 00000001 > ....... : Boot DT : 1 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 000 00 1 0 0 0 0 0 0 00 > 01 003 03 0 0 0 0 0 1 1 39 > 02 003 03 0 0 0 0 0 1 1 31 > 03 003 03 0 0 0 0 0 1 1 41 > 04 003 03 0 0 0 0 0 1 1 49 > 05 003 03 0 0 0 0 0 1 1 51 > 06 003 03 0 0 0 0 0 1 1 59 > 07 003 03 0 0 0 0 0 1 1 61 > 08 003 03 0 0 0 0 0 1 1 69 > 09 003 03 0 1 0 0 0 1 1 71 > 0a 003 03 0 0 0 0 0 1 1 79 > 0b 003 03 0 0 0 0 0 1 1 81 > 0c 003 03 0 0 0 0 0 1 1 89 > 0d 003 03 0 0 0 0 0 1 1 91 > 0e 003 03 0 0 0 0 0 1 1 99 > 0f 003 03 0 0 0 0 0 1 1 A1 > 10 003 03 1 1 0 1 0 1 1 B9 > 11 003 03 1 1 0 1 0 1 1 B1 > 12 003 03 1 1 0 1 0 1 1 A9 > 13 003 03 1 1 0 1 0 1 1 C1 > 14 000 00 1 0 0 0 0 0 0 00 > 15 000 00 1 0 0 0 0 0 0 00 > 16 000 00 1 0 0 0 0 0 0 00 > 17 000 00 1 0 0 0 0 0 0 00 > IO APIC #3...... > .... register #00: 03000000 > ....... : physical APIC id: 03 > ....... : Delivery Type: 0 > ....... : LTS : 0 > .... register #01: 00178020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 1 > ....... : IO APIC version: 0020 > .... register #02: 03000000 > ....... : arbitration: 03 > .... register #03: 00000001 > ....... : Boot DT : 1 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 003 03 1 1 0 1 0 1 1 C9 > 01 003 03 1 1 0 1 0 1 1 D1 > 02 003 03 1 1 0 1 0 1 1 D9 > 03 003 03 1 1 0 1 0 1 1 E1 > 04 000 00 1 0 0 0 0 0 0 00 > 05 000 00 1 0 0 0 0 0 0 00 > 06 000 00 1 0 0 0 0 0 0 00 > 07 000 00 1 0 0 0 0 0 0 00 > 08 000 00 1 0 0 0 0 0 0 00 > 09 000 00 1 0 0 0 0 0 0 00 > 0a 000 00 1 0 0 0 0 0 0 00 > 0b 000 00 1 0 0 0 0 0 0 00 > 0c 000 00 1 0 0 0 0 0 0 00 > 0d 000 00 1 0 0 0 0 0 0 00 > 0e 000 00 1 0 0 0 0 0 0 00 > 0f 000 00 1 0 0 0 0 0 0 00 > 10 000 00 1 0 0 0 0 0 0 00 > 11 000 00 1 0 0 0 0 0 0 00 > 12 000 00 1 0 0 0 0 0 0 00 > 13 000 00 1 0 0 0 0 0 0 00 > 14 000 00 1 0 0 0 0 0 0 00 > 15 000 00 1 0 0 0 0 0 0 00 > 16 000 00 1 0 0 0 0 0 0 00 > 17 000 00 1 0 0 0 0 0 0 00 > IO APIC #4...... > .... register #00: 04000000 > ....... : physical APIC id: 04 > ....... : Delivery Type: 0 > ....... : LTS : 0 > .... register #01: 00178020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 1 > ....... : IO APIC version: 0020 > .... register #02: 04000000 > ....... : arbitration: 04 > .... register #03: 00000001 > ....... : Boot DT : 1 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 003 03 1 1 0 1 0 1 1 E9 > 01 003 03 1 1 0 1 0 1 1 32 > 02 003 03 1 1 0 1 0 1 1 3A > 03 003 03 1 1 0 1 0 1 1 42 > 04 003 03 1 1 0 1 0 1 1 4A > 05 003 03 1 1 0 1 0 1 1 52 > 06 003 03 1 1 0 1 0 1 1 5A > 07 003 03 1 1 0 1 0 1 1 62 > 08 000 00 1 0 0 0 0 0 0 00 > 09 000 00 1 0 0 0 0 0 0 00 > 0a 000 00 1 0 0 0 0 0 0 00 > 0b 000 00 1 0 0 0 0 0 0 00 > 0c 000 00 1 0 0 0 0 0 0 00 > 0d 000 00 1 0 0 0 0 0 0 00 > 0e 000 00 1 0 0 0 0 0 0 00 > 0f 000 00 1 0 0 0 0 0 0 00 > 10 000 00 1 0 0 0 0 0 0 00 > 11 000 00 1 0 0 0 0 0 0 00 > 12 000 00 1 0 0 0 0 0 0 00 > 13 000 00 1 0 0 0 0 0 0 00 > 14 000 00 1 0 0 0 0 0 0 00 > 15 000 00 1 0 0 0 0 0 0 00 > 16 000 00 1 0 0 0 0 0 0 00 > 17 000 00 1 0 0 0 0 0 0 00 > IRQ to pin mappings: > IRQ0 -> 0:2 > IRQ1 -> 0:1 > IRQ3 -> 0:3 > IRQ4 -> 0:4 > IRQ5 -> 0:5 > IRQ6 -> 0:6 > IRQ7 -> 0:7 > IRQ8 -> 0:8 > IRQ9 -> 0:9 > IRQ10 -> 0:10 > IRQ11 -> 0:11 > IRQ12 -> 0:12 > IRQ13 -> 0:13 > IRQ14 -> 0:14 > IRQ15 -> 0:15 > IRQ16 -> 0:16 > IRQ17 -> 0:17 > IRQ18 -> 0:18 > IRQ19 -> 0:19 > IRQ24 -> 1:0 > IRQ25 -> 1:1 > IRQ26 -> 1:2 > IRQ27 -> 1:3 > IRQ48 -> 2:0 > IRQ49 -> 2:1 > IRQ50 -> 2:2 > IRQ51 -> 2:3 > IRQ52 -> 2:4 > IRQ53 -> 2:5 > IRQ54 -> 2:6 > IRQ55 -> 2:7 > .................................... done. > PCI: Using ACPI for IRQ routing > Simple Boot Flag at 0x36 set to 0x1 > Machine check exception polling timer started. > IA-32 Microcode Update Driver: v1.13 > Starting balanced_irq > highmem bounce pool size: 64 pages > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) > devfs: boot_options: 0x0 > udf: registering filesystem > Initializing Cryptographic API > ACPI: Power Button (FF) [PWRF] > ACPI: Processor [CPU0] (supports C1) > ACPI: Processor [CPU1] (supports C1) > Real Time Clock Driver v1.12 > Non-volatile memory driver v1.2 > hw_random hardware driver 1.0.0 loaded > Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > Using anticipatory io scheduler > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > loop: loaded (max 8 devices) > nbd: registered device at major 43 > Intel(R) PRO/1000 Network Driver - version 5.2.52-k4 > Copyright (c) 1999-2004 Intel Corporation. > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH3: IDE controller at PCI slot 0000:00:1f.1 > ICH3: chipset revision 2 > ICH3: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio > hdc: CD-224E, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > SiI3112 Serial ATA: IDE controller at PCI slot 0000:03:02.0 > SiI3112 Serial ATA: chipset revision 2 > SiI3112 Serial ATA: 100% native mode on irq 26 > ide2: MMIO-DMA , BIOS settings: hde:DMA, hdf:DMA > ide3: MMIO-DMA , BIOS settings: hdg:DMA, hdh:DMA > hde: Maxtor 6Y120M0, ATA DISK drive > ide2 at 0xf8858080-0xf8858087,0xf885808a on irq 26 > hdg: Maxtor 6Y120M0, ATA DISK drive > ide3 at 0xf88580c0-0xf88580c7,0xf88580ca on irq 26 > SiI3112 Serial ATA: IDE controller at PCI slot 0000:03:03.0 > SiI3112 Serial ATA: chipset revision 2 > SiI3112 Serial ATA: 100% native mode on irq 27 > ide4: MMIO-DMA , BIOS settings: hdi:pio, hdj:pio > ide5: MMIO-DMA , BIOS settings: hdk:pio, hdl:pio > hdi: no response (status = 0xfe) > hdk: no response (status = 0xfe) > hdi: no response (status = 0xfe), resetting drive > hdi: no response (status = 0xfe) > hdk: no response (status = 0xfe), resetting drive > hdk: no response (status = 0xfe) > hde: max request size: 64KiB > hde: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63 > /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 > > hdg: max request size: 64KiB > hdg: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63 > /dev/ide/host2/bus1/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 > > hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > libata version 1.02 loaded. > mice: PS/2 mouse device common for all mice > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > input: AT Translated Set 2 keyboard on isa0060/serio0 > i2c /dev entries driver > md: linear personality registered as nr 1 > md: raid0 personality registered as nr 2 > md: raid1 personality registered as nr 3 > md: raid5 personality registered as nr 4 > raid5: measuring checksumming speed > 8regs : 3244.000 MB/sec > 8regs_prefetch: 2904.000 MB/sec > 32regs : 2144.000 MB/sec > 32regs_prefetch: 1960.000 MB/sec > pIII_sse : 3648.000 MB/sec > pII_mmx : 4624.000 MB/sec > p5_mmx : 4536.000 MB/sec > raid5: using function: pIII_sse (3648.000 MB/sec) > md: multipath personality registered as nr 7 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com > NET: Registered protocol family 2 > IP: routing cache hash table of 8192 buckets, 64Kbytes > TCP: Hash tables configured (established 262144 bind 65536) > ip_conntrack version 2.1 (8188 buckets, 65504 max) - 300 bytes per conntrack > ip_tables: (C) 2000-2002 Netfilter core team > ipt_recent v0.3.1: Stephen Frost . http://snowman.net/proje > cts/ipt_recent/ > arp_tables: (C) 2002 David S. Miller > NET: Registered protocol family 1 > NET: Registered protocol family 10 > IPv6 over IPv4 tunneling driver > ip6_tables: (C) 2000-2002 Netfilter core team > registering ipv6 mark target > NET: Registered protocol family 17 > NET: Registered protocol family 15 > md: Autodetecting RAID arrays. > md: autorun ... > > [snip] > > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/