Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 26 Apr 2001 04:43:36 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 26 Apr 2001 04:43:27 -0400 Received: from a29d2hel.dial.kolumbus.fi ([212.54.16.29]:59528 "EHLO darkmoon.imagesoft.fi") by vger.kernel.org with ESMTP id ; Thu, 26 Apr 2001 04:43:15 -0400 Message-ID: <3AE7DF69.C5397FBA@imagesoft.fi> Date: Thu, 26 Apr 2001 11:42:17 +0300 From: Jussi Laako Organization: Image Soft Oy X-Mailer: Mozilla 4.77 [en] (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org CC: andre@linux-ide.org Subject: 2.4.3-ac14 deadlocks on PDC20265 w/o noautotune Content-Type: multipart/mixed; boundary="------------375F914D96F97E5E9B9023DA" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------375F914D96F97E5E9B9023DA Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, 2.4.3-ac14 still deadlocks with PDC20265 (on ASUS A7V133) when using without noautotune. System starts up, but lockups in few minutes with HDD led burning. System is RedHat 7.1, but gcc-2.95.3 is used to compile the kernel. dmesg and config attached. Best regards, - Jussi Laako P.S. Just wondering why kernel reports MTRR as being type "Intel" when CPU is Duron/800... -- PGP key fingerprint: 3827 6A53 B7F9 180E D971 362B BB53 C8A1 B578 D249 Available at: ldap://certserver.pgp.com --------------375F914D96F97E5E9B9023DA Content-Type: text/plain; charset=us-ascii; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Linux version 2.4.3-ac14 (root@davinci) (gcc version 2.95.3 20010315 (release)) #1 Wed Apr 25 13:36:33 EEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fec000 (usable) BIOS-e820: 0000000007fec000 - 0000000007fef000 (ACPI data) BIOS-e820: 0000000007fef000 - 0000000007fff000 (reserved) BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 32748 zone(0): 4096 pages. zone(1): 28652 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=2104 BOOT_FILE=/boot/vmlinuz ide0=noautotune ide1=noautotune ide2=noautotune ide3=noautotune panic=60 ide_setup: ide0=noautotune ide_setup: ide1=noautotune ide_setup: ide2=noautotune ide_setup: ide3=noautotune Initializing CPU#0 Detected 807.211 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1608.90 BogoMIPS Memory: 126904k/130992k available (861k kernel code, 3696k reserved, 217k data, 188k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) VFS: Diskquotas version dquot_6.5.0 initialized CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: AMD Duron(tm) Processor stepping 01 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1150, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/0686] at 00:04.0 Applying VIA PCI latency patch. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 84280kB/28093kB, 256 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 21 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1 ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio PDC20265: IDE controller on PCI bus 00 dev 88 PCI: Found IRQ 10 for device 00:11.0 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0x7400-0x7407, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0x7408-0x740f, BIOS settings: hdg:DMA, hdh:DMA hda: SONY CDU4811, ATAPI CD/DVD-ROM drive hde: IBM-DTLA-307030, ATA DISK drive hdf: IBM-DTLA-307030, ATA DISK drive hdg: IBM-DTLA-307030, ATA DISK drive hdh: IBM-DTLA-307030, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide2 at 0x8800-0x8807,0x8402 on irq 10 ide3 at 0x8000-0x8007,0x7802 on irq 10 hde: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 hdf: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 hdg: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 hdh: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 Partition check: hde: [PTBL] [3737/255/63] hde1 hde2 hde3 hde4 hdf: unknown partition table hdg: unknown partition table hdh: unknown partition table ACPI: APM is already active, exiting raid5 personality registered raid5: measuring checksumming speed 8regs : 1233.200 MB/sec 32regs : 1090.800 MB/sec pII_mmx : 1889.600 MB/sec p5_mmx : 2418.400 MB/sec raid5: using function: p5_mmx (2418.400 MB/sec) md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md.c: sizeof(mdp_super_t) = 4096 autodetecting RAID arrays autorun ... ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 188k freed Adding Swap: 265064k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.251 $ time 13:41:56 Apr 25 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 5 for device 00:04.2 PCI: The same IRQ used for device 00:04.3 PCI: The same IRQ used for device 00:09.0 usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:04.3 PCI: The same IRQ used for device 00:04.2 PCI: The same IRQ used for device 00:09.0 usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected (read) hdf's sb offset: 30018176 [events: 00000022] (read) hdg's sb offset: 30018176 [events: 00000022] (read) hdh's sb offset: 30018176 [events: 00000022] autorun ... considering hdh ... adding hdh ... adding hdg ... adding hdf ... created md0 bind bind bind running: now! hdh's event counter: 00000022 hdg's event counter: 00000022 hdf's event counter: 00000022 md: md0: raid array is not clean -- starting background reconstruction md0: max total readahead window set to 512k md0: 2 data-disks, max readahead per data-disk: 256k raid5: device hdh operational as raid disk 2 raid5: device hdg operational as raid disk 1 raid5: device hdf operational as raid disk 0 raid5: allocated 3264kB for md0 raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2 raid5: raid set md0 not clean; reconstructing parity RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdf disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdg disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdh RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdf disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdg disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdh md: updating md0 RAID superblock on device hdh [events: 00000023](write) hdh's sb offset: 30018176 md: syncing RAID array md0 md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc. md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction. md: using 124k window, over a total of 30018176 blocks. hdg [events: 00000023](write) hdg's sb offset: 30018176 hdf [events: 00000023](write) hdf's sb offset: 30018176 . ... autorun DONE. raid5: switching cache buffer size, 4096 --> 1024 raid5: switching cache buffer size, 1024 --> 4096 reiserfs: checking transaction log (device 09:00) ... Using r5 hash to sort names ReiserFS version 3.6.25 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 15 for device 00:0a.0 PCI: Found IRQ 15 for device 00:0a.0 (scsi0) found at PCI 0/10/0 (scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs (scsi0) Cables present (Int-50 NO, Ext-50 YES) (scsi0) Downloading sequencer code... 436 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0 Vendor: HP Model: C1537A Rev: L708 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:0:3:1) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : 0 hosts left. Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 8 0x378: readIntrThreshold is 8 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x00 0x378: ECP settings irq= dma= parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,COMPAT,ECP] parport0: cpp_daisy: aa5500ff(98) parport0: assign_addrs: aa5500ff(98) parport0: No more nibble data (0 bytes) parport0: faking semi-colon parport0: Printer, Hewlett-Packard HP LaserJet 4000 Series SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 15 for device 00:0a.0 PCI: Found IRQ 15 for device 00:0a.0 (scsi0) found at PCI 0/10/0 (scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs (scsi0) Cables present (Int-50 NO, Ext-50 YES) (scsi0) Downloading sequencer code... 436 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0 Vendor: HP Model: C1537A Rev: L708 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:0:3:1) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : 0 hosts left. PCI: Found IRQ 5 for device 00:09.0 PCI: The same IRQ used for device 00:04.2 PCI: The same IRQ used for device 00:04.3 3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt eth0: 3Com PCI 3c905C Tornado at 0x9400, 00:01:02:dd:83:52, IRQ 5 product code 464a rev 00.13 date 10-10-00 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. eth0: scatter/gather enabled. h/w checksums enabled eth0: using NWAY device table, not 8 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 8 0x378: readIntrThreshold is 8 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x00 0x378: ECP settings irq= dma= parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,COMPAT,ECP] parport0: cpp_daisy: aa5500ff(98) parport0: assign_addrs: aa5500ff(98) parport0: No more nibble data (0 bytes) parport0: faking semi-colon parport0: Printer, Hewlett-Packard HP LaserJet 4000 Series lp0: using parport0 (interrupt-driven). Installing knfsd (copyright (C) 1996 okir@monad.swb.de). set_rtc_mmss: can't update from 0 to 59 md: md0: sync done. raid5: resync finished. SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 15 for device 00:0a.0 PCI: Found IRQ 15 for device 00:0a.0 (scsi0) found at PCI 0/10/0 (scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs (scsi0) Cables present (Int-50 NO, Ext-50 YES) (scsi0) Downloading sequencer code... 436 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0 Vendor: HP Model: C1537A Rev: L708 Type: Sequential-Access ANSI SCSI revision: 02 (scsi0:0:3:1) Synchronous at 10.0 Mbyte/sec, offset 15. st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Attached scsi tape st0 at scsi0, channel 0, id 3, lun 0 st0: Block limits 1 - 16777215 bytes. scsi : 0 hosts left. st: Unloaded. --------------375F914D96F97E5E9B9023DA Content-Type: application/x-ns-proxy-autoconfig; name="kernel.cfg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="kernel.cfg" # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_TOSHIBA is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # # General setup # CONFIG_NET=y # CONFIG_VISWS is not set CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_PM=y CONFIG_ACPI=y CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=y # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play configuration # CONFIG_PNP=y # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID5=y CONFIG_BLK_DEV_LVM=m # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=m # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD7409 is not set # CONFIG_AMD7409_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_PDC202XX=y # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_OSB4 is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI support # CONFIG_SCSI=m CONFIG_BLK_DEV_SD=m CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=m CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT=y CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 # CONFIG_AIC7XXX_OLD_PROC_STATS is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set CONFIG_VORTEX=m # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # CONFIG_INPUT=m CONFIG_INPUT_KEYBDEV=m CONFIG_INPUT_MOUSEDEV=m CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=m # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # # I2C support # CONFIG_I2C=m # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set CONFIG_I2C_CHARDEV=m # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=m CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # # Joysticks # # CONFIG_JOYSTICK is not set # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_SOFT_WATCHDOG=m # CONFIG_WDT is not set # CONFIG_WDTPCI is not set # CONFIG_PCWATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_MIXCOMWD is not set # CONFIG_I810_TCO is not set # CONFIG_MACHZ_WDT is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set CONFIG_RTC=m # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=m # CONFIG_AGP_INTEL is not set # CONFIG_AGP_I810 is not set CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set # CONFIG_DRM is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # CONFIG_VIDEO_PROC_FS=y CONFIG_I2C_PARPORT=m # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_W9966 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_ZR36120 is not set # # Radio Adapters # # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_MIROPCM20 is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # # File systems # CONFIG_QUOTA=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_CMS_FS is not set CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_MINIX_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_SYSV_FS_WRITE is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="iso8859-1" # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set CONFIG_USB_UHCI=m CONFIG_USB_UHCI_ALT=m CONFIG_USB_OHCI=m # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH is not set CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_FREECOM is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_HID=m CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m # CONFIG_USB_WACOM is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=m # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HP5300 is not set CONFIG_USB_IBMCAM=m CONFIG_USB_OV511=m # CONFIG_USB_DSBR is not set # CONFIG_USB_DABUSB is not set # CONFIG_USB_PLUSB is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_RIO500 is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set --------------375F914D96F97E5E9B9023DA-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/