Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261857AbUKVAWi (ORCPT ); Sun, 21 Nov 2004 19:22:38 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261858AbUKVAWi (ORCPT ); Sun, 21 Nov 2004 19:22:38 -0500 Received: from tantale.fifi.org ([216.27.190.146]:49033 "EHLO tantale.fifi.org") by vger.kernel.org with ESMTP id S261857AbUKVAVf (ORCPT ); Sun, 21 Nov 2004 19:21:35 -0500 To: linux-smp@vger.kernel.org Cc: linux@vger.kernel.org Subject: Unexpected I/O APIC on i386 2.4.28 / Tyan Thunder K8W (S2885) Mail-Copies-To: nobody From: Philippe Troin Date: 21 Nov 2004 16:19:41 -0800 Message-ID: <87actaohuq.fsf@ceramic.fifi.org> User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.2 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33890 Lines: 696 [Please CC me on the replies] This is seen on a dual-242 set-up with 2 GB of RAM running a i386 kernel (not x86_64). 2.4.27 also showed the problem. Enclosed is the dmesg log and the lspci -vvv output. Configuration available upon request (if it makes a difference). Phil. Linux version 2.4.28 (root@ceramic) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Thu Nov 18 15:39:58 PST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000fa000 reserved twice. hm, page 000fb000 reserved twice. On node 0 totalpages: 524272 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294896 pages. ACPI: RSDP (v002 ACPIAM ) @ 0x000f6a50 ACPI: XSDT (v001 A M I OEMXSDT 0x09000423 MSFT 0x00000097) @ 0x7fff0100 ACPI: FADT (v001 A M I OEMFACP 0x09000423 MSFT 0x00000097) @ 0x7fff0281 ACPI: MADT (v001 A M I OEMAPIC 0x09000423 MSFT 0x00000097) @ 0x7fff0380 ACPI: OEMB (v001 A M I OEMBIOS 0x09000423 MSFT 0x00000097) @ 0x7ffff040 ACPI: SRAT (v001 A M I OEMSRAT 0x09000423 MSFT 0x00000097) @ 0x7fff3be0 ACPI: HPET (v001 A M I OEMHPET 0x09000423 MSFT 0x00000097) @ 0x7fff3cd0 ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x7fff3d10 ACPI: DSDT (v001 0AAAA 0AAAA001 0x00000001 INTL 0x02002026) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Unknown CPU [15:5] APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 Unknown CPU [15:5] APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: IOAPIC (id[0x03] address[0xff4fe000] global_irq_base[0x18]) IOAPIC[1]: Assigned apic_id 3 IOAPIC[1]: apic_id 3, version 17, address 0xff4fe000, IRQ 24-27 ACPI: IOAPIC (id[0x04] address[0xff4ff000] global_irq_base[0x1c]) IOAPIC[2]: Assigned apic_id 4 IOAPIC[2]: apic_id 4, version 17, address 0xff4ff000, IRQ 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Using ACPI (MADT) for SMP configuration information Kernel command line: vga=0xfffe ramdisk=0 root=/dev/discs/disc0/part1 ro single Initializing CPU#0 Detected 1594.002 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 3178.49 BogoMIPS Memory: 2069536k/2097088k available (1329k kernel code, 27164k reserved, 572k data, 112k init, 1179584k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: Common caps: 078bfbff e1d3fbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: Common caps: 078bfbff e1d3fbff 00000000 00000000 CPU0: AMD Opteron(tm) Processor 242 stepping 08 per-CPU timeslice cutoff: 2924.51 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000004 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3185.04 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: Common caps: 078bfbff e1d3fbff 00000000 00000000 CPU1: AMD Opteron(tm) Processor 242 stepping 08 Total of 2 processors activated (6363.54 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 4-0, 4-1, 4-2, 4-3 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1593.9340 MHz. ..... host bus clock speed is 199.2417 MHz. cpu: 0, clocks: 1992417, slice: 664139 CPU0 cpu: 1, clocks: 1992417, slice: 664139 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle ACPI: Subsystem revision 20040326 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] ACPI: PCI Root Bridge [PCIB] (00:04) PCI: Probing PCI hardware (bus 04) ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.PBP2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) PCI: Probing PCI hardware 00:00:07[A] -> 2-16 -> IRQ 16 level low 00:00:07[B] -> 2-17 -> IRQ 17 level low 00:00:07[C] -> 2-18 -> IRQ 18 level low 00:00:07[D] -> 2-19 -> IRQ 19 level low 00:02:03[A] -> 3-0 -> IRQ 24 level low 00:02:03[B] -> 3-1 -> IRQ 25 level low 00:02:03[C] -> 3-2 -> IRQ 26 level low 00:02:03[D] -> 3-3 -> IRQ 27 level low 00:01:01[A] -> 4-0 -> IRQ 28 level low 00:01:01[B] -> 4-1 -> IRQ 29 level low 00:01:01[C] -> 4-2 -> IRQ 30 level low 00:01:01[D] -> 4-3 -> IRQ 31 level low number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 4. number of IO-APIC #4 registers: 4. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 1 0 1 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 003 03 1 1 0 1 0 1 1 A9 11 003 03 1 1 0 1 0 1 1 B1 12 003 03 1 1 0 1 0 1 1 B9 13 003 03 1 1 0 1 0 1 1 C1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00030011 ....... : max redirection entries: 0003 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 C9 01 003 03 1 1 0 1 0 1 1 D1 02 003 03 1 1 0 1 0 1 1 D9 03 003 03 1 1 0 1 0 1 1 E1 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00030011 ....... : max redirection entries: 0003 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 E9 01 003 03 1 1 0 1 0 1 1 32 02 003 03 1 1 0 1 0 1 1 3A 03 003 03 1 1 0 1 0 1 1 42 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ24 -> 1:0 IRQ25 -> 1:1 IRQ26 -> 1:2 IRQ27 -> 1:3 IRQ28 -> 2:0 IRQ29 -> 2:1 IRQ30 -> 2:2 IRQ31 -> 2:3 .................................... done. PCI: Using ACPI for IRQ routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10f Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs blk: queue f7bbfc18, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:0): 20.000MB/s transfers (20.000MHz, offset 15) (scsi0:A:1): 40.000MB/s transfers (20.000MHz, offset 15, 16bit) (scsi0:A:2): 80.000MB/s transfers (40.000MHz, offset 14, 16bit) (scsi0:A:4): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: YAMAHA Model: CRW-F1S Rev: 1.0g Type: CD-ROM ANSI SCSI revision: 02 blk: queue f7bbfa18, I/O limit 4095Mb (mask 0xffffffff) Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 blk: queue f7baf418, I/O limit 4095Mb (mask 0xffffffff) Vendor: PIONEER Model: DVD-RW DVR-107D Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 blk: queue f7bae618, I/O limit 4095Mb (mask 0xffffffff) Vendor: SEAGATE Model: ST373453LW Rev: 0003 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7baea18, I/O limit 4095Mb (mask 0xffffffff) Vendor: IOMEGA Model: ZIP 100 Rev: J.03 Type: Direct-Access ANSI SCSI revision: 02 blk: queue f7baf018, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:4:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi0, channel 0, id 4, lun 0 Attached scsi removable disk sdb at scsi0, channel 0, id 6, lun 0 SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB) Partition check: /dev/scsi/host0/bus0/target4/lun0: p1 p2 sdb: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sdb : READ CAPACITY failed. sdb : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sdb : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:10, sector 0 I/O error: dev 08:10, sector 0 unable to read partition table NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 112k freed EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal tg3.c:v3.14 (November 15, 2004) eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2b:ba:da eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 Attached scsi CD-ROM sr2 at scsi0, channel 0, id 2, lun 0 sr0: scsi3-mmc drive: 44x/44x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi-1 drive sr2: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray inserting floppy driver for 2.4.28 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Software Watchdog Timer: 0.05, timer margin: 60 sec Creative EMU10K1 PCI Audio Driver, version 0.20, 15:47:58 Nov 18 2004 emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xa800-0xa81f, IRQ 16 ac97_codec: AC97 codec, id: TRA35 (TriTech TR A5) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 1919M agpgart: Detected AMD On-CPU GART chipset agpgart: AGP aperture is 128M @ 0xf0000000 [drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon RV280 9200 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-isa.o version 2.6.3 (20020322) i2c-core.o: adapter ISA main adapter registered as adapter 0. i2c-isa.o: ISA bus access for i2c modules initialized. i2c-proc.o version 2.6.1 (20010830) mtp008.o version 2.6.3 (20020322) i2c-core.o: driver MTP008 sensor driver registered. eeprom.o version 2.6.3 (20020322) i2c-core.o: driver EEPROM READER registered. udf: registering filesystem Installing knfsd (copyright (C) 1996 okir@monad.swb.de). LVM version 1.0.8(17/11/2003) module loaded sdb: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sdb : READ CAPACITY failed. sdb : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sdb : block size assumed to be 512 bytes, disk size 1GB. sdb: Write Protect is off /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:10, sector 0 I/O error: dev 08:10, sector 0 unable to read partition table Device not ready. Make sure there is a disc in the drive. sdb: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sdb : READ CAPACITY failed. sdb : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sdb : block size assumed to be 512 bytes, disk size 1GB. sdb: Write Protect is off /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:10, sector 0 I/O error: dev 08:10, sector 0 unable to read partition table Device not ready. Make sure there is a disc in the drive. I/O error: dev 08:10, sector 0 sdb: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sdb : READ CAPACITY failed. sdb : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sdb : block size assumed to be 512 bytes, disk size 1GB. sdb: Write Protect is off /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:10, sector 0 I/O error: dev 08:10, sector 0 unable to read partition table Device not ready. Make sure there is a disc in the drive. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding Swap: 2097136k swap-space (priority 2) Adding Swap: 2097136k swap-space (priority 1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xf8b91000, IRQ 19 usb-ohci.c: usb-03:00.0, Advanced Micro Devices [AMD] AMD-8111 USB usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xf8b93000, IRQ 19 usb-ohci.c: usb-03:00.1, Advanced Micro Devices [AMD] AMD-8111 USB (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected usb-uhci.c: $Revision: 1.275 $ time 15:48:17 Nov 18 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 mice: PS/2 mouse device common for all mice hub.c: new USB device 03:00.1-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x46d/0xc501) is not claimed by any active driver. usb.c: registered new driver hiddev usb.c: registered new driver hid input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers ---------------------------------------------------------------------- 00:06.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 7460 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- Capabilities: [c0] #08 [0086] Capabilities: [f0] #08 [8000] 00:07.0 ISA bridge: Advanced Micro Devices [AMD]: Unknown device 7468 (rev 05) Subsystem: Advanced Micro Devices [AMD]: Unknown device 7468 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [a0] #07 [0083] Capabilities: [b8] #08 [8000] Capabilities: [c0] #08 [004a] 00:0a.1 PIC: Advanced Micro Devices [AMD]: Unknown device 7451 (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD]: Unknown device 36c0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [a0] #07 [0003] Capabilities: [b8] #08 [8000] 00:0b.1 PIC: Advanced Micro Devices [AMD]: Unknown device 7451 (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD]: Unknown device 36c0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 05:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5961 (rev 01) (prog-if 00 [VGA]) Subsystem: VISIONTEK: Unknown device 7c13 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR-