Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262927AbUKXXF5 (ORCPT ); Wed, 24 Nov 2004 18:05:57 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262888AbUKXXD6 (ORCPT ); Wed, 24 Nov 2004 18:03:58 -0500 Received: from mail.aknet.ru ([217.67.122.194]:35337 "EHLO mail.aknet.ru") by vger.kernel.org with ESMTP id S262927AbUKXWz4 (ORCPT ); Wed, 24 Nov 2004 17:55:56 -0500 Message-ID: <41A4CF1C.6090503@aknet.ru> Date: Wed, 24 Nov 2004 21:12:44 +0300 From: Stas Sergeev User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.6) Gecko/20040510 X-Accept-Language: ru, en-us, en MIME-Version: 1.0 To: Len Brown Cc: Andrew Morton , Linux kernel , ACPI Developers Subject: Re: Fw: ACPI bug causes cd-rom lock-ups (2.6.10-rc2) References: <41990138.7080008@aknet.ru> <1101190148.19999.394.camel@d845pe> In-Reply-To: <1101190148.19999.394.camel@d845pe> Content-Type: multipart/mixed; boundary="------------000406010207080707070904" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 25851 Lines: 566 This is a multi-part message in MIME format. --------------000406010207080707070904 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hello. Len Brown wrote: > I'm surprised that you're just seeing this now in 2.6.10. > Did 2.6.9 work correctly? Yes! > If so, can you send me the 2.6.9 dmesg? Done. > Any difference with CONFIG_PNP=n? Yes. The difference is that the problem disappears (so now I have another work- around - thanks). Attached are the dmesg of 2.6.9 with PNP and 2.6.10-rc2-mm2 without PNP, both works fine. Does this help? --------------000406010207080707070904 Content-Type: text/plain; name="dmesg-2.6.9" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.6.9" Linux version 2.6.9 (root@stas) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #20 SMP Wed Nov 3 17:55:12 MSK 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f75d0 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=/dev/hda12 lapic nmi_watchdog=2 Initializing CPU#0 CPU 0 irqstacks, hard=c0410000 soft=c040e000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1133.755 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515136k/524224k available (2040k kernel code, 8488k reserved, 862k data, 200k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2244.60 BogoMIPS (lpj=1122304) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. CPU0: Intel(R) Pentium(R) III CPU 1133MHz stepping 01 per-CPU timeslice cutoff: 731.79 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. testing NMI watchdog ... OK. Brought up 1 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfafc0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fb9a0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb9d0, dseg 0xf0000 PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver SCSI subsystem initialized PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 5 (level, low) -> IRQ 5 Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1101300603.4294966447:0): initialized Total HugeTLB memory allocated, 0 Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) ACPI: Thermal Zone [THRM] (30 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Real Time Clock Driver v1.12 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ttyS4 at I/O 0xa000 (irq = 11) is a 16C950/954 ttyS5 at I/O 0xa400 (irq = 11) is a 16C950/954 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) nbd: registered device at major 43 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 17 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: MAXTOR 6L040J2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 > hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.02 loaded. mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 21845) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 308 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: SLPB PCI0 HUB0 USB0 USB1 UAR1 UAR2 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 200k freed kjournald starting. Commit interval 5 seconds usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 0000d000 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2) PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 11, io base 0000d400 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using address 2 Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices Vendor: JetFlash Model: TS256MJF2A Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 USB Mass Storage device found at 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. SCSI device sda: 512000 512-byte hdwr sectors (262 MB) sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 EXT3 FS on hda12, internal journal Adding 530104k swap on /dev/hda5. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda14, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda13, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! NTFS driver 2.1.20 [Flags: R/W MODULE]. NTFS volume version 3.1. ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:04.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.19 NET: Registered protocol family 10 Disabled Privacy Extensions on device c0396040(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present --------------000406010207080707070904 Content-Type: text/plain; name="dmesg-rc2-mm2-nopnp" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-rc2-mm2-nopnp" Linux version 2.6.10-rc2-mm2 (root@stas) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #12 SMP Wed Nov 24 13:01:01 MSK 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f75d0 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Initializing CPU#0 Kernel command line: ro root=/dev/hda12 lapic nmi_watchdog=2 CPU 0 irqstacks, hard=c0420000 soft=c041e000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1133.748 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515204k/524224k available (2125k kernel code, 8532k reserved, 836k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2244.60 BogoMIPS (lpj=1122304) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. CPU0: Intel(R) Pentium(R) III CPU 1133MHz stepping 01 per-CPU timeslice cutoff: 731.79 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. testing NMI watchdog ... OK. Brought up 1 CPUs CPU0: domain 0: span 1 groups: 1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfafc0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. fscache: general fs caching registered CacheFS: general fs caching v0.1 registered Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1101304196.752:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (30 C) lp: driver loaded but no devices found Real Time Clock Driver v1.12 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 ACPI: PS/2 Mouse Controller [PS2M] at irq 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ttyS4: detected caps 00000700 should be 00000100 ttyS4 at I/O 0xa000 (irq = 11) is a 16C950/954 ttyS5: detected caps 00000700 should be 00000100 ttyS5 at I/O 0xa400 (irq = 11) is a 16C950/954 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ACPI: Floppy Controller [FDC0] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2 elevator: using anticipatory as default io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) nbd: registered device at major 43 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 17 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: MAXTOR 6L040J2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 > hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 Please email the following PERFCTR INIT lines to mikpe@csd.uu.se To remove this message, rebuild the driver with CONFIG_PERFCTR_INIT_TESTS=n PERFCTR INIT: vendor 0, family 6, model 11, stepping 1, clock 1133748 kHz PERFCTR INIT: NITER == 64 PERFCTR INIT: loop overhead is 222 cycles PERFCTR INIT: rdtsc cost is 34.8 cycles (2453 total) PERFCTR INIT: rdpmc cost is 35.5 cycles (2498 total) PERFCTR INIT: rdmsr (counter) cost is 90.4 cycles (6008 total) PERFCTR INIT: rdmsr (evntsel) cost is 71.7 cycles (4816 total) PERFCTR INIT: wrmsr (counter) cost is 100.7 cycles (6669 total) PERFCTR INIT: wrmsr (evntsel) cost is 96.1 cycles (6375 total) PERFCTR INIT: read cr4 cost is 1.9 cycles (346 total) PERFCTR INIT: write cr4 cost is 42.2 cycles (2928 total) PERFCTR INIT: write LVTPC cost is 50.4 cycles (3451 total) PERFCTR INIT: sync_core cost is 129.3 cycles (8500 total) perfctr: driver 2.7.6, cpu type Intel P6 at 1133748 kHz NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 16384) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 312 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: SLPB PCI0 HUB0 USB0 USB1 UAR1 UAR2 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found CacheFS: Wrong magic number on cache EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 204k freed kjournald starting. Commit interval 5 seconds ibm_acpi: ec object not found usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 0xd000 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2) PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 10, io base 0xd400 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 usb 1-1: new full speed USB device using uhci_hcd and address 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning EXT3 FS on hda12, internal journal Adding 530104k swap on /dev/hda5. Priority:-1 extents:1 Vendor: JetFlash Model: TS256MJF2A Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 usb-storage: device scan complete SCSI device sda: 512000 512-byte hdwr sectors (262 MB) sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda14, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda13, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! NTFS driver 2.1.23-WIP [Flags: R/W MODULE]. NTFS volume version 3.1. ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:04.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.19 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 10 Disabled Privacy Extensions on device c03ab8e0(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present --------------000406010207080707070904-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/