Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261436AbUK1L0W (ORCPT ); Sun, 28 Nov 2004 06:26:22 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261435AbUK1L0W (ORCPT ); Sun, 28 Nov 2004 06:26:22 -0500 Received: from wl-193.226.227-253-szolnok.dunaweb.hu ([193.226.227.253]:61865 "EHLO szolnok.dunaweb.hu") by vger.kernel.org with ESMTP id S261436AbUK1LZW (ORCPT ); Sun, 28 Nov 2004 06:25:22 -0500 Message-ID: <41A9B5D4.1090700@freemail.hu> Date: Sun, 28 Nov 2004 12:26:12 +0100 From: Zoltan Boszormenyi User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; hu; rv:1.7.3) Gecko/20041020 X-Accept-Language: hu, en-us MIME-Version: 1.0 To: Zwane Mwaikambo CC: linux-kernel@vger.kernel.org Subject: Re: CD-ROM problem on x86-64 References: <41A84875.2030505@freemail.hu> <41A848C4.1030504@freemail.hu> <41A8C3BF.20904@freemail.hu> <41A8F4C3.9070000@freemail.hu> In-Reply-To: Content-Type: multipart/mixed; boundary="------------010408020309020600070801" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19387 Lines: 413 This is a multi-part message in MIME format. --------------010408020309020600070801 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Zwane Mwaikambo ?rta: > On Sat, 27 Nov 2004, Zoltan Boszormenyi wrote: > > >>I will soon. Although I have to apply this patch also, more than one >>person use my machine at once. My 2 and a half year old son would be >>angry without his cartoons. ;-) >> >>In the meantime it turned out that downing eth1 did not solve this >>problem. The r8169 stopped spitting its messages but I still had one >> >>hda: dma_timer_expiry: dma status == 0x24 >>hda: DMA interrupt recovery >>hda: lost interrupt > > > Or you could try booting with acpi=off I did. After about 2 hours uptime, I got some of these again. Once when the machine was not too i/o stressed (playing a movie off disk and xine was reading some hundreds of KB per second) and then when I was extracting the kernel source tree. It seems the problem doesn't depend on I/O stress. Although the machine is 100MB+ into swap, it doesn make constant I/O as the HDD led shows. dmesg is attached again. Now I try to compile a 2.6.10-rc2-bk11 with the before mentioned extension and report back. Best regards, Zolt?n B?sz?rm?nyi --------------010408020309020600070801 Content-Type: text/plain; name="dmesg-FC3-acpi-off.log" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-FC3-acpi-off.log" Bootdata ok (command line is ro root=LABEL=/ dumbcon=1 rhgb acpi=off quiet) Linux version 2.6.9-1.681ruby_FC3.root (root@wl-193.226.227-37-szolnok.dunaweb.hu) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Wed Nov 24 20:26:05 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000cc000 - 00000000000d6000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) No mptable found. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: VIA <6>Product ID: K8T400 <6>APIC at: 0xFEE00000 Processor #0 15:4 APIC version 17 I/O APIC #2 Version 3 at 0xFEC00000. Processors: 1 Checking aperture... CPU 0: aperture @ d0000000 size 128 MB Built 1 zonelists Kernel command line: ro root=LABEL=/ dumbcon=1 rhgb acpi=off quiet console=tty0 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2000.138 MHz processor. Console: Colour VGA+ 80x25 vc:1-16 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 509312k/524224k available (2408k kernel code, 14156k reserved, 1292k data, 164k init) Calibrating delay loop... 3940.35 BogoMIPS (lpj=1970176) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08 Using local APIC NMI watchdog using perfctr0 Using IO-APIC 2 Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1106/3227] at 0000:00:11.0 PCI->APIC IRQ transform: (B0,I5,P0) -> 137 PCI->APIC IRQ transform: (B0,I5,P0) -> 137 PCI->APIC IRQ transform: (B0,I6,P0) -> 145 PCI->APIC IRQ transform: (B0,I8,P0) -> 153 PCI->APIC IRQ transform: (B0,I10,P0) -> 145 PCI->APIC IRQ transform: (B0,I11,P0) -> 137 PCI->APIC IRQ transform: (B0,I13,P0) -> 145 PCI->APIC IRQ transform: (B0,I14,P0) -> 153 PCI->APIC IRQ transform: (B0,I15,P1) -> 145 PCI->APIC IRQ transform: (B0,I15,P0) -> 145 PCI->APIC IRQ transform: (B0,I16,P0) -> 161 PCI->APIC IRQ transform: (B0,I16,P0) -> 161 PCI->APIC IRQ transform: (B0,I16,P1) -> 161 PCI->APIC IRQ transform: (B0,I16,P1) -> 161 PCI->APIC IRQ transform: (B0,I16,P2) -> 161 PCI->APIC IRQ transform: (B0,I17,P2) -> 169 PCI->APIC IRQ transform: (B1,I0,P0) -> 137 agpgart: Detected AGP bridge 0 agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xd0000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1101630820.170:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key A617AC2237592777 - User ID: Red Hat, Inc. (Kernel Module GPG key) PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1 PCI: Via IRQ fixup for 0000:00:11.5, from 3 to 9 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 Console: mono dummy device 80x25 vc:17-17 Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y120L0, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice keyboard.c: [AT Raw Set 2 keyboard] vc:1-16 input: AT Raw Set 2 keyboard on isa0060/serio1 keyboard.c: [AT Translated Set 2 keyboard] vc:17-17 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 28Kbytes TCP: Hash tables configured (established 32768 bind 4681) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b) powernow-k8: BIOS error - no PSB Freeing unused kernel memory: 164k freed SCSI subsystem initialized libata version 1.02 loaded. sata_via version 0.20 sata_via(0000:00:0f.0): routed to hard irq line 1 ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC400 irq 145 ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xC408 irq 145 ata1: no device found (phy stat 00000000) scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via sata_promise version 1.00 ata3: SATA max UDMA/133 cmd 0xFFFFFF0000054200 ctl 0xFFFFFF0000054238 bmdma 0x0 irq 145 ata4: SATA max UDMA/133 cmd 0xFFFFFF0000054280 ctl 0xFFFFFF00000542B8 bmdma 0x0 irq 145 ata3: no device found (phy stat 00000000) scsi2 : sata_promise ata4: no device found (phy stat 00000000) scsi3 : sata_promise kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 280 types, 16 bools security: 53 classes, 5494 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda10, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-1.681ruby_FC3.root Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 orinoco 0.13e (David Gibson , Pavel Roskin , et al) orinoco_pci 0.13e (Pavel Roskin , David Gibson & Jean Tourrilhes ) orinoco_pci: Detected Orinoco/Prism2 PCI device at 0000:00:08.0, mem:0xCFBFD000 to 0xCFBFDFFF -> 0xffffff0000056000, irq:153 Reset done..............................................................................................................................................................................................................................................................; Clear Reset............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................; pci_cor : reg = 0x0 - FFFB9D4D - FFFB9B59 divert: allocating divert_blk for eth0 eth0: Station identity 001f:0006:0001:0003 eth0: Looks like an Intersil firmware version 1.3.6 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:09:5B:91:B2:E4 eth0: Station name "Prism I" eth0: ready r8169 Gigabit Ethernet driver 1.2 loaded r8169: NAPI enabled divert: allocating divert_blk for eth1 eth1: Identified chip type is 'RTL8169s/8110s'. eth1: RTL8169 at 0xffffff0000058f00, 00:0c:76:52:dc:54, IRQ 137 via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. PCI: Setting latency timer of device 0000:00:11.5 to 64 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: irq 161, pci mem ffffff000007cd00 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 161, io base 000000000000b000 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 161, io base 000000000000b400 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 161, io base 000000000000b800 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: irq 161, io base 000000000000bc00 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci1394: $Rev: 1223 $ Ben Collins ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[153] MMIO=[cffee000-cffee7ff] Max Packet=[2048] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 3-1: new low speed USB device using address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1 usb 3-2: new low speed USB device using address 3 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00002c4af2] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2 EXT3 FS on hda10, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com usb 5-2: new full speed USB device using address 2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda2 Ending clean XFS mount for filesystem: hda2 SELinux: initialized (dev hda2, type xfs), uses xattr XFS mounting filesystem hda5 Ending clean XFS mount for filesystem: hda5 SELinux: initialized (dev hda5, type xfs), uses xattr XFS mounting filesystem hda7 Ending clean XFS mount for filesystem: hda7 SELinux: initialized (dev hda7, type xfs), uses xattr XFS mounting filesystem hda11 Ending clean XFS mount for filesystem: hda11 SELinux: initialized (dev hda11, type xfs), uses xattr XFS mounting filesystem hda6 Ending clean XFS mount for filesystem: hda6 SELinux: initialized (dev hda6, type xfs), uses xattr XFS mounting filesystem hda9 Ending clean XFS mount for filesystem: hda9 SELinux: initialized (dev hda9, type xfs), uses xattr XFS mounting filesystem hda8 Ending clean XFS mount for filesystem: hda8 SELinux: initialized (dev hda8, type xfs), uses xattr SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80452a20(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 Adding 522104k swap on /dev/hda3. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (2047 buckets, 16376 max) - 496 bytes per conntrack Linux Kernel Card Services options: [pci] [cardbus] [pm] eth0: New link status: Connected (0001) SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts i2c /dev entries driver eth0: no IPv6 routers present parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready vmmon: module license 'unspecified' taints kernel. vmmon: no version for "sys_ioctl" found: kernel tainted. /dev/vmmon: Module vmmon: registered with major=10 minor=165 /dev/vmmon: Module vmmon: initialized /dev/vmnet: open called by PID 3391 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth1: peer interface eth1 not found, will wait for it to come up bridge-eth1: attached /dev/vmnet: open called by PID 3414 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 5343 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened divert: allocating divert_blk for vmnet8 /dev/vmnet: open called by PID 5324 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened divert: allocating divert_blk for vmnet1 /dev/vmnet: open called by PID 5882 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 6097 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened [drm] Initialized radeon 1.11.0 20020828 on minor 0: [drm] Initialized radeon 1.11.0 20020828 on minor 1: vmnet8: no IPv6 routers present vmnet1: no IPv6 routers present agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts application mozilla-bin uses obsolete OSS audio interface Losing some ticks... checking if CPU frequency changed. warning: many lost ticks. Your time source seems to be instable or some driver is hogging interupts rip __do_softirq+0x41/0xa2 hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt --------------010408020309020600070801-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/