Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261433AbVACMwM (ORCPT ); Mon, 3 Jan 2005 07:52:12 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261434AbVACMwM (ORCPT ); Mon, 3 Jan 2005 07:52:12 -0500 Received: from anor.ics.muni.cz ([147.251.4.35]:58567 "EHLO anor.ics.muni.cz") by vger.kernel.org with ESMTP id S261433AbVACMwC (ORCPT ); Mon, 3 Jan 2005 07:52:02 -0500 Date: Mon, 3 Jan 2005 13:52:00 +0100 From: Jan Kasprzak To: linux-kernel@vger.kernel.org Subject: Altix hang on boot with 2.6.8+ Message-ID: <20050103125200.GK26303@fi.muni.cz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.1i X-Muni-Spam-TestIP: 147.251.48.42 X-Muni-Virus-Test: Clean Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4714 Lines: 100 Hi all, I cannot boot a 2.6.8 or 2.6.10 kernel on my SGI Altix - it hangs during boot after printing this: [...] CPU 0: base freq=200.000MHz, ITC ratio=14/2, ITC freq=1400.000MHz+/--1ppm Console: colour dummy device 80x25 (from the 2.4 boot messages it seems that tha BogoMips test should be the next line). 2.6.6 boots fine. I have also tried CONFIG_EFI_PCDP and console=hcdp. The system is 3-node (6-cpu) Altix 350 running SLES 8. Can 2.6.8+ boot on Altix 350? I may test 2.6.7 or -rc* if you want. Full boot messages are here: Linux version 2.6.8 (root@hostname) (gcc version 3.2.2) #2 SMP Mon Jan 3 13:35:16 CET 2005 EFI v1.02 by SGI: SALsystab=0x3002514a60 ACPI 2.0=0x3002514b60 ACPI: RSDP (v002 SGI ) @ 0x0000003002514b60 ACPI: XSDT (v001 SGI XSDTSN2 0x00010001 0x00000001) @ 0x00000030027a07d0 ACPI: MADT (v001 SGI APICSN2 0x00010001 0x00000001) @ 0x0000003002514ba0 ACPI: SRAT (v001 SGI SRATSN2 0x00010001 0x00000001) @ 0x00000030027a0830 ACPI: SLIT (v001 SGI SLITSN2 0x00010001 0x00000001) @ 0x0000003002514c30 ACPI: FADT (v003 SGI FACPSN2 0x00030001 0x00000001) @ 0x00000030027a09a0 ACPI: DSDT (v001 SGI DSDTSN2 0x00010001 0x00000001) @ 0x0000003002514c80 ACPI: DSDT (v001 SGI DSDTSN2 0x00010001 0x00000001) @ 0x0000000000000000 ACPI: SRAT revision 0 ACPI: SLIT localities 3x3 Number of logical nodes in system = 3 Number of memory chunks in system = 3 SAL 2.9: SGI SN2 version 4.4 SAL Platform features: ITC_Drift SAL: AP wakeup using external interrupt vector 0x12 ACPI: Local APIC address 0xc0000000fee00000 ACPI: Error parsing MADT - no IOSAPIC entries register_intr: No IOSAPIC for GSI 52 GSI 52 (level, low) -> CPU 0 (0x0000) vector 48 6 CPUs available, 6 CPUs total Registering legacy COM ports for serial console Increasing MCA rendezvous timeout from 20000 to 49000 milliseconds MCA related initialization done SGI SAL version 4.04 Virtual mem_map starts at 0xa0007ffef2138000 Built 3 zonelists Kernel command line: BOOT_IMAGE=scsi0:/vmlinuz-2.6.10 root=900 ide=nodma hwprobe=-bios ro console=ttyS0 ide_setup: ide=nodmaIDE: Prevented DMA PID hash table entries: 4096 (order 12: 65536 bytes) CPU 0: base freq=200.000MHz, ITC ratio=14/2, ITC freq=1400.000MHz+/--1ppm Console: colour dummy device 80x25 Linux version 2.6.8 (root@hostname) (gcc version 3.2.2) #2 SMP Mon Jan 3 13:35:16 CET 2005 EFI v1.02 by SGI: SALsystab=0x3002514a60 ACPI 2.0=0x3002514b60 ACPI: RSDP (v002 SGI ) @ 0x0000003002514b60 ACPI: XSDT (v001 SGI XSDTSN2 0x00010001 0x00000001) @ 0x00000030027a07d0 ACPI: MADT (v001 SGI APICSN2 0x00010001 0x00000001) @ 0x0000003002514ba0 ACPI: SRAT (v001 SGI SRATSN2 0x00010001 0x00000001) @ 0x00000030027a0830 ACPI: SLIT (v001 SGI SLITSN2 0x00010001 0x00000001) @ 0x0000003002514c30 ACPI: FADT (v003 SGI FACPSN2 0x00030001 0x00000001) @ 0x00000030027a09a0 ACPI: DSDT (v001 SGI DSDTSN2 0x00010001 0x00000001) @ 0x0000003002514c80 ACPI: DSDT (v001 SGI DSDTSN2 0x00010001 0x00000001) @ 0x0000000000000000 ACPI: SRAT revision 0 ACPI: SLIT localities 3x3 Number of logical nodes in system = 3 Number of memory chunks in system = 3 SAL 2.9: SGI SN2 version 4.4 SAL Platform features: ITC_Drift SAL: AP wakeup using external interrupt vector 0x12 ACPI: Local APIC address 0xc0000000fee00000 ACPI: Error parsing MADT - no IOSAPIC entries register_intr: No IOSAPIC for GSI 52 GSI 52 (level, low) -> CPU 0 (0x0000) vector 48 6 CPUs available, 6 CPUs total Registering legacy COM ports for serial console Increasing MCA rendezvous timeout from 20000 to 49000 milliseconds MCA related initialization done SGI SAL version 4.04 Virtual mem_map starts at 0xa0007ffef2138000 Built 3 zonelists Kernel command line: BOOT_IMAGE=scsi0:/vmlinuz-2.6.10 root=900 ide=nodma hwprobe=-bios ro console=ttyS0 ide_setup: ide=nodmaIDE: Prevented DMA PID hash table entries: 4096 (order 12: 65536 bytes) CPU 0: base freq=200.000MHz, ITC ratio=14/2, ITC freq=1400.000MHz+/--1ppm Console: colour dummy device 80x25 Thanks, -Yenya -- | Jan "Yenya" Kasprzak | | GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E | | http://www.fi.muni.cz/~kas/ Czech Linux Homepage: http://www.linux.cz/ | > Whatever the Java applications and desktop dances may lead to, Unix will < > still be pushing the packets around for a quite a while. --Rob Pike < - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/