Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261660AbVAHC5Y (ORCPT ); Fri, 7 Jan 2005 21:57:24 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261773AbVAHC5Y (ORCPT ); Fri, 7 Jan 2005 21:57:24 -0500 Received: from out010pub.verizon.net ([206.46.170.133]:40114 "EHLO out010.verizon.net") by vger.kernel.org with ESMTP id S261660AbVAHC45 (ORCPT ); Fri, 7 Jan 2005 21:56:57 -0500 From: Gene Heskett Reply-To: gene.heskett@verizon.net Organization: None, usuallly detectable by casual observers To: linux-kernel@vger.kernel.org, Ingo Molnar Subject: 2.6.10-mm1-V0.7.34-01 ACPI err in dmesg Date: Fri, 7 Jan 2005 21:56:54 -0500 User-Agent: KMail/1.7 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200501072156.54803.gene.heskett@verizon.net> X-Authentication-Info: Submitted using SMTP AUTH at out010.verizon.net from [151.205.52.185] at Fri, 7 Jan 2005 20:56:55 -0600 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13313 Lines: 305 Greetings; While I haven't had any huge glitches other than the trashing of the logs with over run messages from tvtime. logwatch keeps calling this to my attention, from /var/log/dmesg: ---------------- Linux version 2.6.10-mm1-V0.7.34-01 (root@coyote.coyote.den) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2 Thu Jan 6 19:45:17 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.2 present. __iounmap: bad address c00f0000 <-why? ACPI: RSDP (v000 Nvidia ) @ 0x000f7220 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7dc0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Real-Time Preemption Support (c) Ingo Molnar Built 1 zonelists mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 Kernel command line: ro root=/dev/hda7 vga=ask CPU 0 irqstacks, hard=c044d000 soft=c044c000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2079.835 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 132x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1035388k/1048512k available (2261k kernel code, 12740k reserved, 901k data, 188k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4120.57 BogoMIPS (lpj=2060288) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2800+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. spawn_desched_task(00000000) desched cpu_callback 3/00000000 ksoftirqd started up. softirq RT prio: 24. desched cpu_callback 2/00000000 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 desched thread 0 started up. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041210 ACPI-1138: *** Error: Method execution failed [\STRC] (Node c18ef760), AE_AML_BUFFER_LIMIT <-why? ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node c18fa1c0), AE_AML_BUFFER_LIMIT <-why? --------- logwatch in particular is mewling about these last 2. ------back to dmesg ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: nForce2 C1 Halt Disconnect fixup ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PnPBIOS: Disabled by ACPI SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. pnp: 00:00: ioport range 0x4000-0x407f could not be reserved pnp: 00:00: ioport range 0x4080-0x40ff has been reserved pnp: 00:00: ioport range 0x4400-0x447f has been reserved pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved pnp: 00:00: ioport range 0x4200-0x427f has been reserved pnp: 00:00: ioport range 0x4280-0x42ff has been reserved pnp: 00:01: ioport range 0x5000-0x503f has been reserved pnp: 00:01: ioport range 0x5100-0x513f has been reserved apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. highmem bounce pool size: 64 pages vesafb: probe of vesafb0 failed with error -6 <-why? ACPI: Thermal Zone [THRM] (55 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 ipmi message handler version v33 ipmi device interface version v33 ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <-why? ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <-why? ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <-why> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <-why? parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler cfq registered ACPI: Floppy Controller [FDC0] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2 elevator: using cfq as default io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 6Y120P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON DVDRW LDW-451S, ATAPI CD/DVD-ROM drive hdd: WDC WD2000JB-00EVA0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdd: max request size: 1024KiB hdd: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hdd: cache flushes supported hdd: hdd1 hdd2 hdd3 hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 22 (level, high) -> IRQ 22 ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.2 to 64 hm: ioapic cache empty for irq 22 (e:00000000/d:00010000) 000189b1 ehci_hcd 0000:00:02.2: irq 22, pci mem 0xdc004000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, high) -> IRQ 21 [...] See the <-why?'s appended to a few lines above, and tell me if I need to reconfigure something? A cat of /ptoc/interrupts CPU0 0: 94309177 IO-APIC-edge timer 0/4324 1: 107897 IO-APIC-edge i8042 52/7897 3: 186 IO-APIC-edge serial 8/186 4: 427140 IO-APIC-edge serial 143/27134 7: 0 IO-APIC-edge parport0 0/0 8: 609455 IO-APIC-edge rtc 0/9455 9: 0 IO-APIC-level acpi 0/0 14: 1687537 IO-APIC-edge ide0 492/87325 15: 301139 IO-APIC-edge ide1 8/1123 17: 55694 IO-APIC-level Bt87x audio, bttv0 303/55694 19: 5649406 IO-APIC-level radeon@pci:0000:02:00.0 291/49406 20: 250990 IO-APIC-level ohci_hcd 276/50990 21: 15805 IO-APIC-level ohci_hcd, NVidia nForce2 0/15805 22: 11309183 IO-APIC-level ehci_hcd, eth0 62/9183 NMI: 0 LOC: 93610687 ERR: 0 MIS: 0 What else might be illuminating here? -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.31% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attorneys please note, additions to this message by Gene Heskett are: Copyright 2004 by Maurice Eugene Heskett, all rights reserved. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/