Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263107AbVALFln (ORCPT ); Wed, 12 Jan 2005 00:41:43 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263056AbVALFlH (ORCPT ); Wed, 12 Jan 2005 00:41:07 -0500 Received: from ozlabs.org ([203.10.76.45]:3729 "EHLO ozlabs.org") by vger.kernel.org with ESMTP id S263105AbVALF3s (ORCPT ); Wed, 12 Jan 2005 00:29:48 -0500 Date: Wed, 12 Jan 2005 16:29:35 +1100 From: David Gibson To: Jeff Garzik , orinoco-devel@lists.sourceforge.net, netdev@oss.sgi.com, linux-kernel@vger.kernel.org Subject: [8/8] orinoco: PCI/PLX/TMD driver updates Message-ID: <20050112052935.GI30426@localhost.localdomain> Mail-Followup-To: Jeff Garzik , orinoco-devel@lists.sourceforge.net, netdev@oss.sgi.com, linux-kernel@vger.kernel.org References: <20050112052352.GA30426@localhost.localdomain> <20050112052434.GB30426@localhost.localdomain> <20050112052543.GC30426@localhost.localdomain> <20050112052630.GD30426@localhost.localdomain> <20050112052711.GE30426@localhost.localdomain> <20050112052741.GF30426@localhost.localdomain> <20050112052814.GG30426@localhost.localdomain> <20050112052848.GH30426@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20050112052848.GH30426@localhost.localdomain> User-Agent: Mutt/1.5.6+20040523i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17832 Lines: 680 Update the initialization code in the various PCI incarnations of the orinoco driver. This applies similar initialization and shutdown cleanups to the orinoco_pci, orinoco_plx and orinoco_tmd drivers. It also adds COR reset support to the orinoco_plx and orinoco_tmd drivers, improves PCI power management support in the orinoco_pci driver and adds a couple of extra supported cards to the ID tables. Signed-off-by: David Gibson Index: working-2.6/drivers/net/wireless/orinoco_pci.c =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco_pci.c 2005-01-12 15:47:48.215477920 +1100 +++ working-2.6/drivers/net/wireless/orinoco_pci.c 2005-01-12 16:10:57.324301280 +1100 @@ -129,6 +129,11 @@ #define HERMES_PCI_COR_OFFT (500) /* ms */ #define HERMES_PCI_COR_BUSYT (500) /* ms */ +/* Orinoco PCI specific data */ +struct orinoco_pci_card { + void __iomem *pci_ioaddr; +}; + /* * Do a soft reset of the PCI card using the Configuration Option Register * We need this to get going... @@ -164,8 +169,9 @@ mdelay(1); reg = hermes_read_regn(hw, CMD); } - /* Did we timeout ? */ - if(time_after_eq(jiffies, timeout)) { + + /* Still busy? */ + if (reg & HERMES_CMD_BUSY) { printk(KERN_ERR PFX "Busy timeout\n"); return -ETIMEDOUT; } @@ -184,6 +190,7 @@ u16 __iomem *pci_ioaddr = NULL; unsigned long pci_iolen; struct orinoco_private *priv = NULL; + struct orinoco_pci_card *card; struct net_device *dev = NULL; err = pci_enable_device(pdev); @@ -192,24 +199,31 @@ return err; } + err = pci_request_regions(pdev, DRIVER_NAME); + if (err != 0) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + /* Resource 0 is mapped to the hermes registers */ pci_iorange = pci_resource_start(pdev, 0); pci_iolen = pci_resource_len(pdev, 0); pci_ioaddr = ioremap(pci_iorange, pci_iolen); - if (! pci_iorange) { + if (!pci_iorange) { printk(KERN_ERR PFX "Cannot remap hardware registers\n"); - goto fail; + goto fail_map; } /* Allocate network device */ - dev = alloc_orinocodev(0, NULL); + dev = alloc_orinocodev(sizeof(*card), orinoco_pci_cor_reset); if (! dev) { err = -ENOMEM; - goto fail; + goto fail_alloc; } priv = netdev_priv(dev); - dev->base_addr = (unsigned long) pci_ioaddr; + card = priv->card; + card->pci_ioaddr = pci_ioaddr; dev->mem_start = pci_iorange; dev->mem_end = pci_iorange + pci_iolen - 1; SET_MODULE_OWNER(dev); @@ -226,14 +240,14 @@ if (err) { printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; - goto fail; + goto fail_irq; } dev->irq = pdev->irq; /* Perform a COR reset to start the card */ - if(orinoco_pci_cor_reset(priv) != 0) { + err = orinoco_pci_cor_reset(priv); + if (err) { printk(KERN_ERR PFX "Initial reset failed\n"); - err = -ETIMEDOUT; goto fail; } @@ -250,16 +264,19 @@ return 0; fail: - if (dev) { - if (dev->irq) - free_irq(dev->irq, dev); + free_irq(pdev->irq, dev); - free_orinocodev(dev); - } + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + iounmap(pci_ioaddr); - if (pci_ioaddr) - iounmap(pci_ioaddr); + fail_map: + pci_release_regions(pdev); + fail_resources: pci_disable_device(pdev); return err; @@ -269,18 +286,14 @@ { struct net_device *dev = pci_get_drvdata(pdev); struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pci_card *card = priv->card; unregister_netdev(dev); - - if (dev->irq) - free_irq(dev->irq, dev); - - if (priv->hw.iobase) - iounmap(priv->hw.iobase); - + free_irq(dev->irq, dev); pci_set_drvdata(pdev, NULL); free_orinocodev(dev); - + iounmap(card->pci_ioaddr); + pci_release_regions(pdev); pci_disable_device(pdev); } @@ -312,6 +325,9 @@ orinoco_unlock(priv, &flags); + pci_save_state(pdev); + pci_set_power_state(pdev, 3); + return 0; } @@ -324,6 +340,9 @@ printk(KERN_DEBUG "%s: Orinoco-PCI waking up\n", dev->name); + pci_set_power_state(pdev, 0); + pci_restore_state(pdev); + err = orinoco_reinit_firmware(dev); if (err) { printk(KERN_ERR "%s: Error %d re-initializing firmware on orinoco_pci_resume()\n", @@ -354,6 +373,8 @@ {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, /* Intersil Prism 2.5 */ {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, + /* Samsung MagicLAN SWL-2210P */ + {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,}, {0,}, }; Index: working-2.6/drivers/net/wireless/orinoco_plx.c =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco_plx.c 2005-01-12 15:47:48.216477768 +1100 +++ working-2.6/drivers/net/wireless/orinoco_plx.c 2004-11-05 14:20:30.000000000 +1100 @@ -142,26 +142,68 @@ #include "hermes.h" #include "orinoco.h" -#define COR_OFFSET (0x3e0/2) /* COR attribute offset of Prism2 PC card */ +#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */ #define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ +#define COR_RESET (0x80) /* reset bit in the COR register */ +#define PLX_RESET_TIME (500) /* milliseconds */ #define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */ #define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */ -static const u16 cis_magic[] = { - 0x0001, 0x0003, 0x0000, 0x0000, 0x00ff, 0x0017, 0x0004, 0x0067 +static const u8 cis_magic[] = { + 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67 }; +/* Orinoco PLX specific data */ +struct orinoco_plx_card { + void __iomem *attr_mem; +}; + +/* + * Do a soft reset of the card using the Configuration Option Register + */ +static int orinoco_plx_cor_reset(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + struct orinoco_plx_card *card = priv->card; + u8 __iomem *attr_mem = card->attr_mem; + unsigned long timeout; + u16 reg; + + writeb(COR_VALUE | COR_RESET, attr_mem + COR_OFFSET); + mdelay(1); + + writeb(COR_VALUE, attr_mem + COR_OFFSET); + mdelay(1); + + /* Just in case, wait more until the card is no longer busy */ + timeout = jiffies + (PLX_RESET_TIME * HZ / 1000); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Did we timeout ? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + + static int orinoco_plx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int err = 0; - u16 __iomem *attr_mem = NULL; - u32 reg, addr; + u8 __iomem *attr_mem = NULL; + u32 csr_reg, plx_addr; struct orinoco_private *priv = NULL; + struct orinoco_plx_card *card; unsigned long pccard_ioaddr = 0; unsigned long pccard_iolen = 0; - u16 magic[8]; struct net_device *dev = NULL; void __iomem *mem; int i; @@ -169,78 +211,38 @@ err = pci_enable_device(pdev); if (err) { printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return -EIO; + return err; } - /* Resource 2 is mapped to the PCMCIA space */ - attr_mem = ioremap(pci_resource_start(pdev, 2), PAGE_SIZE); - if (!attr_mem) + err = pci_request_regions(pdev, DRIVER_NAME); + if (err != 0) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); goto fail_resources; - - printk(KERN_DEBUG PFX "CIS: "); - for (i = 0; i < 16; i++) { - printk("%02X:", readw(attr_mem+i)); } - printk("\n"); - - /* Verify whether PC card is present */ - /* FIXME: we probably need to be smarted about this */ - memcpy_fromio(magic, attr_mem, 16); - if (memcmp(magic, cis_magic, 16) != 0) { - printk(KERN_ERR PFX "The CIS value of Prism2 PC " - "card is unexpected\n"); - err = -EIO; - iounmap(attr_mem); - goto fail_resources; - } - - /* PCMCIA COR is the first byte following CIS: this write should - * enable I/O mode and select level-triggered interrupts */ - writew(COR_VALUE, attr_mem + COR_OFFSET); - mdelay(1); - reg = readw(attr_mem + COR_OFFSET); - iounmap(attr_mem); - if (reg != COR_VALUE) { - printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", reg); - goto fail_resources; - } + /* Resource 1 is mapped to PLX-specific registers */ + plx_addr = pci_resource_start(pdev, 1); - /* bjoern: We need to tell the card to enable interrupts, in - case the serial eprom didn't do this already. See the - PLX9052 data book, p8-1 and 8-24 for reference. */ - addr = pci_resource_start(pdev, 1); - reg = inl(addr+PLX_INTCSR); - if (reg & PLX_INTCSR_INTEN) - printk(KERN_DEBUG PFX "Local Interrupt already enabled\n"); - else { - reg |= PLX_INTCSR_INTEN; - outl(reg, addr+PLX_INTCSR); - reg = inl(addr+PLX_INTCSR); - if(!(reg & PLX_INTCSR_INTEN)) { - printk(KERN_ERR PFX "Couldn't enable Local Interrupts\n"); - goto fail_resources; - } + /* Resource 2 is mapped to the PCMCIA attribute memory */ + attr_mem = ioremap(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + if (!attr_mem) { + printk(KERN_ERR PFX "Cannot remap PCMCIA space\n"); + goto fail_map_attr; } /* Resource 3 is mapped to the PCMCIA I/O address space */ pccard_ioaddr = pci_resource_start(pdev, 3); pccard_iolen = pci_resource_len(pdev, 3); - if (! request_region(pccard_ioaddr, pccard_iolen, DRIVER_NAME)) { - printk(KERN_ERR PFX "I/O resource 0x%lx @ 0x%lx busy\n", - pccard_iolen, pccard_ioaddr); - err = -EBUSY; - goto fail_resources; - } mem = pci_iomap(pdev, 3, 0); if (!mem) { err = -ENOMEM; - goto fail_map; + goto fail_map_io; } /* Allocate network device */ - dev = alloc_orinocodev(0, NULL); + dev = alloc_orinocodev(sizeof(*card), orinoco_plx_cor_reset); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; @@ -248,6 +250,8 @@ } priv = netdev_priv(dev); + card = priv->card; + card->attr_mem = attr_mem; dev->base_addr = pccard_ioaddr; SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); @@ -268,6 +272,43 @@ } dev->irq = pdev->irq; + /* bjoern: We need to tell the card to enable interrupts, in + case the serial eprom didn't do this already. See the + PLX9052 data book, p8-1 and 8-24 for reference. */ + csr_reg = inl(plx_addr + PLX_INTCSR); + if (!(csr_reg & PLX_INTCSR_INTEN)) { + csr_reg |= PLX_INTCSR_INTEN; + outl(csr_reg, plx_addr + PLX_INTCSR); + csr_reg = inl(plx_addr + PLX_INTCSR); + if (!(csr_reg & PLX_INTCSR_INTEN)) { + printk(KERN_ERR PFX "Cannot enable interrupts\n"); + goto fail; + } + } + + err = orinoco_plx_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + printk(KERN_DEBUG PFX "CIS: "); + for (i = 0; i < 16; i++) { + printk("%02X:", readb(attr_mem + 2*i)); + } + printk("\n"); + + /* Verify whether a supported PC card is present */ + /* FIXME: we probably need to be smarted about this */ + for (i = 0; i < sizeof(cis_magic); i++) { + if (cis_magic[i] != readb(attr_mem +2*i)) { + printk(KERN_ERR PFX "The CIS value of Prism2 PC " + "card is unexpected\n"); + err = -EIO; + goto fail; + } + } + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "Cannot register network device\n"); @@ -277,13 +318,21 @@ return 0; fail: - free_irq(dev->irq, dev); + free_irq(pdev->irq, dev); + fail_irq: + pci_set_drvdata(pdev, NULL); free_orinocodev(dev); + fail_alloc: pci_iounmap(pdev, mem); - fail_map: - release_region(pccard_ioaddr, pccard_iolen); + + fail_map_io: + iounmap(attr_mem); + + fail_map_attr: + pci_release_regions(pdev); + fail_resources: pci_disable_device(pdev); @@ -294,20 +343,18 @@ { struct net_device *dev = pci_get_drvdata(pdev); struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_plx_card *card = priv->card; + u8 __iomem *attr_mem = card->attr_mem; - unregister_netdev(dev); - - if (dev->irq) - free_irq(dev->irq, dev); + BUG_ON(! dev); - pci_iounmap(pdev, priv->hw.iobase); - + unregister_netdev(dev); + free_irq(dev->irq, dev); pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - - release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3)); - + pci_iounmap(pdev, priv->hw.iobase); + iounmap(attr_mem); + pci_release_regions(pdev); pci_disable_device(pdev); } Index: working-2.6/drivers/net/wireless/orinoco_tmd.c =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco_tmd.c 2005-01-12 15:47:48.216477768 +1100 +++ working-2.6/drivers/net/wireless/orinoco_tmd.c 2004-11-05 14:37:35.000000000 +1100 @@ -79,59 +79,89 @@ #include "orinoco.h" #define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ +#define COR_RESET (0x80) /* reset bit in the COR register */ +#define TMD_RESET_TIME (500) /* milliseconds */ + +/* Orinoco TMD specific data */ +struct orinoco_tmd_card { + u32 tmd_io; +}; + + +/* + * Do a soft reset of the card using the Configuration Option Register + */ +static int orinoco_tmd_cor_reset(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + struct orinoco_tmd_card *card = priv->card; + u32 addr = card->tmd_io; + unsigned long timeout; + u16 reg; + + outb(COR_VALUE | COR_RESET, addr); + mdelay(1); + + outb(COR_VALUE, addr); + mdelay(1); + + /* Just in case, wait more until the card is no longer busy */ + timeout = jiffies + (TMD_RESET_TIME * HZ / 1000); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Did we timeout ? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + static int orinoco_tmd_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int err = 0; - u32 reg, addr; struct orinoco_private *priv = NULL; - unsigned long pccard_ioaddr = 0; - unsigned long pccard_iolen = 0; + struct orinoco_tmd_card *card; struct net_device *dev = NULL; void __iomem *mem; err = pci_enable_device(pdev); if (err) { printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return -EIO; + return err; } - printk(KERN_DEBUG PFX "TMD setup\n"); - pccard_ioaddr = pci_resource_start(pdev, 2); - pccard_iolen = pci_resource_len(pdev, 2); - if (! request_region(pccard_ioaddr, pccard_iolen, DRIVER_NAME)) { - printk(KERN_ERR PFX "I/O resource at 0x%lx len 0x%lx busy\n", - pccard_ioaddr, pccard_iolen); - err = -EBUSY; - goto out; + err = pci_request_regions(pdev, DRIVER_NAME); + if (err != 0) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; } - addr = pci_resource_start(pdev, 1); - outb(COR_VALUE, addr); - mdelay(1); - reg = inb(addr); - if (reg != COR_VALUE) { - printk(KERN_ERR PFX "Error setting TMD COR values %x should be %x\n", reg, COR_VALUE); - err = -EIO; - goto out2; + + mem = pci_iomap(pdev, 2, 0); + if (! mem) { + err = -ENOMEM; + goto fail_iomap; } /* Allocate network device */ - dev = alloc_orinocodev(0, NULL); + dev = alloc_orinocodev(sizeof(*card), orinoco_tmd_cor_reset); if (! dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; - goto out2; - } - - mem = pci_iomap(pdev, 2, 0); - if (!mem) { - err = -ENOMEM; - goto out3; + goto fail_alloc; } priv = netdev_priv(dev); - dev->base_addr = pccard_ioaddr; + card = priv->card; + card->tmd_io = pci_resource_start(pdev, 1); + dev->base_addr = pci_resource_start(pdev, 2); SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); @@ -140,36 +170,46 @@ printk(KERN_DEBUG PFX "Detected Orinoco/Prism2 TMD device " "at %s irq:%d, io addr:0x%lx\n", pci_name(pdev), pdev->irq, - pccard_ioaddr); + dev->base_addr); err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, dev->name, dev); if (err) { printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; - goto out4; + goto fail_irq; } dev->irq = pdev->irq; + err = orinoco_tmd_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "Cannot register network device\n"); - goto out5; + goto fail; } return 0; -out5: - free_irq(dev->irq, dev); -out4: - pci_iounmap(pdev, mem); -out3: + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); free_orinocodev(dev); -out2: - release_region(pccard_ioaddr, pccard_iolen); -out: + + fail_alloc: + pci_iounmap(pdev, mem); + + fail_iomap: + pci_release_regions(pdev); + + fail_resources: pci_disable_device(pdev); - printk(KERN_DEBUG PFX "init_one(), FAIL!\n"); return err; } @@ -177,21 +217,16 @@ static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = dev->priv; - unregister_netdev(dev); - - if (dev->irq) - free_irq(dev->irq, dev); - - pci_iounmap(pdev, priv->hw.iobase); + BUG_ON(! dev); + unregister_netdev(dev); + free_irq(dev->irq, dev); pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - - release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2)); - + pci_iounmap(pdev, priv->hw.iobase); + pci_release_regions(pdev); pci_disable_device(pdev); } -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist. NOT _the_ _other_ _way_ | _around_! http://www.ozlabs.org/people/dgibson - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/