Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263108AbVALFpu (ORCPT ); Wed, 12 Jan 2005 00:45:50 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263038AbVALFdu (ORCPT ); Wed, 12 Jan 2005 00:33:50 -0500 Received: from ozlabs.org ([203.10.76.45]:1681 "EHLO ozlabs.org") by vger.kernel.org with ESMTP id S263093AbVALF3q (ORCPT ); Wed, 12 Jan 2005 00:29:46 -0500 Date: Wed, 12 Jan 2005 16:24:34 +1100 From: David Gibson To: Jeff Garzik Cc: orinoco-devel@lists.sourceforge.net, netdev@oss.sgi.com, linux-kernel@vger.kernel.org Subject: [1/8] orinoco driver updates Message-ID: <20050112052434.GB30426@localhost.localdomain> Mail-Followup-To: Jeff Garzik , orinoco-devel@lists.sourceforge.net, netdev@oss.sgi.com, linux-kernel@vger.kernel.org References: <20050112052352.GA30426@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20050112052352.GA30426@localhost.localdomain> User-Agent: Mutt/1.5.6+20040523i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18929 Lines: 586 Reformats printk()s, comments, labels and other cosmetic strings in the orinoco driver. Also moves, removes, and adds ratelimiting in some places. Behavioural changes are trivial/cosmetic only. This reduces the cosmetic/trivial differences between the current kernel version, and the CVS version of the driver; one small step towards full merge. Signed-off-by: David Gibson Index: working-2.6/drivers/net/wireless/hermes.c =================================================================== --- working-2.6.orig/drivers/net/wireless/hermes.c 2005-01-12 11:13:41.000000000 +1100 +++ working-2.6/drivers/net/wireless/hermes.c 2005-01-12 14:47:25.791170120 +1100 @@ -48,6 +48,7 @@ #include #include #include +#include #include #include "hermes.h" @@ -232,13 +233,16 @@ err = hermes_issue_cmd(hw, cmd, parm0); if (err) { if (! hermes_present(hw)) { - printk(KERN_WARNING "hermes @ %p: " - "Card removed while issuing command.\n", - hw->iobase); + if (net_ratelimit()) + printk(KERN_WARNING "hermes @ %p: " + "Card removed while issuing command " + "0x%04x.\n", hw->iobase, cmd); err = -ENODEV; } else - printk(KERN_ERR "hermes @ %p: Error %d issuing command.\n", - hw->iobase, err); + if (net_ratelimit()) + printk(KERN_ERR "hermes @ %p: " + "Error %d issuing command 0x%04x.\n", + hw->iobase, err, cmd); goto out; } @@ -251,17 +255,16 @@ } if (! hermes_present(hw)) { - printk(KERN_WARNING "hermes @ %p: " - "Card removed while waiting for command completion.\n", - hw->iobase); + printk(KERN_WARNING "hermes @ %p: Card removed " + "while waiting for command 0x%04x completion.\n", + hw->iobase, cmd); err = -ENODEV; goto out; } if (! (reg & HERMES_EV_CMD)) { - printk(KERN_ERR "hermes @ %p: " - "Timeout waiting for command completion.\n", - hw->iobase); + printk(KERN_ERR "hermes @ %p: Timeout waiting for " + "command 0x%04x completion.\n", hw->iobase, cmd); err = -ETIMEDOUT; goto out; } @@ -481,14 +484,13 @@ *length = rlength; if (rtype != rid) - printk(KERN_WARNING "hermes @ %p: " - "hermes_read_ltv(): rid (0x%04x) does not match type (0x%04x)\n", - hw->iobase, rid, rtype); + printk(KERN_WARNING "hermes @ %p: %s(): " + "rid (0x%04x) does not match type (0x%04x)\n", + hw->iobase, __FUNCTION__, rid, rtype); if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize) printk(KERN_WARNING "hermes @ %p: " "Truncating LTV record from %d to %d bytes. " - "(rid=0x%04x, len=0x%04x)\n", - hw->iobase, + "(rid=0x%04x, len=0x%04x)\n", hw->iobase, HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength); nwords = min((unsigned)rlength - 1, bufsize / 2); Index: working-2.6/drivers/net/wireless/orinoco_pci.c =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco_pci.c 2005-01-12 11:13:41.000000000 +1100 +++ working-2.6/drivers/net/wireless/orinoco_pci.c 2005-01-12 14:47:25.792169968 +1100 @@ -151,24 +151,18 @@ /* Assert the reset until the card notice */ hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK); - printk(KERN_NOTICE "Reset done"); timeout = jiffies + (HERMES_PCI_COR_ONT * HZ / 1000); while(time_before(jiffies, timeout)) { - printk("."); mdelay(1); } - printk(";\n"); //mdelay(HERMES_PCI_COR_ONT); /* Give time for the card to recover from this hard effort */ hermes_write_regn(hw, PCI_COR, 0x0000); - printk(KERN_NOTICE "Clear Reset"); timeout = jiffies + (HERMES_PCI_COR_OFFT * HZ / 1000); while(time_before(jiffies, timeout)) { - printk("."); mdelay(1); } - printk(";\n"); //mdelay(HERMES_PCI_COR_OFFT); /* The card is ready when it's no longer busy */ @@ -183,7 +177,6 @@ printk(KERN_ERR PFX "Busy timeout\n"); return -ETIMEDOUT; } - printk(KERN_NOTICE "pci_cor : reg = 0x%X - %lX - %lX\n", reg, timeout, jiffies); return 0; } @@ -202,15 +195,19 @@ struct net_device *dev = NULL; err = pci_enable_device(pdev); - if (err) - return -EIO; + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } /* Resource 0 is mapped to the hermes registers */ pci_iorange = pci_resource_start(pdev, 0); pci_iolen = pci_resource_len(pdev, 0); pci_ioaddr = ioremap(pci_iorange, pci_iolen); - if (! pci_iorange) + if (! pci_iorange) { + printk(KERN_ERR PFX "Cannot remap hardware registers\n"); goto fail; + } /* Allocate network device */ dev = alloc_orinocodev(0, NULL); @@ -226,18 +223,16 @@ SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); - printk(KERN_DEBUG PFX - "Detected Orinoco/Prism2 PCI device at %s, mem:0x%lX to 0x%lX -> 0x%p, irq:%d\n", - pci_name(pdev), dev->mem_start, dev->mem_end, pci_ioaddr, pdev->irq); - hermes_struct_init(&priv->hw, pci_ioaddr, HERMES_32BIT_REGSPACING); pci_set_drvdata(pdev, dev); + printk(KERN_DEBUG PFX "Detected device %s, mem:0x%lx-0x%lx, irq %d\n", + pci_name(pdev), dev->mem_start, dev->mem_end, pdev->irq); + err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, dev->name, dev); if (err) { - printk(KERN_ERR PFX "Error allocating IRQ %d.\n", - pdev->irq); + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; goto fail; } @@ -245,7 +240,7 @@ /* Perform a COR reset to start the card */ if(orinoco_pci_cor_reset(priv) != 0) { - printk(KERN_ERR "%s: Failed to start the card\n", dev->name); + printk(KERN_ERR PFX "Initial reset failed\n"); err = -ETIMEDOUT; goto fail; } @@ -256,7 +251,7 @@ err = register_netdev(dev); if (err) { - printk(KERN_ERR "%s: Failed to register net device\n", dev->name); + printk(KERN_ERR PFX "Failed to register net device\n"); goto fail; } Index: working-2.6/drivers/net/wireless/orinoco.h =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco.h 2005-01-12 11:13:41.000000000 +1100 +++ working-2.6/drivers/net/wireless/orinoco.h 2005-01-12 14:47:25.792169968 +1100 @@ -127,7 +127,7 @@ { spin_lock_irqsave(&priv->lock, *flags); if (priv->hw_unavailable) { - printk(KERN_DEBUG "orinoco_lock() called with hw_unavailable (dev=%p)\n", + DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n", priv->ndev); spin_unlock_irqrestore(&priv->lock, *flags); return -EBUSY; Index: working-2.6/drivers/net/wireless/orinoco_tmd.c =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco_tmd.c 2005-01-12 11:13:41.000000000 +1100 +++ working-2.6/drivers/net/wireless/orinoco_tmd.c 2005-01-12 14:47:25.793169816 +1100 @@ -92,8 +92,10 @@ void __iomem *mem; err = pci_enable_device(pdev); - if (err) + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); return -EIO; + } printk(KERN_DEBUG PFX "TMD setup\n"); pccard_ioaddr = pci_resource_start(pdev, 2); @@ -117,6 +119,7 @@ /* Allocate network device */ dev = alloc_orinocodev(0, NULL); if (! dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; goto out2; } @@ -132,26 +135,27 @@ SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); + hermes_struct_init(&priv->hw, mem, HERMES_16BIT_REGSPACING); + pci_set_drvdata(pdev, dev); + printk(KERN_DEBUG PFX "Detected Orinoco/Prism2 TMD device " "at %s irq:%d, io addr:0x%lx\n", pci_name(pdev), pdev->irq, pccard_ioaddr); - hermes_struct_init(&(priv->hw), mem, HERMES_16BIT_REGSPACING); - pci_set_drvdata(pdev, dev); - err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, dev->name, dev); if (err) { - printk(KERN_ERR PFX "Error allocating IRQ %d.\n", - pdev->irq); + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; goto out4; } dev->irq = pdev->irq; err = register_netdev(dev); - if (err) + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); goto out5; + } return 0; Index: working-2.6/drivers/net/wireless/orinoco_cs.c =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco_cs.c 2005-01-12 11:13:41.000000000 +1100 +++ working-2.6/drivers/net/wireless/orinoco_cs.c 2005-01-12 14:47:25.793169816 +1100 @@ -405,7 +405,7 @@ last_ret = pcmcia_get_next_tuple(handle, &tuple); if (last_ret == CS_NO_MORE_ITEMS) { printk(KERN_ERR PFX "GetNextTuple(): No matching " - "CIS configuration, maybe you need the " + "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); goto cs_failed; } Index: working-2.6/drivers/net/wireless/airport.c =================================================================== --- working-2.6.orig/drivers/net/wireless/airport.c 2005-01-12 11:13:41.000000000 +1100 +++ working-2.6/drivers/net/wireless/airport.c 2005-01-12 14:47:25.793169816 +1100 @@ -28,7 +28,6 @@ #include #include #include -#include #include #include @@ -194,14 +193,14 @@ hermes_t *hw; if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) { - printk(KERN_ERR PFX "wrong interrupt/addresses in OF tree\n"); + printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); return -ENODEV; } /* Allocate space for private device-specific data */ dev = alloc_orinocodev(sizeof(*card), airport_hard_reset); if (! dev) { - printk(KERN_ERR PFX "can't allocate device datas\n"); + printk(KERN_ERR PFX "Cannot allocate network device\n"); return -ENODEV; } priv = netdev_priv(dev); @@ -224,11 +223,11 @@ /* Setup interrupts & base address */ dev->irq = macio_irq(mdev, 0); phys_addr = macio_resource_start(mdev, 0); /* Physical address */ - printk(KERN_DEBUG PFX "Airport at physical address %lx\n", phys_addr); + printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); dev->base_addr = phys_addr; card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN); if (!card->vaddr) { - printk(PFX "ioremap() failed\n"); + printk(KERN_ERR PFX "ioremap() failed\n"); goto failed; } @@ -241,7 +240,7 @@ /* Reset it before we get the interrupt */ hermes_init(hw); - if (request_irq(dev->irq, orinoco_interrupt, 0, "Airport", dev)) { + if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) { printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq); goto failed; } @@ -252,7 +251,7 @@ printk(KERN_ERR PFX "register_netdev() failed\n"); goto failed; } - printk(KERN_DEBUG PFX "card registered for interface %s\n", dev->name); + printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name); card->ndev_registered = 1; return 0; failed: Index: working-2.6/drivers/net/wireless/orinoco_plx.c =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco_plx.c 2005-01-12 11:13:41.000000000 +1100 +++ working-2.6/drivers/net/wireless/orinoco_plx.c 2005-01-12 14:48:57.890168944 +1100 @@ -167,15 +167,17 @@ int i; err = pci_enable_device(pdev); - if (err) + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); return -EIO; + } /* Resource 2 is mapped to the PCMCIA space */ attr_mem = ioremap(pci_resource_start(pdev, 2), PAGE_SIZE); if (!attr_mem) - goto out; + goto fail_resources; - printk(KERN_DEBUG "orinoco_plx: CIS: "); + printk(KERN_DEBUG PFX "CIS: "); for (i = 0; i < 16; i++) { printk("%02X:", readw(attr_mem+i)); } @@ -185,10 +187,11 @@ /* FIXME: we probably need to be smarted about this */ memcpy_fromio(magic, attr_mem, 16); if (memcmp(magic, cis_magic, 16) != 0) { - printk(KERN_ERR "orinoco_plx: The CIS value of Prism2 PC card is invalid.\n"); + printk(KERN_ERR PFX "The CIS value of Prism2 PC " + "card is unexpected\n"); err = -EIO; iounmap(attr_mem); - goto out; + goto fail_resources; } /* PCMCIA COR is the first byte following CIS: this write should @@ -199,8 +202,8 @@ iounmap(attr_mem); if (reg != COR_VALUE) { - printk(KERN_ERR "orinoco_plx: Error setting COR value (reg=%x)\n", reg); - goto out; + printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", reg); + goto fail_resources; } /* bjoern: We need to tell the card to enable interrupts, in @@ -209,40 +212,39 @@ addr = pci_resource_start(pdev, 1); reg = inl(addr+PLX_INTCSR); if (reg & PLX_INTCSR_INTEN) - printk(KERN_DEBUG "orinoco_plx: " - "Local Interrupt already enabled\n"); + printk(KERN_DEBUG PFX "Local Interrupt already enabled\n"); else { reg |= PLX_INTCSR_INTEN; outl(reg, addr+PLX_INTCSR); reg = inl(addr+PLX_INTCSR); if(!(reg & PLX_INTCSR_INTEN)) { - printk(KERN_ERR "orinoco_plx: " - "Couldn't enable Local Interrupts\n"); - goto out; + printk(KERN_ERR PFX "Couldn't enable Local Interrupts\n"); + goto fail_resources; } } - /* and 3 to the PCMCIA slot I/O address space */ + /* Resource 3 is mapped to the PCMCIA I/O address space */ pccard_ioaddr = pci_resource_start(pdev, 3); pccard_iolen = pci_resource_len(pdev, 3); if (! request_region(pccard_ioaddr, pccard_iolen, DRIVER_NAME)) { - printk(KERN_ERR "orinoco_plx: I/O resource 0x%lx @ 0x%lx busy\n", + printk(KERN_ERR PFX "I/O resource 0x%lx @ 0x%lx busy\n", pccard_iolen, pccard_ioaddr); err = -EBUSY; - goto out; + goto fail_resources; } mem = pci_iomap(pdev, 3, 0); if (!mem) { err = -ENOMEM; - goto out1; + goto fail_map; } /* Allocate network device */ dev = alloc_orinocodev(0, NULL); if (!dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; - goto out2; + goto fail_alloc; } priv = netdev_priv(dev); @@ -250,39 +252,41 @@ SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); + hermes_struct_init(&priv->hw, mem, HERMES_16BIT_REGSPACING); + pci_set_drvdata(pdev, dev); + printk(KERN_DEBUG PFX "Detected Orinoco/Prism2 PLX device " "at %s irq:%d, io addr:0x%lx\n", pci_name(pdev), pdev->irq, pccard_ioaddr); - hermes_struct_init(&(priv->hw), mem, HERMES_16BIT_REGSPACING); - pci_set_drvdata(pdev, dev); - err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, dev->name, dev); if (err) { - printk(KERN_ERR PFX "Error allocating IRQ %d.\n", pdev->irq); + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; - goto out3; + goto fail_irq; } dev->irq = pdev->irq; err = register_netdev(dev); - if (err) - goto out4; + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); + goto fail; + } return 0; -out4: + fail: free_irq(dev->irq, dev); -out3: + fail_irq: free_netdev(dev); -out2: + fail_alloc: pci_iounmap(pdev, mem); -out1: + fail_map: release_region(pccard_ioaddr, pccard_iolen); -out: + fail_resources: pci_disable_device(pdev); - printk(KERN_DEBUG PFX "init_one(), FAIL!\n"); + return err; } Index: working-2.6/drivers/net/wireless/orinoco.c =================================================================== --- working-2.6.orig/drivers/net/wireless/orinoco.c 2005-01-12 11:13:41.000000000 +1100 +++ working-2.6/drivers/net/wireless/orinoco.c 2005-01-12 14:47:25.796169360 +1100 @@ -805,8 +805,9 @@ desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); if (err) { - printk(KERN_ERR "%s: Error %d writing Tx descriptor to BAP\n", - dev->name, err); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx descriptor " + "to BAP\n", dev->name, err); stats->tx_errors++; goto fail; } @@ -836,8 +837,9 @@ err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), txfid, HERMES_802_3_OFFSET); if (err) { - printk(KERN_ERR "%s: Error %d writing packet header to BAP\n", - dev->name, err); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing packet " + "header to BAP\n", dev->name, err); stats->tx_errors++; goto fail; } @@ -1297,8 +1299,8 @@ } break; default: - printk(KERN_DEBUG "%s: Unknown information frame received " - "(type %04x).\n", dev->name, type); + printk(KERN_DEBUG "%s: Unknown information frame received: " + "type 0x%04x, length %d\n", dev->name, type, len); /* We don't actually do anything about it */ break; } @@ -1307,7 +1309,7 @@ static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) { if (net_ratelimit()) - printk(KERN_WARNING "%s: Information frame lost.\n", dev->name); + printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); } /********************************************************************/ @@ -1785,7 +1787,8 @@ } if (p) - printk(KERN_WARNING "Multicast list is longer than mc_count\n"); + printk(KERN_WARNING "%s: Multicast list is " + "longer than mc_count\n", dev->name); err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES, HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN), @@ -2053,7 +2056,7 @@ le16_to_cpus(&sta_id.variant); le16_to_cpus(&sta_id.major); le16_to_cpus(&sta_id.minor); - printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", + printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", dev->name, sta_id.id, sta_id.variant, sta_id.major, sta_id.minor); @@ -3045,8 +3048,9 @@ priv->mwo_robust = 0; else { if (frq->fixed) - printk(KERN_WARNING "%s: Fixed fragmentation not \ -supported on this firmware. Using MWO robust instead.\n", dev->name); + printk(KERN_WARNING "%s: Fixed fragmentation is " + "not supported on this firmware. " + "Using MWO robust instead.\n", dev->name); priv->mwo_robust = 1; } } else { @@ -3518,7 +3522,7 @@ } /* Copy stats */ /* In theory, we should disable irqs while copying the stats - * because the rx path migh update it in the middle... + * because the rx path might update it in the middle... * Bah, who care ? - Jean II */ memcpy(&spy_stat, priv->spy_stat, sizeof(struct iw_quality) * IW_MAX_SPY); -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist. NOT _the_ _other_ _way_ | _around_! http://www.ozlabs.org/people/dgibson - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/