Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261866AbVAYIIg (ORCPT ); Tue, 25 Jan 2005 03:08:36 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261867AbVAYIIg (ORCPT ); Tue, 25 Jan 2005 03:08:36 -0500 Received: from quark.didntduck.org ([69.55.226.66]:45540 "EHLO quark.didntduck.org") by vger.kernel.org with ESMTP id S261866AbVAYII0 (ORCPT ); Tue, 25 Jan 2005 03:08:26 -0500 Message-ID: <41F5FE79.8020307@didntduck.org> Date: Tue, 25 Jan 2005 03:08:25 -0500 From: Brian Gerst User-Agent: Mozilla Thunderbird (X11/20041216) X-Accept-Language: en-us, en MIME-Version: 1.0 To: lkml Subject: nForce4 USB not working Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2076 Lines: 51 I just put in a Gigabyte GA-K8NF-9 motherboards (nforce4 chipset), and the USB ports are not working. It recoginizes the ports but no devices attached to them (mouse, external hub). These devices worked properly with my previous motherboard. This happens with both 2.6.10 vanilla and 2.6.10-1.1109_FC4 (2.6.10-rc2 based). lspci -n: 00:02.0 Class 0c03: 10de:005a (rev a2) (prog-if 10) Subsystem: 1458:5004 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5 Memory at f0104000 (32-bit, non-prefetchable) [size=4K] Capabilities: 00:02.1 Class 0c03: 10de:005b (rev a2) (prog-if 20) Subsystem: 1458:5004 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 10 Memory at f0106000 (32-bit, non-prefetchable) [size=256] Capabilities: lsusb: Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 dmesg: ehci_hcd 0000:00:02.1: EHCI Host Controller PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: irq 10, pci mem 0xf0106000 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd 0000:00:02.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 5, pci mem 0xf0104000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected I have tried booting with acpi=off and pci=noacpi with no change. Any help would be appreciated. -- Brian Gerst - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/