Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Neil Armstrong <narmstrong@baylibre.com>
To:     khilman@baylibre.com, jbrunet@baylibre.com
Cc:     Neil Armstrong <narmstrong@baylibre.com>,
        linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/6] arm64: Add initial support for Odroid-N2
Date:   Tue, 23 Apr 2019 11:14:57 +0200
Message-Id: <20190423091503.10847-1-narmstrong@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patchset adds basic support for :
- Amlogic G12B, which is very similar to G12A
- The HardKernel Odroid-N2 based on the S922X SoC

The Amlogic G12B SoC is very similar with the G12A SoC, sharing
most of the features and architecture, but with these differences :
- The first CPU cluster only has 2xCortex-A53 instead of 4
- G12B has a second cluster of 4xCortex-A73
- Both cluster can achieve 2GHz instead of 1,8GHz for G12A
- CPU Clock architecture is difference, thus needing a different
  compatible to handle this slight difference
- Supports a MIPI CSI input
- Embeds a Mali-G52 instead of a Mali-G31, but integration is the same

Actual support is done in the same way as for the GXM support, including
the G12A dtsi and redefining the CPU clusters.
Unlike GXM, the first cluster is different, thus needing to remove
the last 2 cpu nodes of the first cluster.

G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
  SYS_PLL are swapped between the clusters
- G12A has additional clocks like for CSI an other components

Dependencies :
- Patch 1, 3, 4, 5, 6 : None
- Patch 2 : Depends on Guillaume's Temperature sensor Clock patches at [4]

Changes since v1 at [3]:
- Renamed the g12b cpu clocks like g12a counterparts
- Rebased clock patches on top of Guillaume's Temperature sensor Clock patches at [4]
- Added AO-CEC-B support to N2 DTS

Changes since RFC at [1]:
- Added bindings review tags
- Moved the fclk_div3 CRITICAL flags to the gate
- Removed invalid CRITICAL flags on the cpu clocks

[1] https://lkml.kernel.org/r/20190327103308.25058-1-narmstrong@baylibre.com
[2] https://lkml.kernel.org/r/20190325145914.32391-1-narmstrong@baylibre.com
[3] https://lkml.kernel.org/r/20190404150518.30337-1-narmstrong@baylibre.com
[4] https://lkml.kernel.org/r/20190412100221.26740-1-glaroque@baylibre.com

Neil Armstrong (6):
  dt-bindings: clk: meson: add g12b periph clock controller bindings
  clk: meson: g12a: Add support for G12B CPUB clocks
  clk: meson: g12a: mark fclk_div3 as critical
  dt-bindings: arm: amlogic: add G12B bindings
  dt-bindings: arm: amlogic: add Odroid-N2 binding
  arm64: dts: meson: Add minimal support for Odroid-N2

 .../devicetree/bindings/arm/amlogic.txt       |   6 +
 .../bindings/clock/amlogic,gxbb-clkc.txt      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 185 +++++++
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi   |  82 ++++
 drivers/clk/meson/g12a.c                      | 453 ++++++++++++++++++
 drivers/clk/meson/g12a.h                      |  20 +-
 7 files changed, 747 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi

-- 
2.21.0