Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261227AbVA0Vd2 (ORCPT ); Thu, 27 Jan 2005 16:33:28 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261226AbVA0Vd2 (ORCPT ); Thu, 27 Jan 2005 16:33:28 -0500 Received: from ylpvm15-ext.prodigy.net ([207.115.57.46]:49057 "EHLO ylpvm15.prodigy.net") by vger.kernel.org with ESMTP id S261227AbVA0VaE (ORCPT ); Thu, 27 Jan 2005 16:30:04 -0500 Date: Thu, 27 Jan 2005 13:29:03 -0800 From: Tony Lindgren To: Benjamin Herrenschmidt , Pavel Machek , Arjan van de Ven , Martin Schwidefsky , Andrea Arcangeli , George Anzinger , Thomas Gleixner , john stultz , Zwane Mwaikambo , Lee Revell Cc: linux-kernel@vger.kernel.org Subject: [PATCH] Dynamic tick, version 050127-1 Message-ID: <20050127212902.GF15274@atomide.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="G4iJoqBmSsgzjUCe" Content-Disposition: inline User-Agent: Mutt/1.5.6i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23500 Lines: 773 --G4iJoqBmSsgzjUCe Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi all, Thanks for all the comments, here's an updated version of the dynamic tick patch. I've fixed couple of things: - Dyn-tick now supports local APIC timer. This allows longer sleep time inbetween ticks, over 1000 ticks compared to 54 ticks with PIT timer. It seems to stop timers on SMP too, but I've only briefly played with it on SMP. - Fixed a stupid bug where next_timer_interrupt() was called, but jiffies was not substracted from the value. This caused the sleep to be always maximum available... - CONFIG_HPET_TIMER is still not supported, but now the dyn-tick should automatically get disabled if HPET timer is detected. - Now processor _should_ stay in idle for the duration of skipped ticks, as PIT and local APIC timers are disabled. I haven't verified this though. I haven't fixes some things, such as the separation of the idle loop into it's own module, the generic part does not really do much anyting, etc. Please note that this patch alone probably does not produce any considerable power savings. More work is needed in the PM area to take advantage of the savings. Some examples of the work needed are: - There's lots of polling timers being used in Linux, such as in the keyboard driver, that keeps the ticks skipped very short. Many of these timers could be improved. - There's currently no way to specify what kind of idle to use based on the estimated length of the sleep. For example, if the system supports ACPI C3 state, it should be possible to automatically enter C3 if the skippable jiffies are long enough. I believe the current ACPI idle loop bases the promotion/demotion to the number of idle loops run in certain time, which does not work when skipping ticks. Please also note that this patch does not solve the high-resolution timers issues. This patch is intended to be a minimal patch to expose and improve PM related issues. The main difference between dyn-tick patch compared to the high-res VST patch is that dyn-tick uses the next_timer_interrupt() function, and does not require the high-res timers patch to be installed. In the long run the dyn-tick and VST patches will probably merge. But meanwhile, PM related work can be done that benefits both patches. Again, comments and testing is appreciated! If having problems, please provide output of dmesg | grep -i "time\|tick\|apic". Regards, Tony --G4iJoqBmSsgzjUCe Content-Type: text/plain; charset=us-ascii Content-Disposition: inline; filename="patch-dynamic-tick-2.6.11-rc2-050127-1" diff -Nru a/arch/i386/Kconfig b/arch/i386/Kconfig --- a/arch/i386/Kconfig 2005-01-27 13:10:04 -08:00 +++ b/arch/i386/Kconfig 2005-01-27 13:10:04 -08:00 @@ -452,6 +452,16 @@ bool "Provide RTC interrupt" depends on HPET_TIMER && RTC=y +config NO_IDLE_HZ + bool "Dynamic Tick Timer - Skip timer ticks during idle" + help + This option enables support for skipping timer ticks when the + processor is idle. During system load, timer is continuous. + This option saves power, as it allows the system to stay in + idle mode longer. Currently supported timers are ACPI PM + timer, local APIC timer, and TSC timer. HPET timer is currently + not supported. + config SMP bool "Symmetric multi-processing support" ---help--- diff -Nru a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c --- a/arch/i386/kernel/apic.c 2005-01-27 13:10:04 -08:00 +++ b/arch/i386/kernel/apic.c 2005-01-27 13:10:04 -08:00 @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -796,8 +797,12 @@ if (!smp_found_config && detect_init_APIC()) { apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); apic_phys = __pa(apic_phys); - } else + } else { apic_phys = mp_lapic_addr; +#ifdef CONFIG_NO_IDLE_HZ + dyn_tick->state |= DYN_TICK_USE_APIC; +#endif + } set_fixmap_nocache(FIX_APIC_BASE, apic_phys); printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE, @@ -910,6 +915,8 @@ #define APIC_DIVISOR 16 +static u32 apic_timer_val; + void __setup_APIC_LVTT(unsigned int clocks) { unsigned int lvtt_value, tmp_value, ver; @@ -928,7 +935,15 @@ & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | APIC_TDR_DIV_16); - apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); + apic_timer_val = clocks/APIC_DIVISOR; + +#ifdef CONFIG_NO_IDLE_HZ + /* Local APIC timer is 24-bit */ + if (apic_timer_val) + dyn_tick->max_skip = 0xffffff / apic_timer_val; +#endif + + apic_write_around(APIC_TMICT, apic_timer_val); } static void setup_APIC_timer(unsigned int clocks) @@ -1071,6 +1086,18 @@ } } +#ifdef CONFIG_NO_IDLE_HZ +void reprogram_apic_timer(unsigned int count) +{ + unsigned long flags; + + count *= apic_timer_val; + local_irq_save(flags); + apic_write_around(APIC_TMICT, count); + local_irq_restore(flags); +} +#endif + /* * the frequency of the profiling timer can be changed * by writing a multiplier value into /proc/profile. @@ -1163,6 +1190,7 @@ fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) { + unsigned long seq; int cpu = smp_processor_id(); /* @@ -1181,6 +1209,23 @@ * interrupt lock, which is the WrongThing (tm) to do. */ irq_enter(); + +#ifdef CONFIG_NO_IDLE_HZ + /* + * Check if we need to wake up PIT interrupt handler. + * Otherwise just wake up local APIC timer. + */ + do { + seq = read_seqbegin(&xtime_lock); + if (dyn_tick->state & (DYN_TICK_ENABLED | DYN_TICK_SKIPPING)) { + if (dyn_tick->skip_cpu == cpu && dyn_tick->skip > DYN_TICK_MIN_SKIP) + dyn_tick->interrupt(0, NULL, regs); + else + reprogram_apic_timer(1); + } + } while (read_seqretry(&xtime_lock, seq)); +#endif + smp_local_timer_interrupt(regs); irq_exit(); } diff -Nru a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c --- a/arch/i386/kernel/irq.c 2005-01-27 13:10:04 -08:00 +++ b/arch/i386/kernel/irq.c 2005-01-27 13:10:04 -08:00 @@ -15,6 +15,7 @@ #include #include #include +#include #ifndef CONFIG_X86_LOCAL_APIC /* @@ -100,6 +101,11 @@ } else #endif __do_IRQ(irq, regs); + +#ifdef CONFIG_NO_IDLE_HZ + if (dyn_tick->state & (DYN_TICK_ENABLED | DYN_TICK_SKIPPING) && irq != 0) + dyn_tick->interrupt(irq, NULL, regs); +#endif irq_exit(); diff -Nru a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c --- a/arch/i386/kernel/time.c 2005-01-27 13:10:04 -08:00 +++ b/arch/i386/kernel/time.c 2005-01-27 13:10:04 -08:00 @@ -46,6 +46,7 @@ #include #include #include +#include #include #include @@ -301,6 +302,55 @@ return IRQ_HANDLED; } +#ifdef CONFIG_NO_IDLE_HZ +static unsigned long long last_tick; +void reprogram_pit_tick(int jiffies_to_skip); +extern void reprogram_apic_timer(unsigned int count); +extern void replace_timer_interrupt(void * new_handler); + +#ifdef DEBUG +#define dbg_dyn_tick_irq() {if (skipped && skipped < dyn_tick->skip) \ + printk("%li/%li ", skipped, dyn_tick->skip);} +#else +#define dbg_dyn_tick_irq() {} +#endif + + + +/* + * This interrupt handler updates the time based on number of jiffies skipped + * It would be somewhat more optimized to have a customa handler in each timer + * using hardware ticks instead of nanoseconds. Note that CONFIG_NO_IDLE_HZ + * currently disables timer fallback on skipped jiffies. + */ +irqreturn_t dyn_tick_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long flags; + volatile unsigned long long now; + unsigned int skipped = 0; + write_seqlock_irqsave(&xtime_lock, flags); + now = cur_timer->get_hw_time(); + while (now - last_tick >= NS_TICK_LEN) { + last_tick += NS_TICK_LEN; + cur_timer->mark_offset(); + do_timer_interrupt(irq, NULL, regs); + skipped++; + } + if (dyn_tick->state & (DYN_TICK_ENABLED | DYN_TICK_SKIPPING)) { + dbg_dyn_tick_irq(); + dyn_tick->skip = 1; + if (cpu_has_local_apic()) + reprogram_apic_timer(dyn_tick->skip); + reprogram_pit_tick(dyn_tick->skip); + dyn_tick->state |= DYN_TICK_ENABLED; + dyn_tick->state &= ~DYN_TICK_SKIPPING; + } + write_sequnlock_irqrestore(&xtime_lock, flags); + + return IRQ_HANDLED; +} +#endif + /* not static: needed by APM */ unsigned long get_cmos_time(void) { @@ -396,6 +446,72 @@ } #endif +#ifdef CONFIG_NO_IDLE_HZ +static struct dyn_tick_timer arch_ltt; + +#if defined(CONFIG_X86_UP_APIC) || defined(CONFIG_SMP) +void disable_pit_tick(void) +{ + extern spinlock_t i8253_lock; + unsigned long flags; + spin_lock_irqsave(&i8253_lock, flags); + outb_p(0x31, PIT_MODE); /* binary, mode 1, LSB/MSB, ch 0 */ + spin_unlock_irqrestore(&i8253_lock, flags); +} +#endif + +/* + * Reprograms the next timer interrupt + * PIT timer reprogramming code taken from APM code. + * Note that PIT timer is a 16-bit timer, which allows max + * skip of only few seconds. + */ +void reprogram_pit_tick(int jiffies_to_skip) +{ + int skip; + extern spinlock_t i8253_lock; + unsigned long flags; + + skip = jiffies_to_skip * LATCH; + if (skip > 0xffff) { + skip = 0xffff; + } + + spin_lock_irqsave(&i8253_lock, flags); + outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(skip & 0xff, PIT_CH0); /* LSB */ + outb(skip >> 8, PIT_CH0); /* MSB */ + spin_unlock_irqrestore(&i8253_lock, flags); +} + +static int __init dyn_tick_late_init(void) +{ + unsigned long flags; + + if (!cur_timer->get_hw_time) + return -ENODEV; + write_seqlock_irqsave(&xtime_lock, flags); + last_tick = cur_timer->get_hw_time(); + dyn_tick->skip = 1; + if (!cpu_has_local_apic()) + dyn_tick->max_skip = 0xffff/LATCH; /* PIT timer length */ + printk(KERN_INFO "dyn-tick: Maximum ticks to skip limited to %i\n", + dyn_tick->max_skip); + write_sequnlock_irqrestore(&xtime_lock, flags); + + if (cur_timer->late_init) + cur_timer->late_init(); + dyn_tick->interrupt = dyn_tick_timer_interrupt; + replace_timer_interrupt(dyn_tick->interrupt); + + write_seqlock_irqsave(&xtime_lock, flags); + dyn_tick->state |= DYN_TICK_ENABLED; + write_sequnlock_irqrestore(&xtime_lock, flags); + + return 0; +} +#endif + void __init time_init(void) { #ifdef CONFIG_HPET_TIMER @@ -415,6 +531,16 @@ cur_timer = select_timer(); printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); + +#ifdef CONFIG_NO_IDLE_HZ + if (strncmp(cur_timer->name, "tsc", 3) == 0 || + strncmp(cur_timer->name, "pmtmr", 3) == 0) { + arch_ltt.init = dyn_tick_late_init; + dyn_tick_register(&arch_ltt); + } else + printk(KERN_INFO "dyn-tick: Cannot use timer %s\n", + cur_timer->name); +#endif time_init_hook(); } diff -Nru a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c --- a/arch/i386/kernel/timers/timer_pm.c 2005-01-27 13:10:04 -08:00 +++ b/arch/i386/kernel/timers/timer_pm.c 2005-01-27 13:10:04 -08:00 @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -168,6 +169,7 @@ monotonic_base += delta * NSEC_PER_USEC; write_sequnlock(&monotonic_lock); +#ifndef CONFIG_NO_IDLE_HZ /* convert to ticks */ delta += offset_delay; lost = delta / (USEC_PER_SEC / HZ); @@ -184,6 +186,7 @@ first_run = 0; offset_delay = 0; } +#endif } @@ -238,6 +241,25 @@ return (unsigned long) offset_delay + cyc2us(delta); } +static unsigned long long ns_time; + +static unsigned long long get_hw_time_pmtmr(void) +{ + u32 now, delta; + static unsigned int last_cycles; + now = read_pmtmr(); + delta = (now - last_cycles) & ACPI_PM_MASK; + last_cycles = now; + ns_time += cyc2us(delta) * NSEC_PER_USEC; + return ns_time; +} + +static void late_init_pmtmr(void) +{ + ns_time = monotonic_clock_pmtmr(); +} + +extern irqreturn_t pmtmr_interrupt(int irq, void *dev_id, struct pt_regs *regs); /* acpi timer_opts struct */ static struct timer_opts timer_pmtmr = { @@ -245,7 +267,9 @@ .mark_offset = mark_offset_pmtmr, .get_offset = get_offset_pmtmr, .monotonic_clock = monotonic_clock_pmtmr, + .get_hw_time = get_hw_time_pmtmr, .delay = delay_pmtmr, + .late_init = late_init_pmtmr, }; struct init_timer_opts __initdata timer_pmtmr_init = { diff -Nru a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c --- a/arch/i386/kernel/timers/timer_tsc.c 2005-01-27 13:10:04 -08:00 +++ b/arch/i386/kernel/timers/timer_tsc.c 2005-01-27 13:10:04 -08:00 @@ -112,6 +112,15 @@ return delay_at_last_interrupt + edx; } +static unsigned long get_hw_time_tsc(void) +{ + register unsigned long eax, edx; + + unsigned long long hw_time; + rdtscll(hw_time); + return cycles_2_ns(hw_time); +} + static unsigned long long monotonic_clock_tsc(void) { unsigned long long last_offset, this_offset, base; @@ -348,6 +357,7 @@ rdtsc(last_tsc_low, last_tsc_high); +#ifndef CONFIG_NO_IDLE_HZ spin_lock(&i8253_lock); outb_p(0x00, PIT_MODE); /* latch the count ASAP */ @@ -415,14 +425,18 @@ cpufreq_delayed_get(); } else lost_count = 0; +#endif + /* update the monotonic base value */ this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; monotonic_base += cycles_2_ns(this_offset - last_offset); write_sequnlock(&monotonic_lock); +#ifndef CONFIG_NO_IDLE_HZ /* calculate delay_at_last_interrupt */ count = ((LATCH-1) - count) * TICK_SIZE; delay_at_last_interrupt = (count + LATCH/2) / LATCH; +#endif /* catch corner case where tick rollover occured * between tsc and pit reads (as noted when @@ -551,6 +565,7 @@ .mark_offset = mark_offset_tsc, .get_offset = get_offset_tsc, .monotonic_clock = monotonic_clock_tsc, + .get_hw_time = get_hw_time_tsc, .delay = delay_tsc, }; diff -Nru a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c --- a/arch/i386/mach-default/setup.c 2005-01-27 13:10:04 -08:00 +++ b/arch/i386/mach-default/setup.c 2005-01-27 13:10:04 -08:00 @@ -85,6 +85,22 @@ setup_irq(0, &irq0); } +/** + * replace_timer_interrupt - allow replacing timer interrupt handler + * + * Description: + * Can be used to replace timer interrupt handler with a more optimized + * handler. Used for enabling and disabling of CONFIG_NO_IDLE_HZ. + */ +void replace_timer_interrupt(void * new_handler) +{ + unsigned long flags; + + write_seqlock_irqsave(&xtime_lock, flags); + irq0.handler = new_handler; + write_sequnlock_irqrestore(&xtime_lock, flags); +} + #ifdef CONFIG_MCA /** * mca_nmi_hook - hook into MCA specific NMI chain diff -Nru a/include/asm-i386/timer.h b/include/asm-i386/timer.h --- a/include/asm-i386/timer.h 2005-01-27 13:10:04 -08:00 +++ b/include/asm-i386/timer.h 2005-01-27 13:10:04 -08:00 @@ -1,6 +1,7 @@ #ifndef _ASMi386_TIMER_H #define _ASMi386_TIMER_H #include +#include /** * struct timer_ops - used to define a timer source @@ -21,7 +22,9 @@ void (*mark_offset)(void); unsigned long (*get_offset)(void); unsigned long long (*monotonic_clock)(void); + unsigned long long (*get_hw_time)(void); void (*delay)(unsigned long); + void (*late_init)(void); }; struct init_timer_opts { diff -Nru a/include/linux/dyn-tick-timer.h b/include/linux/dyn-tick-timer.h --- /dev/null Wed Dec 31 16:00:00 196900 +++ b/include/linux/dyn-tick-timer.h 2005-01-27 13:10:04 -08:00 @@ -0,0 +1,73 @@ +/* + * linux/include/linux/dyn-tick-timer.h + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgen and + * Tuukka Tikkanen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#define DYN_TICK_USE_APIC (1 << 2) +#define DYN_TICK_SKIPPING (1 << 1) +#define DYN_TICK_ENABLED (1 << 0) + +struct dyn_tick_state { + unsigned int state; /* Current state */ + int skip_cpu; /* Skip handling processor */ + unsigned long skip; /* Ticks to skip */ + unsigned int max_skip; /* Max number of ticks to skip */ + unsigned long irq_skip_mask; /* Do not update time from these irqs */ + irqreturn_t (*interrupt)(int, void *, struct pt_regs *); +}; + +/* REVISIT: Add functions to enable/disable dyn-tick on the fly */ +struct dyn_tick_timer { + int (*init) (void); +}; + +extern struct dyn_tick_state * dyn_tick; +extern void dyn_tick_register(struct dyn_tick_timer * new_timer); + +#define NS_TICK_LEN ((1 * 1000000000)/HZ) +#define DYN_TICK_MIN_SKIP 2 + +#if defined(CONFIG_SMP) +#define cpu_has_local_apic() 1 +#elif defined(CONFIG_X86_UP_APIC) +#define cpu_has_local_apic() (dyn_tick->state & DYN_TICK_USE_APIC) +#else +#define cpu_has_local_apic() 0 +#endif + +#ifdef CONFIG_NO_IDLE_HZ + +#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_X86_64) +#define arch_has_safe_halt() 1 +#endif + +#else + +#define arch_has_safe_halt() 0 + +#endif diff -Nru a/kernel/Makefile b/kernel/Makefile --- a/kernel/Makefile 2005-01-27 13:10:04 -08:00 +++ b/kernel/Makefile 2005-01-27 13:10:04 -08:00 @@ -26,6 +26,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_SYSFS) += ksysfs.o obj-$(CONFIG_GENERIC_HARDIRQS) += irq/ +obj-$(CONFIG_NO_IDLE_HZ) += dyn-tick-timer.o ifneq ($(CONFIG_IA64),y) # According to Alan Modra , the -fno-omit-frame-pointer is diff -Nru a/kernel/dyn-tick-timer.c b/kernel/dyn-tick-timer.c --- /dev/null Wed Dec 31 16:00:00 196900 +++ b/kernel/dyn-tick-timer.c 2005-01-27 13:10:04 -08:00 @@ -0,0 +1,140 @@ +/* + * linux/arch/i386/kernel/dyn-tick.c + * + * Beginnings of generic dynamic tick timer support + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgen and + * Tuukka Tikkanen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * TODO: + * - Add functions for enabling/disabling dyn-tick on the fly + * - Generalize to work with ARM sys_timer + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "io_ports.h" + +#define VERSION 050227-1 + +struct dyn_tick_state dyn_tick_state; +struct dyn_tick_state * dyn_tick = &dyn_tick_state; +struct dyn_tick_timer dyn_tick_timer; +struct dyn_tick_timer * dyn_tick_cfg = &dyn_tick_timer; +static void (*orig_idle) (void) = 0; +extern void disable_pit_tick(void); +extern void reprogram_pit_tick(int jiffies_to_skip); +extern void reprogram_apic_timer(unsigned int count); +extern void reprogram_pit_tick(int jiffies_to_skip); +static cpumask_t dyn_cpu_map; + +/* + * We want to have all processors idle before reprogramming the next + * timer interrupt. Note that we must maintain the state for dynamic tick, + * otherwise the idle loop could be reprogramming the timer continuously + * further into the future, and the timer interrupt would never happen. + */ +static void dyn_tick_idle(void) +{ + int cpu; + unsigned long flags; + + if (!(dyn_tick->state & DYN_TICK_ENABLED)) + goto out; + + /* Check if we are already skipping ticks and can idle other cpus */ + if (dyn_tick->state & DYN_TICK_SKIPPING) { + reprogram_apic_timer(dyn_tick->skip); + goto out; + } + + /* Check if we can start skipping ticks */ + write_seqlock_irqsave(&xtime_lock, flags); + cpu = smp_processor_id(); + cpu_set(cpu, dyn_cpu_map); + if (cpus_full(dyn_cpu_map)) { + dyn_tick->skip = next_timer_interrupt() - jiffies; + if (dyn_tick->skip > DYN_TICK_MIN_SKIP) { + if (dyn_tick->skip > dyn_tick->max_skip) + dyn_tick->skip = dyn_tick->max_skip; + if (cpu_has_local_apic()) { + disable_pit_tick(); + reprogram_apic_timer(dyn_tick->skip); + } else + reprogram_pit_tick(dyn_tick->skip); + dyn_tick->skip_cpu = cpu; + dyn_tick->state |= DYN_TICK_SKIPPING; + } + cpus_clear(dyn_cpu_map); + } + write_sequnlock_irqrestore(&xtime_lock, flags); + +out: + if (orig_idle) + orig_idle(); + else if (arch_has_safe_halt()) + safe_halt(); +} + +void __init dyn_tick_register(struct dyn_tick_timer * new_timer) +{ + dyn_tick_cfg->init = new_timer->init; + printk(KERN_INFO "dyn-tick: Registering dynamic tick timer\n"); +} + +/* + * We need to initialize dynamic tick after calibrate delay + */ +static int __init dyn_tick_init(void) +{ + int ret = 0; + + if (dyn_tick_cfg->init == NULL) + return -ENODEV; + + ret = dyn_tick_cfg->init(); + if (ret != 0) { + printk(KERN_WARNING "dyn-tick: Init failed\n"); + return -ENODEV; + } + orig_idle = pm_idle; + pm_idle = dyn_tick_idle; +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10)) + cpu_idle_wait(); +#endif + printk(KERN_INFO "dyn-tick: Timer using dynamic tick\n"); + + return ret; +} +late_initcall(dyn_tick_init); --G4iJoqBmSsgzjUCe-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/