Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Chunfeng Yun <chunfeng.yun@mediatek.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Heikki Krogerus <heikki.krogerus@linux.intel.com>
CC:     Mark Rutland <mark.rutland@arm.com>,
        Chunfeng Yun <chunfeng.yun@mediatek.com>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
        Li Jun <jun.li@nxp.com>,
        Badhri Jagan Sridharan <badhri@google.com>,
        Hans de Goede <hdegoede@redhat.com>,
        Andy Shevchenko <andy.shevchenko@gmail.com>,
        Min Guo <min.guo@mediatek.com>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-mediatek@lists.infradead.org>,
        Biju Das <biju.das@bp.renesas.com>,
        Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH v4 1/6] dt-bindings: connector: add optional properties for Type-B
Date:   Fri, 26 Apr 2019 14:47:12 +0800
Message-ID: <1556261237-13823-2-git-send-email-chunfeng.yun@mediatek.com>
In-Reply-To: <1556261237-13823-1-git-send-email-chunfeng.yun@mediatek.com>
References: <1556261237-13823-1-git-send-email-chunfeng.yun@mediatek.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add id-gpios, vbus-gpios, vbus-supply and pinctrl properties for
usb-b-connector

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4 no changes

v3 changes:
 1. add GPIO direction, and use fixed-regulator for GPIO controlled
    VBUS regulator suggested by Rob;

v2 changes:
  1. describe more clear for vbus-gpios and vbus-supply suggested by Hans
---
 .../bindings/connector/usb-connector.txt           | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
index a9a2f2fc44f2..e8f9e854fd11 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.txt
+++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
@@ -17,6 +17,20 @@ Optional properties:
 - self-powered: Set this property if the usb device that has its own power
   source.
 
+Optional properties for usb-b-connector:
+- id-gpios: an input gpio for USB ID pin.
+- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of
+  VBUS 5V.
+  see gpio/gpio.txt.
+- vbus-supply: a phandle to the regulator for USB VBUS if needed when host
+  mode or dual role mode is supported.
+  Particularly, if use an output GPIO to control a VBUS regulator, should
+  model it as a regulator.
+  see regulator/fixed-regulator.yaml
+- pinctrl-names : a pinctrl state named "default" is optional
+- pinctrl-0 : pin control group
+  see pinctrl/pinctrl-bindings.txt
+
 Optional properties for usb-c-connector:
 - power-role: should be one of "source", "sink" or "dual"(DRP) if typec
   connector has power support.
-- 
2.21.0