Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262231AbVBCFUJ (ORCPT ); Thu, 3 Feb 2005 00:20:09 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262755AbVBCFUI (ORCPT ); Thu, 3 Feb 2005 00:20:08 -0500 Received: from smtp.loomes.de ([212.40.161.2]:36538 "EHLO falcon.loomes.de") by vger.kernel.org with ESMTP id S262338AbVBCFTu (ORCPT ); Thu, 3 Feb 2005 00:19:50 -0500 Subject: Re: Linux 2.6.11-rc3 - BT848 no signal From: Markus Trippelsdorf To: Linus Torvalds Cc: Kernel Mailing List In-Reply-To: References: Content-Type: text/plain Date: Thu, 03 Feb 2005 06:19:47 +0100 Message-Id: <1107407987.2097.18.camel@lb.loomes.de> Mime-Version: 1.0 X-Mailer: Evolution 2.0.3 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2597 Lines: 69 On Wed, 2005-02-02 at 18:35 -0800, Linus Torvalds wrote: > I'd _really_ like to calm down for a final 2.6.11 now, so please note > anything really important I missed, but keep the rest pending. And give > this a good testing.. ... > Gerd Knorr: > o video/arv: remove casts > o video/w9966: remove casts > o video/zr36120: remove casts > o v4l: video-buf update > o v4l2 tuner api update > o v4l: tuner update > o v4l: add tveeprom module > o v4l: tvaudio update > o v4l: bttv IR input driver update > o v4l: bttv update > o v4l: saa7134 module > o v4l-saa7134-module fix > o add i2c adapter id for the cx88 driver My TV card (Pinnacle PCTV Studio/Rave) stopped working due to these updates. I get no signal anymore. Rebooting into an older kernel does not stop the problem immediately. I actually have to power down the machine and then boot into 2.6.11-rc2 to make my TV card functioning again. Here is the relevant dmesg part: Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17 bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 17, latency: 64, mmio: 0xefe00000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no bttv0: using tuner=33 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z Losing some ticks... checking if CPU frequency changed. tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw] tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw] tuner: microtune: companycode=4d54 part=04 rev=04 tuner: microtune MT2032 found, OK tda9885/6/7: chip found @ 0x86 ... mt2032_set_if_freq failed with -121 mt2032_set_if_freq2 failed with -121 mt2032_set_if_freq failed with -121 mt2032_set_if_freq2 failed with -121 (repeated whenever one switches channels) __ Markus - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/