Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262266AbVBCLNP (ORCPT ); Thu, 3 Feb 2005 06:13:15 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262936AbVBCLMz (ORCPT ); Thu, 3 Feb 2005 06:12:55 -0500 Received: from smtp.loomes.de ([212.40.161.2]:64485 "EHLO falcon.loomes.de") by vger.kernel.org with ESMTP id S262768AbVBCLC7 (ORCPT ); Thu, 3 Feb 2005 06:02:59 -0500 Subject: Re: Linux 2.6.11-rc3 - BT848 no signal From: Markus Trippelsdorf To: Gerd Knorr Cc: mathieu.okuyama@free.fr, Linus Torvalds , Kernel Mailing List In-Reply-To: <87is5a0wxm.fsf@bytesex.org> References: <1107407987.2097.18.camel@lb.loomes.de> <87is5a0wxm.fsf@bytesex.org> Content-Type: multipart/mixed; boundary="=-gbU7/3XZzAy7qQkGoygE" Date: Thu, 03 Feb 2005 12:02:51 +0100 Message-Id: <1107428571.2068.4.camel@lb.loomes.de> Mime-Version: 1.0 X-Mailer: Evolution 2.0.3 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31770 Lines: 810 --=-gbU7/3XZzAy7qQkGoygE Content-Type: text/plain Content-Transfer-Encoding: 7bit On Thu, 2005-02-03 at 11:17 +0100, Gerd Knorr wrote: > > tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw] > > tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw] > > tuner: microtune: companycode=4d54 part=04 rev=04 > > tuner: microtune MT2032 found, OK > > tda9885/6/7: chip found @ 0x86 > > ... > > mt2032_set_if_freq failed with -121 > > Can you please load tuner.o with debug=1, tda9887.o with debug=2 and > mail me the logs for driver load + attempt to tune some station for > both working and non-working kernel please? OK here you go. Regards. __ Markus --=-gbU7/3XZzAy7qQkGoygE Content-Disposition: attachment; filename=log_not_working Content-Type: text/plain; name=log_not_working; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit PrefPort:A RlmtMode:Check Link State Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17 bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 17, latency: 64, mmio: 0xefe00000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no bttv0: using tuner=33 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z Losing some ticks... checking if CPU frequency changed. tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw] tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw] tuner: MT2032 hexdump: 1a 44 ff 0f 1f d7 e4 8c c3 4e ec 8f 07 32 28 22 ff 4d 54 04 04 tuner: microtune: companycode=4d54 part=04 rev=04 mt2032: xogc = 0x07 mt2032: xok = 0x00 mt2032: xogc = 0x06 mt2032: xogc = 0x06 mt2032: xok = 0x00 mt2032: xogc = 0x05 mt2032: xogc = 0x05 mt2032: xok = 0x00 mt2032: xogc = 0x04 mt2032: xogc = 0x04 mt2032: xok = 0x00 mt2032: xogc = 0x03 tuner: microtune MT2032 found, OK tda9885/6/7: chip found @ 0x86 tda9885/6/7: Oops: no tvnorm entry found tda9885/6/7: writing: b=0xc0 c=0x10 e=0x00 tda9885/6/7: write: byte B 0xc0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : AM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x10 C0-4 top adjustment : 0 dB C5-6 de-emphasis : no C7 audio gain : 0 tda9885/6/7: write: byte E 0x00 E0-1 sound carrier : 4.5 MHz E6 l pll ganting : 13 E2-4 video if : 58.75 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: Oops: no tvnorm entry found tda9885/6/7: writing: b=0xc0 c=0x10 e=0x00 tda9885/6/7: write: byte B 0xc0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : AM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x10 C0-4 top adjustment : 0 dB C5-6 de-emphasis : no C7 audio gain : 0 tda9885/6/7: write: byte E 0x00 E0-1 sound carrier : 4.5 MHz E6 l pll ganting : 13 E2-4 video if : 58.75 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y160P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: DVD SOHD-167T Rev: 9S16 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: irq 21, pci mem 0xfbd00000 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: irq 21, io base 0xc400 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: irq 21, io base 0xc800 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: irq 21, io base 0xd000 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:00:10.3: irq 21, io base 0xd400 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 w83627hf 1-0290: Reading VID from GPIO5 Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.5 to 64 ALSA device list: #0: VIA 8237 with ALC850 at 0xd800, irq 22 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV) powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6 (1400 mV) cpu_init done, current fid 0xc, vid 0x4 powernow-k8: ph2 null fid transition 0xc XFS mounting filesystem hda1 Ending clean XFS mount for filesystem: hda1 VFS: Mounted root (xfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 148k freed Adding 524280k swap on /usr/swapfile. Priority:-1 extents:1 eth0: network connection down eth0: network connection up using port A speed: 10 autonegotiation: yes duplex mode: half flowctrl: none irq moderation: disabled scatter-gather: enabled agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0x10 c=0x70 e=0x09 tda9885/6/7: write: byte B 0x10 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : low B7 output port 2 : low tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0x10 c=0x70 e=0x09 tda9885/6/7: write: byte B 0x10 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : low B7 output port 2 : low tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0x10 c=0x70 e=0x09 tda9885/6/7: write: byte B 0x10 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : low B7 output port 2 : low tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0x10 c=0x70 e=0x09 tda9885/6/7: write: byte B 0x10 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : low B7 output port 2 : low tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0x10 c=0x70 e=0x09 tda9885/6/7: write: byte B 0x10 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : low B7 output port 2 : low tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0x10 c=0x70 e=0x09 tda9885/6/7: write: byte B 0x10 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : low B7 output port 2 : low tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tuner: tv freq set to 251.93 mt2032_set_if_freq rfin=251937500 if1=1090000000 if2=38900000 from=32900000 to=39900000 mt2032: rfin=251937500 lo1=256 lo1n=32 lo1a=0 sel=4, lo1freq=1344000000 mt2032: rfin=251937500 lo2=200 lo2n=25 lo2a=0 num=2276 lo2freq=1053161000 spurcheck f1=1344000 f2=1053162 from=32900 to=39900 spurtest n1=1 n2=-2 ftest=-762324 spurtest n1=1 n2=-3 ftest=-1815486 spurtest n1=1 n2=-4 ftest=-2868648 spurtest n1=1 n2=-5 ftest=-3921810 spurtest n1=2 n2=-3 ftest=-471486 spurtest n1=2 n2=-4 ftest=-1524648 spurtest n1=2 n2=-5 ftest=-2577810 spurtest n1=3 n2=-4 ftest=-180648 spurtest n1=3 n2=-5 ftest=-1233810 spurtest n1=4 n2=-5 ftest=110190 mt2032_set_if_freq failed with -121 mt2032 Reg.E=0x0e mt2032 Reg.F=0x0f mt2032_set_if_freq2 failed with -121 tuner: tv freq set to 160.93 mt2032_set_if_freq rfin=160937500 if1=1090000000 if2=38900000 from=32900000 to=39900000 mt2032: rfin=160937500 lo1=238 lo1n=29 lo1a=6 sel=4, lo1freq=1249500000 mt2032: rfin=160937500 lo2=199 lo2n=24 lo2a=7 num=3536 lo2freq=1049661000 spurcheck f1=1249500 f2=1049662 from=32900 to=39900 spurtest n1=1 n2=-2 ftest=-849824 spurtest n1=1 n2=-3 ftest=-1899486 spurtest n1=1 n2=-4 ftest=-2949148 spurtest n1=1 n2=-5 ftest=-3998810 spurtest n1=2 n2=-3 ftest=-649986 spurtest n1=2 n2=-4 ftest=-1699648 spurtest n1=2 n2=-5 ftest=-2749310 spurtest n1=3 n2=-4 ftest=-450148 spurtest n1=3 n2=-5 ftest=-1499810 spurtest n1=4 n2=-5 ftest=-250310 mt2032_set_if_freq failed with -121 mt2032 Reg.E=0x0e mt2032 Reg.F=0x0f mt2032_set_if_freq2 failed with -121 tuner: tv freq set to 209.87 mt2032_set_if_freq rfin=209875000 if1=1090000000 if2=38900000 from=32900000 to=39900000 mt2032: rfin=209875000 lo1=248 lo1n=31 lo1a=0 sel=4, lo1freq=1302000000 mt2032: rfin=209875000 lo2=200 lo2n=25 lo2a=0 num=2322 lo2freq=1053225000 spurcheck f1=1302000 f2=1053225 from=32900 to=39900 spurtest n1=1 n2=-2 ftest=-804450 spurtest n1=1 n2=-3 ftest=-1857675 spurtest n1=1 n2=-4 ftest=-2910900 spurtest n1=1 n2=-5 ftest=-3964125 spurtest n1=2 n2=-3 ftest=-555675 spurtest n1=2 n2=-4 ftest=-1608900 spurtest n1=2 n2=-5 ftest=-2662125 spurtest n1=3 n2=-4 ftest=-306900 spurtest n1=3 n2=-5 ftest=-1360125 spurtest n1=4 n2=-5 ftest=-58125 mt2032_set_if_freq failed with -121 mt2032 Reg.E=0x0e mt2032 Reg.F=0x0f mt2032_set_if_freq2 failed with -121 tuner: tv freq set to 160.93 mt2032_set_if_freq rfin=160937500 if1=1090000000 if2=38900000 from=32900000 to=39900000 mt2032: rfin=160937500 lo1=238 lo1n=29 lo1a=6 sel=4, lo1freq=1249500000 mt2032: rfin=160937500 lo2=199 lo2n=24 lo2a=7 num=3536 lo2freq=1049661000 spurcheck f1=1249500 f2=1049662 from=32900 to=39900 spurtest n1=1 n2=-2 ftest=-849824 spurtest n1=1 n2=-3 ftest=-1899486 spurtest n1=1 n2=-4 ftest=-2949148 spurtest n1=1 n2=-5 ftest=-3998810 spurtest n1=2 n2=-3 ftest=-649986 spurtest n1=2 n2=-4 ftest=-1699648 spurtest n1=2 n2=-5 ftest=-2749310 spurtest n1=3 n2=-4 ftest=-450148 spurtest n1=3 n2=-5 ftest=-1499810 spurtest n1=4 n2=-5 ftest=-250310 mt2032_set_if_freq failed with -121 mt2032 Reg.E=0x0e mt2032 Reg.F=0x0f mt2032_set_if_freq2 failed with -121 --=-gbU7/3XZzAy7qQkGoygE Content-Disposition: attachment; filename=log_working_ Content-Type: text/plain; name=log_working_; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit 6>devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS with large block/inode numbers, no debug enabled ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=290.00 Mhz, System=230.00 MHz radeonfb: PLL min 20000 max 35000 radeonfb: Monitor 1 type CRT found radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 128x48 radeonfb: ATI Radeon QW DDR SGRAM 64 MB ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] lp: driver loaded but no devices found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xe8000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 serio: i8042 KBD port at 0x60,0x64 irq 1 parport0: PC-style at 0x3bc [PCSPP(,...)] lp0: using parport0 (polling). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17 bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 17, latency: 64, mmio: 0xefe00000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no bttv0: using tuner=33 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z Losing some ticks... checking if CPU frequency changed. tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw] tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw] tuner: MT2032 hexdump: 1a 44 20 0f 1f d7 14 05 c3 4e ec 8f 07 43 00 77 ff 4d 54 04 04 tuner: microtune: companycode=4d54 part=04 rev=04 mt2032: xogc = 0x07 mt2032: xok = 0x00 mt2032: xogc = 0x06 mt2032: xogc = 0x06 mt2032: xok = 0x00 mt2032: xogc = 0x05 mt2032: xogc = 0x05 mt2032: xok = 0x00 mt2032: xogc = 0x04 mt2032: xogc = 0x04 mt2032: xok = 0x00 mt2032: xogc = 0x03 tuner: microtune MT2032 found, OK tda9885/6/7: chip found @ 0x86 tda9885/6/7: Oops: no tvnorm entry found tda9885/6/7: writing: b=0xc0 c=0x10 e=0x00 tda9885/6/7: write: byte B 0xc0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : AM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x10 C0-4 top adjustment : 0 dB C5-6 de-emphasis : no C7 audio gain : 0 tda9885/6/7: write: byte E 0x00 E0-1 sound carrier : 4.5 MHz E6 l pll ganting : 13 E2-4 video if : 58.75 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y160P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: DVD SOHD-167T Rev: 9S16 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: irq 21, pci mem 0xfbd00000 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: irq 21, io base 0xc400 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: irq 21, io base 0xc800 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: irq 21, io base 0xd000 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:00:10.3: irq 21, io base 0xd400 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 w83627hf 1-0290: Reading VID from GPIO5 Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.5 to 64 ALSA device list: #0: VIA 8237 with ALC850 at 0xd800, irq 22 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV) powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6 (1400 mV) cpu_init done, current fid 0xc, vid 0x4 powernow-k8: ph2 null fid transition 0xc XFS mounting filesystem hda1 Ending clean XFS mount for filesystem: hda1 VFS: Mounted root (xfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 148k freed Adding 524280k swap on /usr/swapfile. Priority:-1 extents:1 eth0: network connection down eth0: network connection up using port A speed: 10 autonegotiation: yes duplex mode: half flowctrl: none irq moderation: disabled scatter-gather: enabled agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd0 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd0 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd0 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd0 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd0 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd0 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tuner: tv freq set to 160.93 mt2032_set_if_freq rfin=160937500 if1=1090000000 if2=38900000 from=32900000 to=39900000 mt2032: rfin=160937500 lo1=238 lo1n=29 lo1a=6 sel=4, lo1freq=1249500000 mt2032: rfin=160937500 lo2=199 lo2n=24 lo2a=7 num=3536 lo2freq=1049661000 spurcheck f1=1249500 f2=1049662 from=32900 to=39900 spurtest n1=1 n2=-2 ftest=-849824 spurtest n1=1 n2=-3 ftest=-1899486 spurtest n1=1 n2=-4 ftest=-2949148 spurtest n1=1 n2=-5 ftest=-3998810 spurtest n1=2 n2=-3 ftest=-649986 spurtest n1=2 n2=-4 ftest=-1699648 spurtest n1=2 n2=-5 ftest=-2749310 spurtest n1=3 n2=-4 ftest=-450148 spurtest n1=3 n2=-5 ftest=-1499810 spurtest n1=4 n2=-5 ftest=-250310 mt2032 Reg.E=0x2e mt2032 Reg.F=0x00 tuner: tv freq set to 209.87 mt2032_set_if_freq rfin=209875000 if1=1090000000 if2=38900000 from=32900000 to=39900000 mt2032: rfin=209875000 lo1=248 lo1n=31 lo1a=0 sel=4, lo1freq=1302000000 mt2032: rfin=209875000 lo2=200 lo2n=25 lo2a=0 num=2322 lo2freq=1053225000 spurcheck f1=1302000 f2=1053225 from=32900 to=39900 spurtest n1=1 n2=-2 ftest=-804450 spurtest n1=1 n2=-3 ftest=-1857675 spurtest n1=1 n2=-4 ftest=-2910900 spurtest n1=1 n2=-5 ftest=-3964125 spurtest n1=2 n2=-3 ftest=-555675 spurtest n1=2 n2=-4 ftest=-1608900 spurtest n1=2 n2=-5 ftest=-2662125 spurtest n1=3 n2=-4 ftest=-306900 spurtest n1=3 n2=-5 ftest=-1360125 spurtest n1=4 n2=-5 ftest=-58125 mt2032 Reg.E=0x3e mt2032 Reg.F=0x00 tuner: tv freq set to 327.00 mt2032_set_if_freq rfin=327000000 if1=1090000000 if2=38900000 from=32900000 to=39900000 mt2032: rfin=327000000 lo1=270 lo1n=33 lo1a=6 sel=3, lo1freq=1417500000 mt2032: rfin=327000000 lo2=200 lo2n=25 lo2a=0 num=1152 lo2freq=1051600000 spurcheck f1=1417500 f2=1051600 from=32900 to=39900 spurtest n1=1 n2=-2 ftest=-685700 spurtest n1=1 n2=-3 ftest=-1737300 spurtest n1=1 n2=-4 ftest=-2788900 spurtest n1=1 n2=-5 ftest=-3840500 spurtest n1=2 n2=-3 ftest=-319800 spurtest n1=2 n2=-4 ftest=-1371400 spurtest n1=2 n2=-5 ftest=-2423000 spurtest n1=3 n2=-4 ftest=46100 spurtest n1=3 n2=-5 ftest=-1005500 spurtest n1=4 n2=-5 ftest=412000 mt2032 Reg.E=0x2e mt2032 Reg.F=0x00 --=-gbU7/3XZzAy7qQkGoygE-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/