Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261635AbVBTBit (ORCPT ); Sat, 19 Feb 2005 20:38:49 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261784AbVBTBid (ORCPT ); Sat, 19 Feb 2005 20:38:33 -0500 Received: from ms-smtp-03.nyroc.rr.com ([24.24.2.57]:48364 "EHLO ms-smtp-03.nyroc.rr.com") by vger.kernel.org with ESMTP id S261627AbVBTBgX (ORCPT ); Sat, 19 Feb 2005 20:36:23 -0500 Subject: Re: IBM Thinkpad G41 PCMCIA problems [Was: Yenta TI: ... no PCI interrupts. Fish. Please report.] From: Steven Rostedt To: Linus Torvalds Cc: LKML , Greg KH In-Reply-To: References: <1108858971.8413.147.camel@localhost.localdomain> Content-Type: multipart/mixed; boundary="=-pfOtsUIOu75Wr0258udu" Organization: Kihon Technologies Date: Sat, 19 Feb 2005 20:36:12 -0500 Message-Id: <1108863372.8413.158.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.0.3 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33166 Lines: 1173 --=-pfOtsUIOu75Wr0258udu Content-Type: text/plain Content-Transfer-Encoding: 7bit On Sat, 2005-02-19 at 16:59 -0800, Linus Torvalds wrote: > The parent bridge has IO port mappings at 00003000-00006fff, and IO memory > mappings at c2000000-cfffffff and f0000000-f7ffffff. The cardbus stuff > _should_ all be behind those regions, but instead they are at 3fefb000 and > 40000000-40fff000 (memory-mapped) and 00004000-00004cff (IO mapped). > Damn, I should have noticed that too, but I was so convinced that the PCMCIA was broken (since that's usually what is) that I didn't look elsewhere. > So something is seriously broken. > > That's a PCI layer brokenness, btw, not a PCMCIA brokenness. > > Can you enable debugging in arch/i386/pci/pci.h and post the whole bootup > dmesg. Also, can you show what /proc/iomem looks like, and what > ls -R /sys/devices/pci* > Here's the scoop: cat /proc/iomem: 00000000-0009efff : System RAM 0009f000-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cfbff : Video ROM 000d0000-000d17ff : Adapter ROM 000d1800-000d27ff : Adapter ROM 000e0000-000effff : Extension ROM 000f0000-000fffff : System ROM 00100000-0f6effff : System RAM 00100000-00300976 : Kernel code 00300977-003d72ff : Kernel data 0f6f0000-0f6fffff : reserved 0f700000-3feeffff : System RAM 3fef0000-3fef7fff : ACPI Tables 3fef8000-3fef9fff : ACPI Non-volatile Storage 3fefa000-3fefa3ff : 0000:00:1f.1 3fefb000-3fefbfff : 0000:02:01.0 3fefb000-3fefbfff : yenta_socket 3fefc000-3fefcfff : 0000:02:01.1 3fefc000-3fefcfff : yenta_socket 3ff00000-3fffffff : reserved 40000000-403fffff : PCI CardBus #03 40400000-407fffff : PCI CardBus #03 40800000-40bfffff : PCI CardBus #07 40c00000-40ffffff : PCI CardBus #07 c0000000-c00003ff : 0000:00:1d.7 c0000000-c00003ff : ehci_hcd c0000800-c00008ff : 0000:00:1f.5 c0000800-c00008ff : Intel 82801DB-ICH4 c0000c00-c0000dff : 0000:00:1f.5 c0000c00-c0000dff : Intel 82801DB-ICH4 c1000000-c1ffffff : PCI Bus #01 c1000000-c1ffffff : 0000:01:00.0 c1000000-c1ffffff : nvidia c2000000-c200ffff : 0000:02:00.0 c2000000-c200ffff : tg3 c2010000-c201ffff : 0000:02:02.0 c2010000-c201ffff : ath d0000000-dfffffff : 0000:00:00.0 e0000000-efffffff : PCI Bus #01 e0000000-efffffff : 0000:01:00.0 e0000000-e7ffffff : vesafb fec00000-fec0ffff : reserved fee00000-fee00fff : reserved ff800000-ffffffff : reserved ============================================================ cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03bc-03be : parport0 03c0-03df : vesafb 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 1000-107f : 0000:00:1f.0 1000-107f : motherboard 1000-1003 : PM1a_EVT_BLK 1004-1005 : PM1a_CNT_BLK 1008-100b : PM_TMR 1010-1015 : ACPI CPU throttle 1020-1020 : PM2_CNT_BLK 1028-102f : GPE0_BLK 1180-11bf : 0000:00:1f.0 1180-11bf : motherboard 1800-181f : 0000:00:1d.0 1800-181f : uhci_hcd 1820-183f : 0000:00:1d.1 1820-183f : uhci_hcd 1840-185f : 0000:00:1d.2 1840-185f : uhci_hcd 1860-186f : 0000:00:1f.1 1880-189f : 0000:00:1f.3 1880-188f : i801-smbus 18c0-18ff : 0000:00:1f.5 18c0-18ff : Intel 82801DB-ICH4 1c00-1cff : 0000:00:1f.5 1c00-1cff : Intel 82801DB-ICH4 2000-207f : 0000:00:1f.6 2000-207f : Intel 82801DB-ICH4 Modem 2400-24ff : 0000:00:1f.6 2400-24ff : Intel 82801DB-ICH4 Modem 4000-40ff : PCI CardBus #03 4400-44ff : PCI CardBus #03 4800-48ff : PCI CardBus #07 4c00-4cff : PCI CardBus #07 ======================================================= ls -R /sys/devices/pci* /sys/devices/pci0000:00/: 0000:00:00.0 0000:00:00.1 0000:00:00.3 0000:00:01.0 0000:00:1d.0 0000:00:1d.1 0000:00:1d.2 0000:00:1d.7 0000:00:1e.0 0000:00:1f.0 0000:00:1f.1 0000:00:1f.3 0000:00:1f.5 0000:00:1f.6 detach_state power /sys/devices/pci0000:00/0000:00:00.0: class config detach_state device driver irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:00.0/power: state /sys/devices/pci0000:00/0000:00:00.1: class config detach_state device irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:00.1/power: state /sys/devices/pci0000:00/0000:00:00.3: class config detach_state device irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:00.3/power: state /sys/devices/pci0000:00/0000:00:01.0: 0000:01:00.0 class config detach_state device irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0: class config detach_state device driver irq local_cpus power resource rom subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/power: state /sys/devices/pci0000:00/0000:00:01.0/power: state /sys/devices/pci0000:00/0000:00:1d.0: class config detach_state device driver irq local_cpus pools power resource subsystem_device subsystem_vendor usb1 vendor /sys/devices/pci0000:00/0000:00:1d.0/power: state /sys/devices/pci0000:00/0000:00:1d.0/usb1: 1-0:1.0 1-2 bcdDevice bConfigurationValue bDeviceClass bDeviceProtocol bDeviceSubClass bmAttributes bMaxPower bNumConfigurations bNumInterfaces configuration detach_state devnum driver idProduct idVendor manufacturer maxchild power product serial speed version /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0: bAlternateSetting bInterfaceClass bInterfaceNumber bInterfaceProtocol bInterfaceSubClass bNumEndpoints detach_state driver power /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0/power: state /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2: 1-2:1.0 bcdDevice bConfigurationValue bDeviceClass bDeviceProtocol bDeviceSubClass bmAttributes bMaxPower bNumConfigurations bNumInterfaces configuration detach_state devnum driver idProduct idVendor manufacturer maxchild power product serial speed version /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0: bAlternateSetting bInterfaceClass bInterfaceNumber bInterfaceProtocol bInterfaceSubClass bNumEndpoints detach_state driver power ttyUSB0 /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/power: state /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/ttyUSB0: detach_state driver power /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/ttyUSB0/power: state /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/power: state /sys/devices/pci0000:00/0000:00:1d.0/usb1/power: state /sys/devices/pci0000:00/0000:00:1d.1: class config detach_state device driver irq local_cpus pools power resource subsystem_device subsystem_vendor usb2 vendor /sys/devices/pci0000:00/0000:00:1d.1/power: state /sys/devices/pci0000:00/0000:00:1d.1/usb2: 2-0:1.0 bcdDevice bConfigurationValue bDeviceClass bDeviceProtocol bDeviceSubClass bmAttributes bMaxPower bNumConfigurations bNumInterfaces configuration detach_state devnum driver idProduct idVendor manufacturer maxchild power product serial speed version /sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0: bAlternateSetting bInterfaceClass bInterfaceNumber bInterfaceProtocol bInterfaceSubClass bNumEndpoints detach_state driver power /sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0/power: state /sys/devices/pci0000:00/0000:00:1d.1/usb2/power: state /sys/devices/pci0000:00/0000:00:1d.2: class config detach_state device driver irq local_cpus pools power resource subsystem_device subsystem_vendor usb3 vendor /sys/devices/pci0000:00/0000:00:1d.2/power: state /sys/devices/pci0000:00/0000:00:1d.2/usb3: 3-0:1.0 bcdDevice bConfigurationValue bDeviceClass bDeviceProtocol bDeviceSubClass bmAttributes bMaxPower bNumConfigurations bNumInterfaces configuration detach_state devnum driver idProduct idVendor manufacturer maxchild power product serial speed version /sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0: bAlternateSetting bInterfaceClass bInterfaceNumber bInterfaceProtocol bInterfaceSubClass bNumEndpoints detach_state driver power /sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0/power: state /sys/devices/pci0000:00/0000:00:1d.2/usb3/power: state /sys/devices/pci0000:00/0000:00:1d.7: class config detach_state device driver irq local_cpus pools power resource subsystem_device subsystem_vendor usb4 vendor /sys/devices/pci0000:00/0000:00:1d.7/power: state /sys/devices/pci0000:00/0000:00:1d.7/usb4: 4-0:1.0 bcdDevice bConfigurationValue bDeviceClass bDeviceProtocol bDeviceSubClass bmAttributes bMaxPower bNumConfigurations bNumInterfaces configuration detach_state devnum driver idProduct idVendor manufacturer maxchild power product serial speed version /sys/devices/pci0000:00/0000:00:1d.7/usb4/4-0:1.0: bAlternateSetting bInterfaceClass bInterfaceNumber bInterfaceProtocol bInterfaceSubClass bNumEndpoints detach_state driver power /sys/devices/pci0000:00/0000:00:1d.7/usb4/4-0:1.0/power: state /sys/devices/pci0000:00/0000:00:1d.7/usb4/power: state /sys/devices/pci0000:00/0000:00:1e.0: 0000:02:00.0 0000:02:01.0 0000:02:01.1 0000:02:02.0 class config detach_state device irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1e.0/0000:02:00.0: class config detach_state device driver irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1e.0/0000:02:00.0/power: state /sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0: class config detach_state device driver irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0/power: state /sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.1: class config detach_state device driver irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.1/power: state /sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0: class config detach_state device driver irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0/power: state /sys/devices/pci0000:00/0000:00:1e.0/power: state /sys/devices/pci0000:00/0000:00:1f.0: class config detach_state device irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1f.0/power: state /sys/devices/pci0000:00/0000:00:1f.1: class config detach_state device driver irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1f.1/power: state /sys/devices/pci0000:00/0000:00:1f.3: class config detach_state device driver i2c-0 irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1f.3/i2c-0: detach_state name power /sys/devices/pci0000:00/0000:00:1f.3/i2c-0/power: state /sys/devices/pci0000:00/0000:00:1f.3/power: state /sys/devices/pci0000:00/0000:00:1f.5: class config detach_state device driver irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1f.5/power: state /sys/devices/pci0000:00/0000:00:1f.6: class config detach_state device driver irq local_cpus power resource subsystem_device subsystem_vendor vendor /sys/devices/pci0000:00/0000:00:1f.6/power: state /sys/devices/pci0000:00/power: state ============================================================== dmesg is attached. Thanks, -- Steve --=-pfOtsUIOu75Wr0258udu Content-Disposition: attachment; filename=dmesg.txt Content-Type: text/plain; name=dmesg.txt; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Linux version 2.6.10 (root@bilbo) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #13 SMP Sat Feb 19 20:12:19 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f6f0000 (usable) BIOS-e820: 000000000f6f0000 - 000000000f700000 (reserved) BIOS-e820: 000000000f700000 - 000000003fef0000 (usable) BIOS-e820: 000000003fef0000 - 000000003fef8000 (ACPI data) BIOS-e820: 000000003fef8000 - 000000003fefa000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6db0 On node 0 totalpages: 261872 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32496 pages, LIFO batch:7 DMI present. ACPI: RSDP (v002 IBM ) @ 0x000f6d80 ACPI: XSDT (v001 IBM TP-1X 0x00001030 LTP 0x00000000) @ 0x3fef1ace ACPI: FADT (v002 IBM TP-1X 0x00001030 IBM 0x00000001) @ 0x3fef1b2a ACPI: SSDT (v001 IBM TP-1X 0x00001030 MSFT 0x0100000d) @ 0x3fef1bde ACPI: ECDT (v001 IBM TP-1X 0x00001030 IBM 0x00000001) @ 0x3fef7eb5 ACPI: MADT (v001 IBM TP-1X 0x00001030 LOHR 0x00000064) @ 0x3fef7f06 ACPI: HPET (v001 IBM TP-1X 0x00001030 PTL 0x00000064) @ 0x3fef7f6e ACPI: TCPA (v001 IBM TP-1X 0x00001030 PTL 0x00000001) @ 0x3fef7fa6 ACPI: BOOT (v001 IBM TP-1X 0x00001030 LTP 0x00000001) @ 0x3fef7fd8 ACPI: DSDT (v001 IBM TP-1X 0x00001030 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1 already used, trying 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0x0 Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: root=/dev/hda1 ro vga=0x305 3 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3320.885 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034040k/1047488k available (2050k kernel code, 12748k reserved, 858k data, 220k init, 129984k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 6586.36 BogoMIPS (lpj=3293184) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................................................................................................................................................................................ Table [DSDT](id F005) - 884 Objects with 52 Devices 240 Methods 15 Regions Parsing all Control Methods:. Table [SSDT](id F003) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI Namespace successfully loaded at root c043a0e0 evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.33GHz stepping 01 per-CPU timeslice cutoff: 2926.44 usecs. task migration cache decay timeout: 3 msecs. Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay loop... 6619.13 BogoMIPS (lpj=3309568) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.33GHz stepping 01 Total of 2 processors activated (13205.50 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: CPU#0 had 0 usecs TSC skew, fixed it up. CPU#1 had 0 usecs TSC skew, fixed it up. Brought up 2 CPUs CPU0: domain 0: span 03 groups: 01 02 domain 1: span 03 groups: 03 CPU1: domain 0: span 03 groups: 02 01 domain 1: span 03 groups: 03 NET: Registered protocol family 16 PCI: BIOS32 Service Directory structure at 0xc00f6d40 PCI: BIOS32 Service Directory entry at 0xfd700 PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=08 PCI: PCI BIOS revision 2.10 entry at 0xfd960, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 6 Wake, Enabled 0 Runtime GPEs in this block ACPI: Found ECDT ACPI: Could not use ECDT Completing Region/Field/Buffer/Package initialization:..................................................................................................................................................... Initialized 15/15 Regions 73/73 Fields 50/50 Buffers 11/19 Packages (894 nodes) Executing all Device _STA and_INI methods:........................................................ 56 Devices found containing: 56 _STA, 4 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: IDE base address fixup for 0000:00:1f.1 PCI: Scanning for ghost devices on bus 0 PCI: Scanning for ghost devices on bus 1 PCI: Scanning for ghost devices on bus 2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 29) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. PCI: IRQ init PCI: Allocating resources PCI: Resource d0000000-dfffffff (f=1208, d=0, p=0) PCI: Resource 00001800-0000181f (f=101, d=0, p=0) PCI: Resource 00001820-0000183f (f=101, d=0, p=0) PCI: Resource 00001840-0000185f (f=101, d=0, p=0) PCI: Resource c0000000-c00003ff (f=200, d=0, p=0) PCI: Resource 00001860-0000186f (f=101, d=0, p=0) PCI: Resource 00001880-0000189f (f=101, d=0, p=0) PCI: Resource 00001c00-00001cff (f=101, d=0, p=0) PCI: Resource 000018c0-000018ff (f=101, d=0, p=0) PCI: Resource c0000c00-c0000dff (f=200, d=0, p=0) PCI: Resource c0000800-c00008ff (f=200, d=0, p=0) PCI: Resource 00002400-000024ff (f=101, d=0, p=0) PCI: Resource 00002000-0000207f (f=101, d=0, p=0) PCI: Resource c1000000-c1ffffff (f=200, d=0, p=0) PCI: Resource e0000000-efffffff (f=1208, d=0, p=0) PCI: Resource c2000000-c200ffff (f=204, d=0, p=0) PCI: Resource c2010000-c201ffff (f=200, d=0, p=0) PCI: Sorting device list... Simple Boot Flag at 0x35 set to 0x1 highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 1536k, total 131072k vesafb: mode is 1024x768x8, linelength=1024, pages=3 vesafb: protected mode interface info at c000:e600 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 169 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: HTS548080M9AT00, ATA DISK drive Probing IDE interface ide1... hdc: MATSHITADVD-RAM UJ-811, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/7877KiB Cache, CHS=65535/16/63 hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI wakeup devices: LID SLPB PCI0 BLAN CBS0 CBS1 USB0 USB1 USB2 AC97 ACPI: (supports S0 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 220k freed NET: Registered protocol family 1 hdc: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Adding 2736680k swap on /dev/hda5. Priority:-1 extents:1 EXT3 FS on hda1, internal journal Generic RTC Driver v1.07 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 ts: Compaq touchscreen protocol output kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 177 Yenta: CardBus bridge found at 0000:02:01.0 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.0, mfunc 0x01001c22, devctl 0x64 Yenta TI: socket 0000:02:01.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:02:01.0 no PCI interrupts. Fish. Please report. Yenta: ISA IRQ mask 0x0000, PCI irq 0 Socket status: ffffffff ACPI: PCI interrupt 0000:02:01.1[B] -> GSI 21 (level, low) -> IRQ 185 Yenta: CardBus bridge found at 0000:02:01.1 [1014:0512] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.1, mfunc 0x01001c22, devctl 0x64 Yenta TI: socket 0000:02:01.1 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:02:01.1 no PCI interrupts. Fish. Please report. Yenta: ISA IRQ mask 0x0000, PCI irq 0 Socket status: 4410080c tg3.c:v3.14 (November 15, 2004) ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 193 eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:06:1b:c6:7c:03 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) wlan: 0.8.4.5 (EXPERIMENTAL) ath_rate_onoe: 1.0 ath_pci: 0.9.4.12 (EXPERIMENTAL) ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 201 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.9 phy 4.3 radio 4.6 ath0: 802.11 address: 00:0e:9b:85:92:61 ath0: Use hw queue 0 for WME_AC_BE traffic ath0: Use hw queue 1 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Atheros 5212: mem=0xc2010000, irq=201 ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ICH4: port 0x01f0 already claimed by ide0 ICH4: port 0x0170 already claimed by ide1 ICH4: neither IDE port enabled (BIOS) usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 193, io base 0x1800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 209, io base 0x1820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 usb 1-2: new full speed USB device using uhci_hcd and address 2 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 201, io base 0x1840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter belkin 1-2:1.0: Belkin / Peracom / GoHubs USB Serial Adapter converter detected drivers/usb/serial/belkin_sa.c: bcdDevice: 0205, bfc: 1 usb 1-2: Belkin / Peracom / GoHubs USB Serial Adapter converter now attached to ttyUSB0 usbcore: registered new driver belkin drivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 217 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 217, pci mem 0xc0000000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb 1-2: USB disconnect, address 2 belkin ttyUSB0: Belkin / Peracom / GoHubs USB Serial Adapter converter now disconnected from ttyUSB0 belkin 1-2:1.0: device disconnected usb 1-2: new full speed USB device using uhci_hcd and address 3 belkin 1-2:1.0: Belkin / Peracom / GoHubs USB Serial Adapter converter detected drivers/usb/serial/belkin_sa.c: bcdDevice: 0205, bfc: 1 usb 1-2: Belkin / Peracom / GoHubs USB Serial Adapter converter now attached to ttyUSB0 input: PC Speaker parport_pc: Ignoring new-style parameters in presence of obsolete ones parport: PnPBIOS parport detected. parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855GM Chipset. agpgart: Maximum main memory to use for agp memory: 940M agpgart: AGP aperture is 256M @ 0xd0000000 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Evaluate _OSC Set fails. Status = 0x0005 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random: RNG not detected Evaluate _OSC Set fails. Status = 0x0005 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50391 usecs intel8x0: clocking to 48000 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1f.6 to 64 MC'97 1 converters and GPIO not ready (0xff00) NET: Registered protocol family 17 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. NET: Registered protocol family 10 Disabled Privacy Extensions on device c03a0aa0(lo) IPv6 over IPv4 tunneling driver ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [AC] (on-line) ACPI: Processor [CPU0] (supports 4 throttling states) ACPI: Processor [CPU1] (supports 4 throttling states) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Thermal Zone [THRM] (53 C) lp0: using parport0 (interrupt-driven). eth0: no IPv6 routers present cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x80f cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0a00-0x0aff: clean. Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.6 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.3 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized IBM machine detected. Enabling interrupts during APM calls. apm: BIOS not found. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 169 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode inserting floppy driver for 2.6.10 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found --=-pfOtsUIOu75Wr0258udu-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/