Return-Path: <linux-kernel-owner+willy=40w.ods.org-S262302AbVBVNYb@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S262302AbVBVNYb (ORCPT <rfc822;willy@w.ods.org>);
	Tue, 22 Feb 2005 08:24:31 -0500
Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262304AbVBVNYb
	(ORCPT <rfc822;linux-kernel-outgoing>);
	Tue, 22 Feb 2005 08:24:31 -0500
Received: from cantor.suse.de ([195.135.220.2]:26080 "EHLO Cantor.suse.de")
	by vger.kernel.org with ESMTP id S262302AbVBVNYM (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Tue, 22 Feb 2005 08:24:12 -0500
Date: Tue, 22 Feb 2005 14:23:58 +0100
Message-ID: <s5hy8dgzq1d.wl@alsa2.suse.de>
From: Takashi Iwai <tiwai@suse.de>
To: uaca@alumni.uv.es
Cc: linux-kernel@vger.kernel.org, Tomas Szepe <szepe@pinerecords.com>
Subject: Re: intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)
In-Reply-To: <20050219121157.GA14437@pusa.informat.uv.es>
References: <20050219121157.GA14437@pusa.informat.uv.es>
User-Agent: Wanderlust/2.10.1 (Watching The Wheels) SEMI/1.14.5 (Awara-Onsen) FLIM/1.14.5 (Demachiyanagi) APEL/10.6 MULE XEmacs/21.4 (patch 15) (Security Through Obscurity) (i386-suse-linux)
MIME-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen")
Content-Type: text/plain; charset=US-ASCII
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 2041
Lines: 53

At Sat, 19 Feb 2005 13:11:57 +0100,
uaca@alumni.uv.es wrote:
> 
> Hello
> 
> I have read a post in lkml.org that states that the problem experienced in
> rc3 has gone (1). That is not the case for me.
> 
> My audio device is
> 
> 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
>         Subsystem: IBM: Unknown device 0554
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 11
>         Region 0: I/O ports at 1c00 [size=256]
>         Region 1: I/O ports at 18c0 [size=64]
>         Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
>         Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> In 2.6.10 and in 2.6.11-rc3 & 4 the clock is set to 48khz.
> 
> eg:
> 
> intel8x0_measure_ac97_clock: measured 49502 usecs
> intel8x0: clocking to 48000
> 
> It uses an Analog Devices AD1981B
> 
> I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 in
> 
> 	http://pusa.uv.es/~ulisses/asound-intel8x0/
> 
> the tar files were done while playing pcm audio, (not being eard in rc4).
> 
> I have found that I had to Mute __both__ "Headphone Jack Sense" and
> "Line Jack Sense" in order to ear the audio in rc4.

Yes, that's correct -> Problem solved?

The patch to correct these states as default wasn't merged to 2.6.11.


Takashi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/