Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262003AbVCHLgk (ORCPT ); Tue, 8 Mar 2005 06:36:40 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262013AbVCHLgj (ORCPT ); Tue, 8 Mar 2005 06:36:39 -0500 Received: from hirsch.in-berlin.de ([192.109.42.6]:42475 "EHLO hirsch.in-berlin.de") by vger.kernel.org with ESMTP id S262003AbVCHLUX (ORCPT ); Tue, 8 Mar 2005 06:20:23 -0500 X-Envelope-From: kraxel@bytesex.org Date: Tue, 8 Mar 2005 12:16:04 +0100 From: Gerd Knorr To: Andrew Morton , Linux Kernel Mailing List , dvb list Subject: [patch] dvb: add or51132 driver (atsc demodulator) Message-ID: <20050308111604.GA31242@bytesex> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.6i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23381 Lines: 762 Hi, This patch adds a new ATSC frontend driver, needed by the cx88-based pcHDTV 3000 card. Also includes a tiny chunk to activate the or51132 support in the cx88-dvb driver. This patch depends on the cx88 dvb driver update. Gerd Signed-off-by: Gerd Knorr --- drivers/media/dvb/frontends/Kconfig | 4 drivers/media/dvb/frontends/Makefile | 2 drivers/media/dvb/frontends/or51132.c | 628 ++++++++++++++++++++++++++ drivers/media/dvb/frontends/or51132.h | 48 + drivers/media/video/Kconfig | 1 drivers/media/video/cx88/cx88-dvb.c | 2 6 files changed, 683 insertions(+), 2 deletions(-) Index: linux-2.6.11/drivers/media/dvb/frontends/or51132.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.11/drivers/media/dvb/frontends/or51132.h 2005-03-07 16:31:12.000000000 +0100 @@ -0,0 +1,48 @@ +/* + * Support for OR51132 (pcHDTV HD-3000) - VSB/QAM + * + * Copyright (C) 2005 Kirk Lapray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +#ifndef OR51132_H +#define OR51132_H + +#include +#include + +struct or51132_config +{ + /* The demodulator's i2c address */ + u8 demod_address; + u8 pll_address; + struct dvb_pll_desc *pll_desc; + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); +}; + +extern struct dvb_frontend* or51132_attach(const struct or51132_config* config, + struct i2c_adapter* i2c); + +#endif // OR51132_H + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ Index: linux-2.6.11/drivers/media/dvb/frontends/or51132.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.11/drivers/media/dvb/frontends/or51132.c 2005-03-07 16:31:12.000000000 +0100 @@ -0,0 +1,628 @@ +/* + * Support for OR51132 (pcHDTV HD-3000) - VSB/QAM + * + * Copyright (C) 2005 Kirk Lapray + * + * Based on code from Jack Kelliher (kelliher@xmission.com) + * Copyright (C) 2002 & pcHDTV, inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +/* + * This driver needs two external firmware files. Please copy + * "dvb-fe-or51132-vsb.fw" and "dvb-fe-or51132-qam.fw" to + * /usr/lib/hotplug/firmware/ or /lib/firmware/ + * (depending on configuration of firmware hotplug). + */ +#define OR51132_VSB_FIRMWARE "dvb-fe-or51132-vsb.fw" +#define OR51132_QAM_FIRMWARE "dvb-fe-or51132-qam.fw" + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "dvb-pll.h" +#include "or51132.h" + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "or51132: " args); \ + } while (0) + + +struct or51132_state +{ + struct i2c_adapter* i2c; + struct dvb_frontend_ops ops; + + /* Configuration settings */ + const struct or51132_config* config; + + struct dvb_frontend frontend; + + /* Demodulator private data */ + fe_modulation_t current_modulation; + + /* Tuner private data */ + u32 current_frequency; +}; + +static int i2c_writebytes (struct or51132_state* state, u8 reg, u8 *buf, int len) +{ + int err; + struct i2c_msg msg; + msg.addr = reg; + msg.flags = 0; + msg.len = len; + msg.buf = buf; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "or51132: i2c_writebytes error (addr %02x, err == %i)\n", reg, err); + return -EREMOTEIO; + } + + return 0; +} + +static u8 i2c_readbytes (struct or51132_state* state, u8 reg, u8* buf, int len) +{ + int err; + struct i2c_msg msg; + msg.addr = reg; + msg.flags = I2C_M_RD; + msg.len = len; + msg.buf = buf; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "or51132: i2c_readbytes error (addr %02x, err == %i)\n", reg, err); + return -EREMOTEIO; + } + + return 0; +} + +static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +{ + struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + static u8 run_buf[] = {0x7F,0x01}; + static u8 get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00}; + u8 rec_buf[14]; + u8 cmd_buf[14]; + u32 firmwareAsize, firmwareBsize; + int i,ret; + + dprintk("Firmware is %ld bytes\n",fw->size); + + /* Get size of firmware A and B */ + firmwareAsize = le32_to_cpu(*((u32*)fw->data)); + dprintk("FirmwareA is %i bytes\n",firmwareAsize); + firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4))); + dprintk("FirmwareB is %i bytes\n",firmwareBsize); + + /* Upload firmware */ + if ((ret = i2c_writebytes(state,state->config->demod_address, + &fw->data[8],firmwareAsize))) { + printk(KERN_WARNING "or51132: load_firmware error 1\n"); + return ret; + } + msleep(1); /* 1ms */ + if ((ret = i2c_writebytes(state,state->config->demod_address, + &fw->data[8+firmwareAsize],firmwareBsize))) { + printk(KERN_WARNING "or51132: load_firmware error 2\n"); + return ret; + } + msleep(1); /* 1ms */ + + if ((ret = i2c_writebytes(state,state->config->demod_address, + run_buf,2))) { + printk(KERN_WARNING "or51132: load_firmware error 3\n"); + return ret; + } + + /* Wait at least 5 msec */ + msleep(20); /* 10ms */ + + if ((ret = i2c_writebytes(state,state->config->demod_address, + run_buf,2))) { + printk(KERN_WARNING "or51132: load_firmware error 4\n"); + return ret; + } + + /* 50ms for operation to begin */ + msleep(50); + + /* Read back ucode version to besure we loaded correctly and are really up and running */ + /* Get uCode version */ + cmd_buf[0] = 0x10; + cmd_buf[1] = 0x10; + cmd_buf[2] = 0x00; + cmd_buf[3] = 0x00; + msleep(20); /* 20ms */ + if ((ret = i2c_writebytes(state,state->config->demod_address, + cmd_buf,3))) { + printk(KERN_WARNING "or51132: load_firmware error a\n"); + return ret; + } + + cmd_buf[0] = 0x04; + cmd_buf[1] = 0x17; + cmd_buf[2] = 0x00; + cmd_buf[3] = 0x00; + msleep(20); /* 20ms */ + if ((ret = i2c_writebytes(state,state->config->demod_address, + cmd_buf,2))) { + printk(KERN_WARNING "or51132: load_firmware error b\n"); + return ret; + } + + cmd_buf[0] = 0x00; + cmd_buf[1] = 0x00; + cmd_buf[2] = 0x00; + cmd_buf[3] = 0x00; + msleep(20); /* 20ms */ + if ((ret = i2c_writebytes(state,state->config->demod_address, + cmd_buf,2))) { + printk(KERN_WARNING "or51132: load_firmware error c\n"); + return ret; + } + + for(i=0;i<4;i++) { + msleep(20); /* 20ms */ + get_ver_buf[4] = i+1; + if ((ret = i2c_readbytes(state,state->config->demod_address, + &rec_buf[i*2],2))) { + printk(KERN_WARNING + "or51132: load_firmware error d - %d\n",i); + return ret; + } + } + + printk(KERN_WARNING + "or51132: Version: %02X%02X%02X%02X-%02X%02X%02X%02X (%02X%01X-%01X-%02X%01X-%01X)\n", + rec_buf[1],rec_buf[0],rec_buf[3],rec_buf[2], + rec_buf[5],rec_buf[4],rec_buf[7],rec_buf[6], + rec_buf[3],rec_buf[2]>>4,rec_buf[2]&0x0f, + rec_buf[5],rec_buf[4]>>4,rec_buf[4]&0x0f); + + cmd_buf[0] = 0x10; + cmd_buf[1] = 0x00; + cmd_buf[2] = 0x00; + cmd_buf[3] = 0x00; + msleep(20); /* 20ms */ + if ((ret = i2c_writebytes(state,state->config->demod_address, + cmd_buf,3))) { + printk(KERN_WARNING "or51132: load_firmware error e\n"); + return ret; + } + return 0; +}; + +static int or51132_init(struct dvb_frontend* fe) +{ + return 0; +} + +static int or51132_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = 0; + return 0; +} + +static int or51132_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int or51132_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int or51132_setmode(struct dvb_frontend* fe) +{ + struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + unsigned char cmd_buf[4]; + + dprintk("setmode %d\n",(int)state->current_modulation); + /* set operation mode in Receiver 1 register; */ + cmd_buf[0] = 0x04; + cmd_buf[1] = 0x01; + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + case QAM_AUTO: + /* Auto-deinterleave; MPEG ser, MPEG2tr, phase noise-high*/ + cmd_buf[2] = 0x5F; + break; + case VSB_8: + /* Auto CH, Auto NTSC rej, MPEGser, MPEG2tr, phase noise-high*/ + cmd_buf[2] = 0x50; + break; + default: + printk("setmode:Modulation set to unsupported value\n"); + }; + cmd_buf[3] = 0x00; + if (i2c_writebytes(state,state->config->demod_address, + cmd_buf,3)) { + printk(KERN_WARNING "or51132: set_mode error 1\n"); + return -1; + } + dprintk("or51132: set #1 to %02x\n", cmd_buf[2]); + + /* Set operation mode in Receiver 6 register */ + cmd_buf[0] = 0x1C; + switch (state->current_modulation) { + case QAM_AUTO: + /* REC MODE Normal Carrier Lock */ + cmd_buf[1] = 0x00; + /* Channel MODE Auto QAM64/256 */ + cmd_buf[2] = 0x4f; + break; + case QAM_256: + /* REC MODE Normal Carrier Lock */ + cmd_buf[1] = 0x00; + /* Channel MODE QAM256 */ + cmd_buf[2] = 0x45; + break; + case QAM_64: + /* REC MODE Normal Carrier Lock */ + cmd_buf[1] = 0x00; + /* Channel MODE QAM64 */ + cmd_buf[2] = 0x43; + break; + case VSB_8: + /* REC MODE inv IF spectrum, Normal */ + cmd_buf[1] = 0x03; + /* Channel MODE ATSC/VSB8 */ + cmd_buf[2] = 0x06; + break; + default: + printk("setmode: Modulation set to unsupported value\n"); + }; + cmd_buf[3] = 0x00; + msleep(20); /* 20ms */ + if (i2c_writebytes(state,state->config->demod_address, + cmd_buf,3)) { + printk(KERN_WARNING "or51132: set_mode error 2\n"); + return -1; + } + dprintk("or51132: set #6 to 0x%02x%02x\n", cmd_buf[1], cmd_buf[2]); + + return 0; +} + +static int or51132_set_parameters(struct dvb_frontend* fe, + struct dvb_frontend_parameters *param) +{ + int ret; + u8 buf[4]; + struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + const struct firmware *fw; + + /* Change only if we are actually changing the modulation */ + if (state->current_modulation != param->u.vsb.modulation) { + switch(param->u.vsb.modulation) { + case VSB_8: + dprintk("set_parameters VSB MODE\n"); + printk("or51132: Waiting for firmware upload(%s)...\n", + OR51132_VSB_FIRMWARE); + ret = request_firmware(&fw, OR51132_VSB_FIRMWARE, + &state->i2c->dev); + if (ret){ + printk(KERN_WARNING "or51132: No firmware up" + "loaded(timeout or file not found?)\n"); + return ret; + } + /* Set non-punctured clock for VSB */ + state->config->set_ts_params(fe, 0); + break; + case QAM_AUTO: + case QAM_64: + case QAM_256: + dprintk("set_parameters QAM MODE\n"); + printk("or51132: Waiting for firmware upload(%s)...\n", + OR51132_QAM_FIRMWARE); + ret = request_firmware(&fw, OR51132_QAM_FIRMWARE, + &state->i2c->dev); + if (ret){ + printk(KERN_WARNING "or51132: No firmware up" + "loaded(timeout or file not found?)\n"); + return ret; + } + /* Set punctured clock for QAM */ + state->config->set_ts_params(fe, 1); + break; + default: + printk("or51132:Modulation type(%d) UNSUPPORTED\n", + param->u.vsb.modulation); + return -1; + }; + ret = or51132_load_firmware(fe, fw); + release_firmware(fw); + if (ret) { + printk(KERN_WARNING "or51132: Writing firmware to " + "device failed!\n"); + return ret; + } + printk("or51132: Firmware upload complete.\n"); + + state->current_modulation = param->u.vsb.modulation; + or51132_setmode(fe); + } + + /* Change only if we are actually changing the channel */ + if (state->current_frequency != param->frequency) { + dvb_pll_configure(state->config->pll_desc, buf, + param->frequency, 0); + dprintk("set_parameters tuner bytes: 0x%02x 0x%02x " + "0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]); + if (i2c_writebytes(state, state->config->pll_address ,buf, 4)) + printk(KERN_WARNING "or51132: set_parameters error " + "writing to tuner\n"); + + /* Set to current mode */ + or51132_setmode(fe); + + /* Update current frequency */ + state->current_frequency = param->frequency; + } + return 0; +} + +static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + unsigned char rec_buf[2]; + unsigned char snd_buf[2]; + *status = 0; + + /* Receiver Status */ + snd_buf[0]=0x04; + snd_buf[1]=0x00; + msleep(30); /* 30ms */ + if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) { + printk(KERN_WARNING "or51132: read_status write error\n"); + return -1; + } + msleep(30); /* 30ms */ + if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { + printk(KERN_WARNING "or51132: read_status read error\n"); + return -1; + } + dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]); + + if (rec_buf[1] & 0x01) { /* Receiver Lock */ + *status |= FE_HAS_SIGNAL; + *status |= FE_HAS_CARRIER; + *status |= FE_HAS_VITERBI; + *status |= FE_HAS_SYNC; + *status |= FE_HAS_LOCK; + } + return 0; +} + +/* log10-1 table at .5 increments from 1 to 100.5 */ +unsigned int i100x20log10[] = { + 0, 352, 602, 795, 954, 1088, 1204, 1306, 1397, 1480, + 1556, 1625, 1690, 1750, 1806, 1858, 1908, 1955, 2000, 2042, + 2082, 2121, 2158, 2193, 2227, 2260, 2292, 2322, 2352, 2380, + 2408, 2434, 2460, 2486, 2510, 2534, 2557, 2580, 2602, 2623, + 2644, 2664, 2684, 2704, 2723, 2742, 2760, 2778, 2795, 2813, + 2829, 2846, 2862, 2878, 2894, 2909, 2924, 2939, 2954, 2968, + 2982, 2996, 3010, 3023, 3037, 3050, 3062, 3075, 3088, 3100, + 3112, 3124, 3136, 3148, 3159, 3170, 3182, 3193, 3204, 3214, + 3225, 3236, 3246, 3256, 3266, 3276, 3286, 3296, 3306, 3316, + 3325, 3334, 3344, 3353, 3362, 3371, 3380, 3389, 3397, 3406, + 3415, 3423, 3432, 3440, 3448, 3456, 3464, 3472, 3480, 3488, + 3496, 3504, 3511, 3519, 3526, 3534, 3541, 3549, 3556, 3563, + 3570, 3577, 3584, 3591, 3598, 3605, 3612, 3619, 3625, 3632, + 3639, 3645, 3652, 3658, 3665, 3671, 3677, 3683, 3690, 3696, + 3702, 3708, 3714, 3720, 3726, 3732, 3738, 3744, 3750, 3755, + 3761, 3767, 3772, 3778, 3784, 3789, 3795, 3800, 3806, 3811, + 3816, 3822, 3827, 3832, 3838, 3843, 3848, 3853, 3858, 3863, + 3868, 3874, 3879, 3884, 3888, 3893, 3898, 3903, 3908, 3913, + 3918, 3922, 3927, 3932, 3936, 3941, 3946, 3950, 3955, 3960, + 3964, 3969, 3973, 3978, 3982, 3986, 3991, 3995, 4000, 4004, +}; + +unsigned int denom[] = {1,1,100,1000,10000,100000,1000000,10000000,100000000}; + +unsigned int i20Log10(unsigned short val) +{ + unsigned int rntval = 100; + unsigned int tmp = val; + unsigned int exp = 1; + + while(tmp > 100) {tmp /= 100; exp++;} + + val = (2 * val)/denom[exp]; + if (exp > 1) rntval = 2000*exp; + + rntval += i100x20log10[val]; + return rntval; +} + +static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + unsigned char rec_buf[2]; + unsigned char snd_buf[2]; + u8 rcvr_stat; + u16 snr_equ; + int usK; + + snd_buf[0]=0x04; + snd_buf[1]=0x02; /* SNR after Equalizer */ + msleep(30); /* 30ms */ + if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) { + printk(KERN_WARNING "or51132: read_status write error\n"); + return -1; + } + msleep(30); /* 30ms */ + if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { + printk(KERN_WARNING "or51132: read_status read error\n"); + return -1; + } + snr_equ = rec_buf[0] | (rec_buf[1] << 8); + dprintk("read_signal_strength snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ); + + /* Receiver Status */ + snd_buf[0]=0x04; + snd_buf[1]=0x00; + msleep(30); /* 30ms */ + if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) { + printk(KERN_WARNING "or51132: read_signal_strength read_status write error\n"); + return -1; + } + msleep(30); /* 30ms */ + if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { + printk(KERN_WARNING "or51132: read_signal_strength read_status read error\n"); + return -1; + } + dprintk("read_signal_strength read_status %x %x\n",rec_buf[0],rec_buf[1]); + rcvr_stat = rec_buf[1]; + usK = (rcvr_stat & 0x10) ? 3 : 0; + + /* The value reported back from the frontend will be FFFF=100% 0000=0% */ + *strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000; + dprintk("read_signal_strength %i\n",*strength); + + return 0; +} + +static int or51132_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + unsigned char rec_buf[2]; + unsigned char snd_buf[2]; + u16 snr_equ; + + snd_buf[0]=0x04; + snd_buf[1]=0x02; /* SNR after Equalizer */ + msleep(30); /* 30ms */ + if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) { + printk(KERN_WARNING "or51132: read_snr write error\n"); + return -1; + } + msleep(30); /* 30ms */ + if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { + printk(KERN_WARNING "or51132: read_snr dvr read error\n"); + return -1; + } + snr_equ = rec_buf[0] | (rec_buf[1] << 8); + dprintk("read_snr snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ); + + *snr = 0xFFFF - snr_equ; + dprintk("read_snr %i\n",*snr); + + return 0; +} + +static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) +{ + fe_tune_settings->min_delay_ms = 500; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + + return 0; +} + +static void or51132_release(struct dvb_frontend* fe) +{ + struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops or51132_ops; + +struct dvb_frontend* or51132_attach(const struct or51132_config* config, + struct i2c_adapter* i2c) +{ + struct or51132_state* state = NULL; + + /* Allocate memory for the internal state */ + state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &or51132_ops, sizeof(struct dvb_frontend_ops)); + state->current_frequency = -1; + state->current_modulation = -1; + + /* Create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + if (state) + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops or51132_ops = { + + .info = { + .name = "Oren OR51132 VSB/QAM Frontend", + .type = FE_ATSC, + .frequency_min = 44000000, + .frequency_max = 958000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO | + FE_CAN_8VSB + }, + + .release = or51132_release, + + .init = or51132_init, + .sleep = or51132_sleep, + + .set_frontend = or51132_set_parameters, + .get_tune_settings = or51132_get_tune_settings, + + .read_status = or51132_read_status, + .read_ber = or51132_read_ber, + .read_signal_strength = or51132_read_signal_strength, + .read_snr = or51132_read_snr, + .read_ucblocks = or51132_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("OR51132 ATSC [pcHDTV HD-3000] (8VSB & ITU J83 AnnexB FEC QAM64/256) Demodulator Driver"); +MODULE_AUTHOR("Kirk Lapray"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(or51132_attach); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ Index: linux-2.6.11/drivers/media/dvb/frontends/Makefile =================================================================== --- linux-2.6.11.orig/drivers/media/dvb/frontends/Makefile 2005-03-07 16:25:54.000000000 +0100 +++ linux-2.6.11/drivers/media/dvb/frontends/Makefile 2005-03-07 16:31:05.000000000 +0100 @@ -26,4 +26,4 @@ obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o obj-$(CONFIG_DVB_TDA10021) += tda10021.o obj-$(CONFIG_DVB_STV0297) += stv0297.o obj-$(CONFIG_DVB_NXT2002) += nxt2002.o - +obj-$(CONFIG_DVB_OR51132) += or51132.o Index: linux-2.6.11/drivers/media/dvb/frontends/Kconfig =================================================================== --- linux-2.6.11.orig/drivers/media/dvb/frontends/Kconfig 2005-03-07 10:12:55.000000000 +0100 +++ linux-2.6.11/drivers/media/dvb/frontends/Kconfig 2005-03-07 16:31:05.000000000 +0100 @@ -157,4 +157,8 @@ config DVB_NXT2002 help An ATSC 8VSB tuner module. Say Y when you want to support this frontend. +config DVB_OR51132 + tristate "OR51132 based (pcHDTV)" + depends on DVB_CORE + endmenu Index: linux-2.6.11/drivers/media/video/Kconfig =================================================================== --- linux-2.6.11.orig/drivers/media/video/Kconfig 2005-03-07 16:31:00.000000000 +0100 +++ linux-2.6.11/drivers/media/video/Kconfig 2005-03-07 16:31:05.000000000 +0100 @@ -328,6 +328,7 @@ config VIDEO_CX88_DVB select VIDEO_BUF_DVB select DVB_MT352 select DVB_CX22702 + select DVB_OR51132 ---help--- This adds support for DVB/ATSC cards based on the Connexant 2388x chip. Index: linux-2.6.11/drivers/media/video/cx88/cx88-dvb.c =================================================================== --- linux-2.6.11.orig/drivers/media/video/cx88/cx88-dvb.c 2005-03-07 16:31:00.000000000 +0100 +++ linux-2.6.11/drivers/media/video/cx88/cx88-dvb.c 2005-03-07 16:31:05.000000000 +0100 @@ -32,7 +32,7 @@ /* those two frontends need merging via linuxtv cvs ... */ #define HAVE_CX22702 1 -#define HAVE_OR51132 0 +#define HAVE_OR51132 1 #include "cx88.h" #include "dvb-pll.h" -- #define printk(args...) fprintf(stderr, ## args) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/