Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262737AbVDANAX (ORCPT ); Fri, 1 Apr 2005 08:00:23 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262736AbVDANAW (ORCPT ); Fri, 1 Apr 2005 08:00:22 -0500 Received: from smtp05.web.de ([217.72.192.209]:43919 "EHLO smtp05.web.de") by vger.kernel.org with ESMTP id S262738AbVDAM4X (ORCPT ); Fri, 1 Apr 2005 07:56:23 -0500 Message-ID: <424D44F0.6090707@web.de> Date: Fri, 01 Apr 2005 14:56:16 +0200 From: Michael Thonke User-Agent: Mozilla Thunderbird 1.0.2 (Windows/20050323) X-Accept-Language: de-DE, de, en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: PCI-Express not working/unuseable on Intel 925XE Chipset since 2.6.12-rc1[mm1-4] Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Antivirus: avast! (VPS 0513-2, 01.04.2005), Outbound message X-Antivirus-Status: Clean Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29494 Lines: 690 Hello, since the first version of 2.6.12-rc1 and mm[1-4] kernel I can't use any of my PCI-Express devices that worked with all 2.6.11.[1-6] kernels. It's a real odd right now. I have 25 computers with an Intel 925XE Chipset based motherboards and Intel 6xx CPU on it. So far it does not metter which vendor I choose (ASUS,ABIT,MSI etc.) the problem stay the same and spread all over.I tried to boot with pci=routeicq but it did not help to get one device working with any 2.6.12-rc1-xx kernel. As I mentioned before I tested it with on several (over 25 computer) with various motherboards (with ASUS,ABIT,MSI etc.) no luck. Its an 64bit system with [EMT64] and SMP/SMT and preempt enabled + cpufreq. My first look was on PCI Routingtable and I found a difference to 2.6.11.x working kernel: So far Thanks in advance and best regards //possible bug/problem PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:04:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Can't get handler for 0000:00:1b.0 --> why this happen ACPI: Can't get handler for 0000:00:1f.3 --> it does not appear ACPI: Can't get handler for 0000:04:00.0 --> on 2.6.11.x kernels. ACPI: Can't get handler for 0000:02:00.0 --> - * - ACPI: Can't get handler for 0000:01:09.0 --> - * - ACPI: Can't get handler for 0000:01:0a.0 --> - * - //this looks like a garbage routing and handler table here ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) //lspci -v output 0000:00:00.0 Host bridge: Intel Corporation 925X/XE Memory Controller Hub (rev 0e) Subsystem: Intel Corporation: Unknown device 2580 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] #09 [0109] 0000:00:01.0 PCI bridge: Intel Corporation 925X/XE PCI Express Root Port (rev 0e) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: d2f00000-d7ffffff Prefetchable memory behind bridge: d8000000-dfffffff Expansion ROM at 0000e000 [disabled] [size=4K] Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [a0] #10 [0141] 0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc.: Unknown device 813d Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at d2cf4000 (64-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] #10 [0091] 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Expansion ROM at 0000d000 [disabled] [size=4K] Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: d2e00000-d2efffff Expansion ROM at 0000c000 [disabled] [size=4K] Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 Flags: bus master, medium devsel, latency 0, IRQ 50 I/O ports at 9880 [size=32] 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 Flags: bus master, medium devsel, latency 0, IRQ 233 I/O ports at 9c00 [size=32] 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at a000 [size=32] 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at a080 [size=32] 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 Flags: bus master, medium devsel, latency 0, IRQ 50 Memory at d2cff800 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0] 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: d2d00000-d2dfffff Expansion ROM at 0000b000 [disabled] [size=4K] Capabilities: [50] #0d [0000] 0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04) Flags: bus master, medium devsel, latency 0 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at ffa0 [size=16] 0000:00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 04) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc.: Unknown device 2601 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 233 I/O ports at ac00 I/O ports at a880 [size=4] I/O ports at a800 [size=8] I/O ports at a480 [size=4] I/O ports at a400 [size=16] Memory at d2cffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 Flags: medium devsel I/O ports at 0400 [size=32] 0000:01:09.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) Subsystem: TERRATEC Electronic GmbH: Unknown device 1158 Flags: bus master, medium devsel, latency 32, IRQ 7 Memory at d2dff800 (32-bit, non-prefetchable) Capabilities: [40] Power Management version 1 0000:01:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86) Subsystem: D-Link System Inc DFE-530TX rev C Flags: bus master, medium devsel, latency 32, IRQ 217 I/O ports at b800 [size=d2de0000] Memory at d2dffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at 00010000 [disabled] Capabilities: [40] Power Management version 2 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit Ethernet Controller (rev 19) Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet Controller (Asus) Flags: bus master, fast devsel, latency 0, IRQ 7 Memory at d2efc000 (64-bit, non-prefetchable) [size=d2ec0000] I/O ports at c800 [size=256] Expansion ROM at 00020000 [disabled] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [e0] #10 [0011] 0000:04:00.0 VGA compatible controller: nVidia Corporation NV43 [MSI NX6600GT-TD128E] (rev a2) (prog-if 00 [VGA]) Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at d4000000 (32-bit, non-prefetchable) [size=d2fe0000] Memory at d8000000 (64-bit, prefetchable) [size=128M] Memory at d3000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at 00020000 [disabled] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [78] #10 [0001] //dmesg output Linux version 2.6.12-rc1-mm4 (root@ioGL64NX) (gcc-Version 3.4.3-20050110 (Gentoo Linux 3.4.3.20050110-r1, ssp-3.4.3.20050110-0, pie-8.7.7)) #1 SMP PREEMPT Fri Apr 1 03:47:10 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fafa0 ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @ 0x000000003ffb0100 ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @ 0x000000003ffb0290 ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @ 0x000000003ffb0390 ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @ 0x000000003ffbe040 ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @ 0x000000003ffb6c40 ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 On node 0 totalpages: 262064 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 257968 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Built 1 zonelists Initializing CPU#0 Kernel command line: root=/dev/md0 vga=794 console=tty0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 3236.075 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1025400k/1048256k available (2858k kernel code, 22228k reserved, 1187k data, 208k init) Calibrating delay loop... 6389.76 BogoMIPS (lpj=3194880) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) Using IO APIC NMI watchdog CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03 Booting processor 1/1 rip 6000 rsp ffff81003ff19f58 Initializing CPU#1 Calibrating delay loop... 6455.29 BogoMIPS (lpj=3227648) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03 Total of 2 processors activated (12845.05 BogoMIPS). activating NMI Watchdog ... done. Using local APIC timer interrupts. Detected 12.640 MHz APIC timer. checking TSC synchronization across 2 CPUs: passed. time.c: Using PIT/TSC based timekeeping. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 domain 1: span 3 groups: 3 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 domain 1: span 3 groups: 3 NET: Registered protocol family 16 PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:04:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Can't get handler for 0000:00:1b.0 ACPI: Can't get handler for 0000:00:1f.3 ACPI: Can't get handler for 0000:04:00.0 ACPI: Can't get handler for 0000:02:00.0 ACPI: Can't get handler for 0000:01:09.0 ACPI: Can't get handler for 0000:01:0a.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report IA-32 Microcode Update Driver: v1.14 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1112328651.185:0): initialized inotify device minor=63 Initializing Cryptographic API ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] ACPI: No ACPI bus support for pcie00 Allocate Port Service[pcie03] ACPI: No ACPI bus support for pcie03 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] ACPI: No ACPI bus support for pcie00 Allocate Port Service[pcie02] ACPI: No ACPI bus support for pcie02 Allocate Port Service[pcie03] ACPI: No ACPI bus support for pcie03 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] ACPI: No ACPI bus support for pcie00 Allocate Port Service[pcie02] ACPI: No ACPI bus support for pcie02 Allocate Port Service[pcie03] ACPI: No ACPI bus support for pcie03 vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using 5120k, total 131072k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI: No ACPI bus support for vesafb.0 fb1: Virtual frame buffer device, using 1024K of video memory ACPI: No ACPI bus support for vfb.0 ACPI: Processor [CPU1] (supports 8 throttling states) Real Time Clock Driver v1.12 hw_random: RNG not detected io scheduler noop registered io scheduler cfq registered ACPI: Floppy Controller [FDC] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: No ACPI bus support for floppy.0 RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com ub: sizeof ub_scsi_cmd 88 ub_dev 2680 usbcore: registered new driver ub via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 217 eth0: VIA Rhine III at 0xd2dffc00, 00:0d:88:17:47:40, IRQ 217. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 225 ICH6: chipset revision 4 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ACPI: No ACPI bus support for 0.0 Probing IDE interface ide1... hda: ATAPI 94X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 libata version 1.10 loaded. ata_piix version 1.03 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 233 ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 233 ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:20ff ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48 ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:20ff ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48 ata1: dev 0 configured for UDMA/133 ata1: dev 1 configured for UDMA/133 scsi0 : ata_piix ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:20ff ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48 ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:20ff ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48 ata2: dev 0 configured for UDMA/133 ata2: dev 1 configured for UDMA/133 scsi1 : ata_piix Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10 Type: Direct-Access ANSI SCSI revision: 05 ACPI: No ACPI bus support for 0:0:0:0 Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 Type: Direct-Access ANSI SCSI revision: 05 ACPI: No ACPI bus support for 0:0:1:0 Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10 Type: Direct-Access ANSI SCSI revision: 05 ACPI: No ACPI bus support for 1:0:0:0 Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 Type: Direct-Access ANSI SCSI revision: 05 ACPI: No ACPI bus support for 1:0:1:0 SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB) SCSI device sda: drive cache: write back SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 < sdb5 > Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB) Losing some ticks... checking if CPU frequency changed. SCSI device sdc: drive cache: write back SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 < sdc5 sdc6 > Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0 SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdd: drive cache: write back sdd: sdd1 Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0 Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0 Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0 usbmon: debugs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 50, io mem 0xd2cff800 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 ACPI: No ACPI bus support for usb1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: No ACPI bus support for 1-0:1.0 USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 50, io base 0x00009880 ACPI: No ACPI bus support for usb2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: No ACPI bus support for 2-0:1.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 233, io base 0x00009c00 ACPI: No ACPI bus support for usb3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: No ACPI bus support for 3-0:1.0 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000a000 ACPI: No ACPI bus support for usb4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: No ACPI bus support for 4-0:1.0 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080 ACPI: No ACPI bus support for usb5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: No ACPI bus support for 5-0:1.0 Initializing USB Mass Storage driver... usb 3-1: new low speed USB device using uhci_hcd and address 2 ACPI: No ACPI bus support for 3-1 ACPI: No ACPI bus support for 3-1:1.0 ACPI: No ACPI bus support for 3-1:1.1 usb 3-2: new low speed USB device using uhci_hcd and address 3 ACPI: No ACPI bus support for 3-2 ACPI: No ACPI bus support for 3-2:1.0 usbcore: registered new driver usb-storage USB Mass Storage support registered. input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.1-1 input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.1-1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 4704.000 MB/sec raid5: using function: generic_sse (4704.000 MB/sec) md: multipath personality registered as nr 7 md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA device list: #0: HDA Intel at 0xd2cf4000 irq 169 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (4094 buckets, 32752 max) - 304 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 Testing NMI watchdog ... OK. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available ACPI wakeup devices: P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97 ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: considering sdd1 ... md: adding sdd1 ... md: adding sdc6 ... md: sdc5 has different UUID to sdd1 md: adding sdb1 ... md: adding sda6 ... md: sda5 has different UUID to sdd1 md: created md1 md: bind md: bind md: bind md: bind md: running: md1: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sdd1 raid0: comparing sdd1(14996544) with sdd1(14996544) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdc6 raid0: comparing sdc6(14996544) with sdd1(14996544) raid0: EQUAL raid0: looking at sdb1 raid0: comparing sdb1(14996544) with sdd1(14996544) raid0: EQUAL raid0: looking at sda6 raid0: comparing sda6(14996544) with sdd1(14996544) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 59986176 blocks. raid0 : conf->hash_spacing is 59986176 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: considering sdc5 ... md: adding sdc5 ... md: adding sda5 ... md: created md0 md: bind md: bind md: running: md0: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sdc5 raid0: comparing sdc5(30001280) with sdc5(30001280) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda5 raid0: comparing sda5(30001280) with sdc5(30001280) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 60002560 blocks. raid0 : conf->hash_spacing is 60002560 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: ... autorun DONE. ReiserFS: md0: found reiserfs format "3.6" with standard journal ReiserFS: md0: using ordered data mode ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md0: checking transaction log (md0) ReiserFS: md0: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 208k freed nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:04:00.0 to 64 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:45:40 PST 2005 ReiserFS: sdc1: found reiserfs format "3.6" with standard journal ReiserFS: sdc1: using ordered data mode ReiserFS: sdc1: journal params: device sdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdc1: checking transaction log (sdc1) ReiserFS: sdc1: Using r5 hash to sort names - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/