Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261211AbVDDKXT (ORCPT ); Mon, 4 Apr 2005 06:23:19 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261213AbVDDKXT (ORCPT ); Mon, 4 Apr 2005 06:23:19 -0400 Received: from bayc1-pasmtp03.bayc1.hotmail.com ([65.54.191.163]:23813 "EHLO BAYC1-PASMTP03.cez.ice") by vger.kernel.org with ESMTP id S261211AbVDDKXB (ORCPT ); Mon, 4 Apr 2005 06:23:01 -0400 Message-ID: X-Originating-IP: [209.226.122.45] X-Originating-Email: [mostly_harmless@sympatico.ca] Message-ID: <002401c53900$9a47b0e0$1d2aa8c0@stormie> From: "Don Guy" To: Subject: PROBLEM: v2.4.29 won't compile with PCI support disabled Date: Mon, 4 Apr 2005 06:25:15 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 X-OriginalArrivalTime: 04 Apr 2005 10:22:57.0684 (UTC) FILETIME=[45633540:01C53900] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4949 Lines: 154 PROBLEM: Attempts to compile v2.4.29 with PCI support disabled result in the following errors: drivers/char/char.o: In function `siig10x_init_fn': drivers/char/char.o(.text.init+0x12cd): undefined reference to `pci_siig10x_fn' drivers/char/char.o: In function `siig20x_init_fn': drivers/char/char.o(.text.init+0x12ed): undefined reference to `pci_siig20x_fn' It has been suggested that enabling PCI support in the kernel will make this go away however a) enabling PCI support on a 486 which only has ISA & VLB is downright silly, and b) a test run with CONFIG_PCI=y resulted in a plethora of other errors. Current kernel version: Linux version 2.4.5 (root@bigkitty) (gcc version 2.95.3 20010315 (release)) #10 Fri Jun 22 02:20:21 PDT 2001 >From .config: # # General setup CONFIG_NET=y # CONFIG_PCI is not set CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_OOM_KILLER=y # CONFIG_PM is not set # CONFIG_APM is not set Software (from ver_linux): If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux deepthought 2.4.5 #10 Fri Jun 22 02:20:21 PDT 2001 i486 unknown Gnu C 2.95.3 Gnu make 3.79.1 binutils 2.11.90.0.19 util-linux 2.11f mount 2.11b modutils 2.4.16 e2fsprogs 1.27 PPP 2.4.1 awk: cmd. line:2: (FILENAME=- FNR=1) fatal: attempt to access field -1 Dynamic linker (ldd) 2.3.4 Procps 2.0.7 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0 Modules Loaded ne 8390 isa-pnp ppp_deflate ppp_async ppp_generic lp parport_pc parport Processor (from /proc/cpuinfo): processor : 0 vendor_id : unknown cpu family : 4 model : 0 model name : 486 stepping : unknown fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : no cpuid level : -1 wp : yes flags : bogomips : 33.17 Modules (from /proc/modules): ne 6720 1 8390 6112 0 [ne] isa-pnp 27400 0 [ne] ppp_deflate 39008 0 (unused) ppp_async 6624 0 (unused) ppp_generic 16648 0 [ppp_deflate ppp_async] lp 5888 0 (unused) parport_pc 19172 1 parport 23040 1 [lp parport_pc] Loaded driver and hardware information (from /proc/ioports, /proc/iomem): 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0240-025f : eth0 02f8-02ff : serial(set) 0330-0333 : aha1542 0378-037a : parport0 03c0-03df : vga+ 03f8-03ff : serial(auto) 00000000-0009efff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c8000-000cbfff : Extension ROM 000f0000-000fffff : System ROM 00100000-01ffffff : System RAM 00100000-002beda7 : Kernel code 002beda8-0039a7e7 : Kernel data PCI Information: n/a SCSI information (from /proc/scsi/scsi): Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: SEAGATE Model: ST34572WS Rev: HP00 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: SEAGATE Model: ST34572W Rev: 0876 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 04 Lun: 00 Vendor: TOSHIBA Model: CD-ROM XM-3701TA Rev: 0236 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: PIONEER Model: CD-ROM DR-124X Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: ARCHIVE Model: Python 25501-XXX Rev: 5.AC Type: Sequential-Access ANSI SCSI revision: 02 Any help appreciated! -d. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/