Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 16 Jul 2001 14:29:51 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 16 Jul 2001 14:29:46 -0400 Received: from c009-h017.c009.snv.cp.net ([209.228.34.130]:7065 "HELO c009.snv.cp.net") by vger.kernel.org with SMTP id ; Mon, 16 Jul 2001 14:29:33 -0400 X-Sent: 16 Jul 2001 18:29:30 GMT Date: Mon, 16 Jul 2001 11:28:59 -0700 (PDT) From: "Jeffrey W. Baker" X-X-Sender: To: Marko Rebrina cc: Subject: Re: PROBLEM:blinking screen in XFree4.x ! In-Reply-To: <20010716193301.A2161@debelian.doma.hr> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Mon, 16 Jul 2001, Marko Rebrina wrote: > Hi, > I have problem with XFree4.x(current 4.1) when I have large file transfer(~1GB) > then screen in X start blinking(black screen),console works fine! > Restarting Xe not resolving problem! No message in log ! I used to have this problem as well. It is due to massive clock skew on certain motherboads (ahem). To "fix" this, simply display DPMS in your X server: xset -dpms -jwb > > I have K7-700Mhz/AbitKA7(KX133)/256M/G400DH32M > Kernel:2.4.x,current 2.4.6 > > %cat /proc/modules > nls_iso8859-1 2880 0 (autoclean) > nls_iso8859-2 3392 1 (autoclean) > nls_cp437 4384 1 (autoclean) > vmnet 18752 0 (unused) > vmmon 19152 0 (unused) > 8139too 11936 1 > hisax 134224 5 > isdn 119984 6 [hisax] > slhc 5024 2 [isdn] > cmpci 23664 2 > > %cat /proc/ioports > 0000-001f : dma1 > 0020-003f : pic1 > 0040-005f : timer > 0060-006f : keyboard > 0080-008f : dma page reg > 00a0-00bf : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : ide1 > 01f0-01f7 : ide0 > 0376-0376 : ide1 > 0378-037a : parport0 > 03c0-03df : vga+ > 03f6-03f6 : ide0 > 03f8-03ff : serial(set) > 0778-077a : parport0 > 0cf8-0cff : PCI conf1 > 4000-40ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] > 5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] > 6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] > d000-d00f : VIA Technologies, Inc. Bus Master IDE > d000-d007 : ide0 > d008-d00f : ide1 > d400-d41f : VIA Technologies, Inc. UHCI USB > d400-d41f : usb-uhci > d800-d81f : VIA Technologies, Inc. UHCI USB (#2) > d800-d81f : usb-uhci > dc00-dcff : Realtek Semiconductor Co., Ltd. RTL-8139 > dc00-dcff : 8139too > e000-e007 : PCI device 1043:0675 (Asustek Computer, Inc.) > e400-e4ff : C-Media Electronics Inc CM8738 > e400-e4ff : cmpci > > %cat /proc/iomem > 00000000-0009fbff : System RAM > 0009fc00-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000c7fff : Video ROM > 000f0000-000fffff : System ROM > 00100000-0ffeffff : System RAM > 00100000-0023e7d3 : Kernel code > 0023e7d4-002b055f : Kernel data > 0fff0000-0fff2fff : ACPI Non-volatile Storage > 0fff3000-0fffffff : ACPI Tables > d0000000-d7ffffff : VIA Technologies, Inc. VT8371 [KX133] > d8000000-dbffffff : PCI Bus #01 > d8000000-d8003fff : Matrox Graphics, Inc. MGA G400 AGP > d9000000-d97fffff : Matrox Graphics, Inc. MGA G400 AGP > dc000000-ddffffff : PCI Bus #01 > dc000000-ddffffff : Matrox Graphics, Inc. MGA G400 AGP > de000000-de0000ff : Realtek Semiconductor Co., Ltd. RTL-8139 > de000000-de0000ff : 8139too > de001000-de0010ff : PCI device 1043:0675 (Asustek Computer, Inc.) > ffff0000-ffffffff : reserved > > %lspci -vvv > 00:00.0 Host bridge: VIA Technologies, Inc. VT8371 [KX133] (rev 02) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Capabilities: [a0] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate= > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8371 [KX133 AGP] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: d8000000-dbffffff > Prefetchable memory behind bridge: dc000000-ddffffff > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 21) > Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > > 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 > Region 4: I/O ports at d000 [size=16] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI]) > Subsystem: Unknown device 0925:1234 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, cache line size 08 > Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at d400 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI]) > Subsystem: Unknown device 0925:1234 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, cache line size 08 > Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at d800 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin ? routed to IRQ 3 > Capabilities: [68] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) > Subsystem: Realtek Semiconductor Co., Ltd. RT8139 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at dc00 [size=256] > Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable+ DSel=0 DScale=0 PME- > > 00:0b.0 Network controller: Asustek Computer, Inc.: Unknown device 0675 (rev 02) > Subsystem: Dynalink: Unknown device 1704 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 16 (4000ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at e000 [disabled] [size=8] > Region 1: Memory at de001000 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > > 00:0f.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) > Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (500ns min, 6000ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at e400 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 05) (prog-if 00 [VGA]) > Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (4000ns min, 8000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at dc000000 (32-bit, prefetchable) [size=32M] > Region 1: Memory at d8000000 (32-bit, non-prefetchable) [size=16K] > Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=8M] > Expansion ROM at [disabled] [size=64K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [f0] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1 > > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/