Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261171AbVDMRvX (ORCPT ); Wed, 13 Apr 2005 13:51:23 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261173AbVDMRvW (ORCPT ); Wed, 13 Apr 2005 13:51:22 -0400 Received: from s0003.shadowconnect.net ([213.239.201.226]:22244 "EHLO mail.shadowconnect.com") by vger.kernel.org with ESMTP id S261171AbVDMRvR (ORCPT ); Wed, 13 Apr 2005 13:51:17 -0400 Message-ID: <425D5CCE.1050703@shadowconnect.com> Date: Wed, 13 Apr 2005 19:54:22 +0200 From: Markus Lidel User-Agent: Mozilla Thunderbird 1.0.2 (Windows/20050317) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Miquel van Smoorenburg CC: linux-kernel@vger.kernel.org Subject: Re: Adaptec 2010S i2o + x86_64 doesn't work References: <20050413160352.GA12841@xs4all.net> In-Reply-To: <20050413160352.GA12841@xs4all.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1614 Lines: 51 Hello, Miquel van Smoorenburg wrote: > I have a supermicro dual xeon em64t system, X6DH8-XG2 motherboard, > 4 GB RAM, with an Adaptec zero raid 2010S i2o controller. In 32 > bits mode it runs fine, both with the dpt_i2o driver and the > generic i2o_block driver using kernel 2.6.11.6. > In 64 bits mode however the dpt_i2o driver isn't supported, so > you have to use the generic i2o layer. But that doesn't work > either - sometimes when booting the partition table is detected, > sometimes it isn't. If it isn't, then fdisk /dev/i2o/hda works > but shows an empty disk (while there definitely are partitions > present) > In both cases doing a dd if=/dev/i2o/hda of=/dev/null crashes > the system. > According to http://i2o.shadowconnect.com/ , it should work. > I've upgraded the BIOS and firmware of the mobo and controller to > the latest versions - doesn't help. Can someone suggest what to > try next ? Could you try out the 2.6.9 kernel, because i know that this one is working? Also could you send me a complete output of dmesg? Thank you very much. Best regards, Markus Lidel ------------------------------------------ Markus Lidel (Senior IT Consultant) Shadow Connect GmbH Carl-Reisch-Weg 12 D-86381 Krumbach Germany Phone: +49 82 82/99 51-0 Fax: +49 82 82/99 51-11 E-Mail: Markus.Lidel@shadowconnect.com URL: http://www.shadowconnect.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/