Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261217AbVDMXsx (ORCPT ); Wed, 13 Apr 2005 19:48:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261246AbVDMXsx (ORCPT ); Wed, 13 Apr 2005 19:48:53 -0400 Received: from ra.tuxdriver.com ([24.172.12.4]:34824 "EHLO ra.tuxdriver.com") by vger.kernel.org with ESMTP id S261217AbVDMXoy (ORCPT ); Wed, 13 Apr 2005 19:44:54 -0400 Date: Wed, 13 Apr 2005 19:38:44 -0400 From: "John W. Linville" To: linux-kernel@vger.kernel.org, netdev@oss.sgi.com Cc: jgarzik@pobox.com, davem@davemloft.net Subject: [patch 2.6.12-rc2 4/10] tg3: use TG3_FLG2_5705_PLUS instead of multi-way if's Message-ID: <04132005193844.8539@laptop> In-Reply-To: <04132005193844.8474@laptop> User-Agent: PatchPost/0.1 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2649 Lines: 60 Replace a number of three-way if statements checking for 5705, 5750, and 5752 to reference the equivalent TG3_FLG2_5705_PLUS flag instead. Signed-off-by: John W. Linville --- drivers/net/tg3.c | 16 ++++------------ 1 files changed, 4 insertions(+), 12 deletions(-) --- bcm5752-support/drivers/net/tg3.c.orig 2005-04-08 17:42:28.059553796 -0400 +++ bcm5752-support/drivers/net/tg3.c 2005-04-08 17:42:16.584131525 -0400 @@ -85,9 +85,7 @@ /* hardware minimum and maximum for a single frame's data payload */ #define TG3_MIN_MTU 60 #define TG3_MAX_MTU(tp) \ - ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 && \ - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 && \ - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752) ? 9000 : 1500) + (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ? 9000 : 1500) /* These numbers seem to be hard coded in the NIC firmware somehow. * You can't change the ring sizes, but you can change where you place @@ -863,9 +861,7 @@ out: if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) { /* Cannot do read-modify-write on 5401 */ tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20); - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752) { + } else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { u32 phy_reg; /* Set bit 14 with read-modify-write to preserve other bits */ @@ -877,9 +873,7 @@ out: /* Set phy register 0x10 bit 0 to high fifo elasticity to support * jumbo frames transmission. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752) { + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { u32 phy_reg; if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg)) @@ -8483,9 +8477,7 @@ static int __devinit tg3_test_dma(struct /* DMA read watermark not used on PCIE */ tp->dma_rwctrl |= 0x00180000; } else if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE)) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752) + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) tp->dma_rwctrl |= 0x003f0000; else tp->dma_rwctrl |= 0x003f000f; - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/