Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261988AbVDOW13 (ORCPT ); Fri, 15 Apr 2005 18:27:29 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261990AbVDOW13 (ORCPT ); Fri, 15 Apr 2005 18:27:29 -0400 Received: from smtpout.mac.com ([17.250.248.47]:58588 "EHLO smtpout.mac.com") by vger.kernel.org with ESMTP id S261988AbVDOW0r (ORCPT ); Fri, 15 Apr 2005 18:26:47 -0400 Mime-Version: 1.0 (Apple Message framework v619.2) Content-Transfer-Encoding: 7bit Message-Id: <8c5d8e66ebfcfe879244a18068544dc3@mac.com> Content-Type: text/plain; charset=US-ASCII; format=flowed To: LKML kernel From: Kyle Moffett Subject: SCSI opcode 0x80 and 3ware Escalade 7000 ATA RAID Date: Fri, 15 Apr 2005 18:26:43 -0400 X-Mailer: Apple Mail (2.619.2) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24927 Lines: 530 I've been getting the following message in syslog on a couple of my servers recently: > Apr 15 16:41:18 king kernel: scsi: unknown opcode 0x80 I've tracked it down to the SCSI opcode verification patch that went in a while back. I also determined that the trigger was our smartd/smartctl runs, which execute tests and get status on a regular basis. Our kernel is latest Debian kernel-image-2.6.8-686-smp, although I've verified identical behavior with a recent kernel.org kernel. The below strace run generates exactly 8 warnings every time. On another (unrelated) note, we also get the following messages at the rate at which our Cisco does IPv6 router-announcement broadcasts. This is on every kernel that we have, from 2.4 through 2.6. Is there something wrong with our setup, or is this just a spurious error? (NOTE: I don't know for sure that our Cisco's set up properly, we're all new at IPv6 here, and we're not actually relying on the advertising yet, so...) > Apr 15 18:01:27 king kernel: IPv6 addrconf: prefix with wrong length 49 I'll get a packet trace of necessary. Thanks for your help! Here's an example smartctl log (Without the console warnings). > # strace -o smart.trace smartctl /dev/sda -d 3ware,0 -a > smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > === START OF INFORMATION SECTION === > Device Model: Maxtor 6Y200P0 > Serial Number: Y60PVCZE > Firmware Version: YAR41BW0 > Device is: In smartctl database [for details use: -P show] > ATA Version is: 7 > ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 > Local Time is: Fri Apr 15 17:25:49 2005 EDT > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x82) Offline data collection > activity > was completed without error. > Auto Offline Data Collection: > Enabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test > has ever > been run. > Total time to complete Offline > data collection: ( 243) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline > immediate. > Auto Offline data collection > on/off support. > Suspend Offline collection > upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test > supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before > entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > No General Purpose Logging > support. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 91) minutes. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE > 3 Spin_Up_Time 0x0027 252 252 063 Pre-fail > Always - 5945 > 4 Start_Stop_Count 0x0032 253 253 000 Old_age > Always - 17 > 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail > Always - 1 > 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail > Offline - 0 > 7 Seek_Error_Rate 0x000a 253 252 000 Old_age > Always - 0 > 8 Seek_Time_Performance 0x0027 251 248 187 Pre-fail > Always - 47575 > 9 Power_On_Minutes 0x0032 220 220 000 Old_age > Always - 849h+05m > 10 Spin_Retry_Count 0x002b 252 252 157 Pre-fail > Always - 0 > 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail > Always - 0 > 12 Power_Cycle_Count 0x0032 253 253 000 Old_age > Always - 19 > 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age > Always - 0 > 193 Load_Cycle_Count 0x0032 253 253 000 Old_age > Always - 0 > 194 Temperature_Celsius 0x0032 253 253 000 Old_age > Always - 12 > 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age > Always - 5743 > 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age > Offline - 0 > 197 Current_Pending_Sector 0x0008 253 253 000 Old_age > Offline - 0 > 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age > Offline - 0 > 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age > Offline - 0 > 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age > Always - 0 > 201 Soft_Read_Error_Rate 0x000a 253 251 000 Old_age > Always - 5 > 202 TA_Increase_Count 0x000a 253 252 000 Old_age > Always - 0 > 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail > Always - 0 > 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age > Always - 0 > 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age > Always - 0 > 207 Spin_High_Current 0x002a 252 252 000 Old_age > Always - 0 > 208 Spin_Buzz 0x002a 252 252 000 Old_age > Always - 0 > 209 Offline_Seek_Performnce 0x0024 196 191 000 Old_age > Offline - 0 > 99 Unknown_Attribute 0x0004 253 253 000 Old_age > Offline - 0 > 100 Unknown_Attribute 0x0004 253 253 000 Old_age > Offline - 0 > 101 Unknown_Attribute 0x0004 253 253 000 Old_age > Offline - 0 > > SMART Error Log Version: 1 > ATA Error Count: 1 > CR = Command Register [HEX] > FR = Features Register [HEX] > SC = Sector Count Register [HEX] > SN = Sector Number Register [HEX] > CL = Cylinder Low Register [HEX] > CH = Cylinder High Register [HEX] > DH = Device/Head Register [HEX] > DC = Device Command Register [HEX] > ER = Error register [HEX] > ST = Status register [HEX] > Powered_Up_Time is measured from power on, and printed as > DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, > SS=sec, and sss=millisec. It "wraps" after 49.710 days. > > Error 1 occurred at disk power-on lifetime: 4990 hours (207 days + 22 > hours) > When the command that caused the error occurred, the device was in > an unknown state. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 03 bb bc 0c e0 Error: UNC 3 sectors at LBA = 0x000cbcbb = > 834747 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > 25 00 08 bb bc 0c e0 00 23d+08:28:01.392 READ DMA EXT > 25 00 10 83 bc 0c e0 00 23d+08:28:01.392 READ DMA EXT > 25 00 08 3b bc 0c e0 00 23d+08:28:01.392 READ DMA EXT > 25 00 08 33 bc 0c e0 00 23d+08:28:01.392 READ DMA EXT > 25 00 08 13 bc 0c e0 00 23d+08:28:01.392 READ DMA EXT > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining > LifeTime(hours) LBA_of_first_error > # 1 Short offline Completed without error 00% 11020 > - > # 2 Short offline Completed without error 00% 10997 > - > # 3 Short offline Completed without error 00% 10975 > - > # 4 Short offline Completed without error 00% 10953 > - > # 5 Short offline Completed without error 00% 10930 > - > # 6 Extended offline Completed without error 00% 10909 > - > # 7 Short offline Completed without error 00% 10885 > - > # 8 Short offline Completed without error 00% 10863 > - > # 9 Short offline Completed without error 00% 10841 > - > #10 Short offline Completed without error 00% 10818 > - > #11 Short offline Completed without error 00% 10796 > - > #12 Short offline Completed without error 00% 10774 > - > #13 Extended offline Completed without error 00% 10754 > - > #14 Short offline Completed without error 00% 10730 > - > #15 Short offline Completed without error 00% 10707 > - > #16 Short offline Completed without error 00% 10685 > - > #17 Short offline Completed without error 00% 10663 > - > #18 Short offline Completed without error 00% 10640 > - > #19 Short offline Completed without error 00% 10618 > - > #20 Extended offline Completed without error 00% 10597 > - > #21 Short offline Completed without error 00% 10573 > - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute > delay. > # cat smartctl.trace > execve("/usr/sbin/smartctl", ["smartctl", "/dev/sda", "-d", "3ware,0", > "-a"], [/* 19 vars */]) = 0 > uname({sys="Linux", node="king", ...}) = 0 > brk(0) = 0x807d000 > old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, > -1, 0) = 0x40017000 > access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or > directory) > open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or > directory) > open("/etc/ld.so.cache", O_RDONLY) = 3 > fstat64(3, {st_mode=S_IFREG|0644, st_size=23579, ...}) = 0 > old_mmap(NULL, 23579, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40018000 > close(3) = 0 > access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or > directory) > open("/lib/tls/libc.so.6", O_RDONLY) = 3 > read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360Y\1"..., > 512) = 512 > fstat64(3, {st_mode=S_IFREG|0644, st_size=1253924, ...}) = 0 > old_mmap(NULL, 1260140, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = > 0x4001e000 > old_mmap(0x40147000, 32768, PROT_READ|PROT_WRITE, > MAP_PRIVATE|MAP_FIXED, 3, 0x129000) = 0x40147000 > old_mmap(0x4014f000, 10860, PROT_READ|PROT_WRITE, > MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4014f000 > close(3) = 0 > old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, > -1, 0) = 0x40152000 > set_thread_area({entry_number:-1 -> 6, base_addr:0x401522a0, > limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, > limit_in_pages:1, seg_not_present:0, useable:1}) = 0 > munmap(0x40018000, 23579) = 0 > brk(0) = 0x807d000 > brk(0x809e000) = 0x809e000 > brk(0) = 0x809e000 > fstat64(1, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 > mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, > 0) = 0x40018000 > write(1, "smartctl version 5.32 Copyright "..., 55) = 55 > write(1, "Home page is http://smartmontool"..., 52) = 52 > open("/dev/sda", O_RDONLY|O_NONBLOCK) = 3 > ioctl(3, FIBMAP, 0xbfffe290) = 0 > write(1, "=== START OF INFORMATION SECTION"..., 37) = 37 > write(1, "Device Model: ", 18) = 18 > write(1, "Maxtor 6Y200P0\n", 15) = 15 > write(1, "Serial Number: ", 18) = 18 > write(1, "Y60PVCZE\n", 9) = 9 > write(1, "Firmware Version: ", 18) = 18 > write(1, "YAR41BW0\n", 9) = 9 > write(1, "Device is: In smartctl da"..., 66) = 66 > write(1, "ATA Version is: 7\n", 20) = 20 > write(1, "ATA Standard is: ATA/ATAPI-7 T1"..., 51) = 51 > time(NULL) = 1113600349 > open("/usr/share/zoneinfo/GMT", O_RDONLY) = 4 > fstat64(4, {st_mode=S_IFREG|0644, st_size=56, ...}) = 0 > mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, > 0) = 0x40019000 > read(4, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\0\0\1\0"..., > 4096) = 56 > close(4) = 0 > munmap(0x40019000, 4096) = 0 > open("/etc/localtime", O_RDONLY) = 4 > fstat64(4, {st_mode=S_IFREG|0644, st_size=1267, ...}) = 0 > mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, > 0) = 0x40019000 > read(4, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\0\0\0\4\0"..., > 4096) = 1267 > close(4) = 0 > munmap(0x40019000, 4096) = 0 > write(1, "Local Time is: Fri Apr 15 17:"..., 47) = 47 > write(1, "SMART support is: Available - de"..., 59) = 59 > write(1, "SMART support is: Enabled\n", 26) = 26 > write(1, "\n", 1) = 1 > ioctl(3, FIBMAP, 0xbfffe2a0) = 0 > ioctl(3, FIBMAP, 0xbfffe2a0) = 0 > ioctl(3, FIBMAP, 0xbfffe2a0) = 0 > ioctl(3, FIBMAP, 0xbfffe2a0) = 0 > write(1, "=== START OF READ SMART DATA SEC"..., 41) = 41 > write(1, "SMART overall-health self-assess"..., 57) = 57 > write(1, "\n", 1) = 1 > write(1, "General SMART Values:\n", 22) = 22 > write(1, "Offline data collection status: "..., 40) = 40 > write(1, "Offline data collection activity"..., 67) = 67 > write(1, "\t\t\t\t\tAuto Offline Data Collectio"..., 44) = 44 > write(1, "Self-test execution status: "..., 33) = 33 > write(1, "( 0)\tThe previous self-test ro"..., 53) = 53 > write(1, "without error or no self-test ha"..., 55) = 55 > write(1, "Total time to complete Offline \n", 32) = 32 > write(1, "data collection: \t\t ( 243) secon"..., 36) = 36 > write(1, "Offline data collection\n", 24) = 24 > write(1, "capabilities: \t\t\t (0x5b) ", 25) = 25 > write(1, "SMART execute Offline immediate."..., 33) = 33 > write(1, "\t\t\t\t\tAuto Offline data collectio"..., 50) = 50 > write(1, "\t\t\t\t\tSuspend Offline collection "..., 55) = 55 > write(1, "\t\t\t\t\tOffline surface scan suppor"..., 37) = 37 > write(1, "\t\t\t\t\tSelf-test supported.\n", 26) = 26 > write(1, "\t\t\t\t\tNo Conveyance Self-test sup"..., 40) = 40 > write(1, "\t\t\t\t\tSelective Self-test support"..., 36) = 36 > write(1, "SMART capabilities: ", 31) = 31 > write(1, "(0x0003)\t", 9) = 9 > write(1, "Saves SMART data before entering"..., 57) = 57 > write(1, "\t\t\t\t\tSupports SMART auto save ti"..., 37) = 37 > write(1, "Error logging capability: ", 32) = 32 > write(1, " (0x01)\tError logging supported."..., 33) = 33 > write(1, "\t\t\t\t\tNo General Purpose Logging "..., 41) = 41 > write(1, "Short self-test routine \n", 25) = 25 > write(1, "recommended polling time: \t ( "..., 44) = 44 > write(1, "Extended self-test routine\n", 27) = 27 > write(1, "recommended polling time: \t ( 9"..., 44) = 44 > write(1, "\n", 1) = 1 > write(1, "SMART Attributes Data Structure "..., 52) = 52 > write(1, "Vendor Specific SMART Attributes"..., 50) = 50 > write(1, "ID# ATTRIBUTE_NAME FLAG"..., 97) = 97 > write(1, " 3 Spin_Up_Time ", 28) = 28 > write(1, "0x0027 252 252 063 Pre-"..., 59) = 59 > write(1, "5945\n", 5) = 5 > write(1, " 4 Start_Stop_Count ", 28) = 28 > write(1, "0x0032 253 253 000 Old_"..., 59) = 59 > write(1, "17\n", 3) = 3 > write(1, " 5 Reallocated_Sector_Ct ", 28) = 28 > write(1, "0x0033 253 253 063 Pre-"..., 59) = 59 > write(1, "1\n", 2) = 2 > write(1, " 6 Read_Channel_Margin ", 28) = 28 > write(1, "0x0001 253 253 100 Pre-"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, " 7 Seek_Error_Rate ", 28) = 28 > write(1, "0x000a 253 252 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, " 8 Seek_Time_Performance ", 28) = 28 > write(1, "0x0027 251 248 187 Pre-"..., 59) = 59 > write(1, "47575\n", 6) = 6 > write(1, " 9 Power_On_Minutes ", 28) = 28 > write(1, "0x0032 220 220 000 Old_"..., 59) = 59 > write(1, "849h+05m\n", 9) = 9 > write(1, " 10 Spin_Retry_Count ", 28) = 28 > write(1, "0x002b 252 252 157 Pre-"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, " 11 Calibration_Retry_Count ", 28) = 28 > write(1, "0x002b 253 252 223 Pre-"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, " 12 Power_Cycle_Count ", 28) = 28 > write(1, "0x0032 253 253 000 Old_"..., 59) = 59 > write(1, "19\n", 3) = 3 > write(1, "192 Power-Off_Retract_Count ", 28) = 28 > write(1, "0x0032 253 253 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "193 Load_Cycle_Count ", 28) = 28 > write(1, "0x0032 253 253 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "194 Temperature_Celsius ", 28) = 28 > write(1, "0x0032 253 253 000 Old_"..., 59) = 59 > write(1, "12\n", 3) = 3 > write(1, "195 Hardware_ECC_Recovered ", 28) = 28 > write(1, "0x000a 253 252 000 Old_"..., 59) = 59 > write(1, "5743\n", 5) = 5 > write(1, "196 Reallocated_Event_Count ", 28) = 28 > write(1, "0x0008 253 253 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "197 Current_Pending_Sector ", 28) = 28 > write(1, "0x0008 253 253 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "198 Offline_Uncorrectable ", 28) = 28 > write(1, "0x0008 253 253 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "199 UDMA_CRC_Error_Count ", 28) = 28 > write(1, "0x0008 199 199 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "200 Multi_Zone_Error_Rate ", 28) = 28 > write(1, "0x000a 253 252 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "201 Soft_Read_Error_Rate ", 28) = 28 > write(1, "0x000a 253 251 000 Old_"..., 59) = 59 > write(1, "5\n", 2) = 2 > write(1, "202 TA_Increase_Count ", 28) = 28 > write(1, "0x000a 253 252 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "203 Run_Out_Cancel ", 28) = 28 > write(1, "0x000b 253 252 180 Pre-"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "204 Shock_Count_Write_Opern ", 28) = 28 > write(1, "0x000a 253 252 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "205 Shock_Rate_Write_Opern ", 28) = 28 > write(1, "0x000a 253 252 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "207 Spin_High_Current ", 28) = 28 > write(1, "0x002a 252 252 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "208 Spin_Buzz ", 28) = 28 > write(1, "0x002a 252 252 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "209 Offline_Seek_Performnce ", 28) = 28 > write(1, "0x0024 196 191 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, " 99 Unknown_Attribute ", 28) = 28 > write(1, "0x0004 253 253 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "100 Unknown_Attribute ", 28) = 28 > write(1, "0x0004 253 253 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "101 Unknown_Attribute ", 28) = 28 > write(1, "0x0004 253 253 000 Old_"..., 59) = 59 > write(1, "0\n", 2) = 2 > write(1, "\n", 1) = 1 > ioctl(3, FIBMAP, 0xbfffe290) = 0 > write(1, "SMART Error Log Version: 1\n", 27) = 27 > write(1, "ATA Error Count: 1\n", 19) = 19 > write(1, "\tCR = Command Register [HEX]\n\tFR"..., 490) = 490 > write(1, "Error 1 occurred at disk power-o"..., 77) = 77 > write(1, " When the command that caused t"..., 88) = 88 > write(1, " After command completion occur"..., 121) = 121 > write(1, " Error: UNC 3 sectors at LBA = "..., 51) = 51 > write(1, "\n\n", 2) = 2 > write(1, " Commands leading to the comman"..., 194) = 194 > write(1, " 25 00 08 bb bc 0c e0 00 23d+0"..., 58) = 58 > write(1, " 25 00 10 83 bc 0c e0 00 23d+0"..., 58) = 58 > write(1, " 25 00 08 3b bc 0c e0 00 23d+0"..., 58) = 58 > write(1, " 25 00 08 33 bc 0c e0 00 23d+0"..., 58) = 58 > write(1, " 25 00 08 13 bc 0c e0 00 23d+0"..., 58) = 58 > write(1, "\n", 1) = 1 > ioctl(3, FIBMAP, 0xbfffe2a0) = 0 > write(1, "SMART Self-test log structure re"..., 48) = 48 > write(1, "Num Test_Description Status "..., 96) = 96 > write(1, "# 1 Short offline Complet"..., 79) = 79 > write(1, "# 2 Short offline Complet"..., 79) = 79 > write(1, "# 3 Short offline Complet"..., 79) = 79 > write(1, "# 4 Short offline Complet"..., 79) = 79 > write(1, "# 5 Short offline Complet"..., 79) = 79 > write(1, "# 6 Extended offline Complet"..., 79) = 79 > write(1, "# 7 Short offline Complet"..., 79) = 79 > write(1, "# 8 Short offline Complet"..., 79) = 79 > write(1, "# 9 Short offline Complet"..., 79) = 79 > write(1, "#10 Short offline Complet"..., 79) = 79 > write(1, "#11 Short offline Complet"..., 79) = 79 > write(1, "#12 Short offline Complet"..., 79) = 79 > write(1, "#13 Extended offline Complet"..., 79) = 79 > write(1, "#14 Short offline Complet"..., 79) = 79 > write(1, "#15 Short offline Complet"..., 79) = 79 > write(1, "#16 Short offline Complet"..., 79) = 79 > write(1, "#17 Short offline Complet"..., 79) = 79 > write(1, "#18 Short offline Complet"..., 79) = 79 > write(1, "#19 Short offline Complet"..., 79) = 79 > write(1, "#20 Extended offline Complet"..., 79) = 79 > write(1, "#21 Short offline Complet"..., 79) = 79 > write(1, "\n", 1) = 1 > ioctl(3, FIBMAP, 0xbfffe290) = 0 > write(1, "SMART Selective self-test log da"..., 63) = 63 > write(1, " SPAN MIN_LBA MAX_LBA CURRENT"..., 45) = 45 > write(1, " 1 0 0 Not_tes"..., 37) = 37 > write(1, " 2 0 0 Not_tes"..., 37) = 37 > write(1, " 3 0 0 Not_tes"..., 37) = 37 > write(1, " 4 0 0 Not_tes"..., 37) = 37 > write(1, " 5 0 0 Not_tes"..., 37) = 37 > write(1, "Selective self-test flags (0x0):"..., 33) = 33 > write(1, " After scanning selected spans,"..., 69) = 69 > write(1, "If Selective self-test is pendin"..., 76) = 76 > write(1, "\n", 1) = 1 > munmap(0x40018000, 4096) = 0 > exit_group(64) = ? Cheers, Kyle Moffett -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GCM/CS/IT/U d- s++: a18 C++++>$ UB/L/X/*++++(+)>$ P+++(++++)>$ L++++(+++) E W++(+) N+++(++) o? K? w--- O? M++ V? PS+() PE+(-) Y+ PGP+++ t+(+++) 5 X R? tv-(--) b++++(++) DI+ D+ G e->++++$ h!*()>++$ r !y?(-) ------END GEEK CODE BLOCK------ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/