Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261563AbVDZPGN (ORCPT ); Tue, 26 Apr 2005 11:06:13 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261555AbVDZPGN (ORCPT ); Tue, 26 Apr 2005 11:06:13 -0400 Received: from [62.206.217.67] ([62.206.217.67]:22915 "EHLO kaber.coreworks.de") by vger.kernel.org with ESMTP id S261564AbVDZPFJ (ORCPT ); Tue, 26 Apr 2005 11:05:09 -0400 Message-ID: <426E5889.8060108@trash.net> Date: Tue, 26 Apr 2005 17:04:41 +0200 From: Patrick McHardy User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.7.6) Gecko/20050324 Debian/1.7.6-1 X-Accept-Language: en MIME-Version: 1.0 To: Andi Kleen CC: Ed Tomlinson , Alexander Nyberg , Parag Warudkar , linux-kernel@vger.kernel.org Subject: Re: X86_64: 2.6.12-rc3 spontaneous reboot References: <1114332119.916.1.camel@localhost.localdomain> <200504240903.31377.tomlins@cam.org> <426CADF1.2000100@trash.net> <20050425153541.GC16828@wotan.suse.de> <426E3C6F.6010001@trash.net> <20050426135312.GI5098@wotan.suse.de> <426E48C0.9090503@trash.net> <426E4DD2.8060808@trash.net> <20050426142252.GJ5098@wotan.suse.de> <426E5571.8000101@trash.net> <20050426145351.GD13305@wotan.suse.de> In-Reply-To: <20050426145351.GD13305@wotan.suse.de> Content-Type: multipart/mixed; boundary="------------020109020508020004050100" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13873 Lines: 302 This is a multi-part message in MIME format. --------------020109020508020004050100 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Andi Kleen wrote: > It is Checking NMI watchdog .... if you see "stuck" after that it is > broken. Or do the NMIs actually increase when you make the machine > busy (run while true ; do true ; done on each CPU)? It increases at about 1 interrupt/sec. I've attached the dmesg output from booting. --------------020109020508020004050100 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Bootdata ok (command line is root=/dev/md0 ro netconsole=4444@172.16.1.123/eth0,6666@172.16.195.3/ff:ff:ff:ff:ff:ff ) Linux version 2.6.12-rc3-2005-04-26 (kaber@kaber) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #4 Tue Apr 26 16:07:53 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff30000 (usable) BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data) BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000faac0 ACPI: XSDT (v001 A M I OEMXSDT 0x08000403 MSFT 0x00000097) @ 0x000000007ff30100 ACPI: FADT (v003 A M I OEMFACP 0x08000403 MSFT 0x00000097) @ 0x000000007ff30290 ACPI: MADT (v001 A M I OEMAPIC 0x08000403 MSFT 0x00000097) @ 0x000000007ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x08000403 MSFT 0x00000097) @ 0x000000007ff40040 ACPI: DSDT (v001 A0091 A0091006 0x00000006 MSFT 0x0100000d) @ 0x0000000000000000 On node 0 totalpages: 524080 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 519984 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 80000000:7ff80000) Checking aperture... CPU 0: aperture @ e0000000 size 256 MB Built 1 zonelists Kernel command line: root=/dev/md0 ro netconsole=4444@172.16.1.123/eth0,6666@172.16.195.3/ff:ff:ff:ff:ff:ff netconsole: local port 4444 netconsole: local IP 172.16.1.123 netconsole: interface eth0 netconsole: remote port 6666 netconsole: remote IP 172.16.195.3 netconsole: remote ethernet address ff:ff:ff:ff:ff:ff Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2002.579 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 2056404k/2096320k available (2487k kernel code, 39224k reserved, 1309k data, 152k init) Calibrating delay loop... 3923.96 BogoMIPS (lpj=1961984) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Using local APIC NMI watchdog using perfctr0 Using local APIC timer interrupts. Detected 12.516 MHz APIC timer. NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [drm] Initialized mga 3.1.0 20021029 on minor 0: Matrox Graphics, Inc. MGA G550 AGP Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler cfq registered ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 177 sk98lin: Asus mainboard with buggy VPD? Correcting data. eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State netconsole: device eth0 not up yet, forcing it netconsole: carrier detect appears untrustworthy, waiting 4 seconds eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: enabled netconsole: network logging started libata version 1.10 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 185 sata_via(0000:00:0f.0): routed to hard irq line 4 ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 185 ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 185 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f ata2: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_via Vendor: ATA Model: ST3200822AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3200822AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sda: drive cache: write back SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 mice: PS/2 mouse device common for all mice md: raid0 personality registered as nr 2 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:11.5 to 64 input: AT Translated Set 2 keyboard on isa0060/serio0 logips2pp: Detected unknown logitech mouse model 99 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] ALSA device list: #0: VIA 8237 with AD1980 at 0xc800, irq 193 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80466480(lo) IPv6 over IPv4 tunneling driver powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x2 (1500 mV) cpu_init done, current fid 0xc, vid 0x0 powernow-k8: ph2 null fid transition 0xc ACPI wakeup devices: PCI0 PS2K PS2M UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: considering sdb2 ... md: adding sdb2 ... md: adding sda2 ... md: created md0 md: bind md: bind md: running: md0: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sdb2 raid0: comparing sdb2(194378368) with sdb2(194378368) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda2 raid0: comparing sda2(194378368) with sdb2(194378368) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 388756736 blocks. raid0 : conf->hash_spacing is 388756736 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. EXT3-fs: md0: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 18105388 ext3_orphan_cleanup: deleting unreferenced inode 18105387 ext3_orphan_cleanup: deleting unreferenced inode 18105386 ext3_orphan_cleanup: deleting unreferenced inode 18104335 EXT3-fs: md0: 4 orphan inodes deleted EXT3-fs: recovery complete. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 152k freed NET: Registered protocol family 1 Adding 979924k swap on /dev/sdb1. Priority:-1 extents:1 EXT3 FS on md0, internal journal Generic RTC Driver v1.07 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 185 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: PLEXTOR DVD-ROM PX-116A2 0100, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Probing IDE interface ide1... hdc: HDS722540VLAT20, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 201, io base 0x0000dc00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 201, io base 0x0000ec00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) eth0: no IPv6 routers present uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 201, io base 0x0000c000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 201, io base 0x0000c400 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hdc: max request size: 1024KiB hdc: 80418240 sectors (41174 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 hdc2 --------------020109020508020004050100-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/