Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 19 Jul 2001 15:15:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 19 Jul 2001 15:15:39 -0400 Received: from mail.nep.net ([12.23.44.24]:52498 "HELO nep.net") by vger.kernel.org with SMTP id ; Thu, 19 Jul 2001 15:15:28 -0400 Message-ID: <19AB8F9FA07FB0409732402B4817D75A0389FF@FILESERVER.SRF.srfarms.com> From: "Ryan C. Bonham" To: "Linux Kernel List (E-mail)" Subject: Tyan Thunder K7 & 2 1.2Ghz Athlon MPs Date: Thu, 19 Jul 2001 15:24:09 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Original-Recipient: rfc822;linux-kernel-outgoing Ok, I am fairly inept when it comes to kernel and what the messages mean, I was wondering if someone would explain a few messages to me.. I just compiled the 2.4.6 kernel on a new computer with the Tyan Thunder K7 and 2 1.2Ghz AMD Athlon MP CPUs, I have 1 GB of DDRAM in this computer.. I also am trying out a Adaptec 2400A IDE Raid Card... I get the following messages, I will paste dmesg.log at the bottom if you want to see it.. mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs >From what i gather that message can just be ignored, it stems from bios vendors not following specs, and Linux is just making corrections.. Am I right? agpgart: Maximum main memory to use for agp memory: 816M agpgart: Unsupported AMD chipset (device id: 700c), you might want to try agp_try_unsupported=1. agpgart: no supported devices found. Ok, I understand the AMD chipset on this board is new, my question here is, how do I turn on agp_try_unsupported.. Patch the kernel? Thanks for the help. Ryan Dmesg.log Linux version 2.4.6 (root@PostgreSQL) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)) #2 SMP Thu Jul 19 12:37:40 EDT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000040000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 128MB HIGHMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at 000f7780 hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 262144 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32768 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: TYAN Product ID: GUINNESS APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 16 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. PAT present. PSE present. MMX present. FXSR present. Bootup CPU Processor #0 Pentium(tm) Pro APIC version 16 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. PAT present. PSE present. MMX present. FXSR present. Bus #0 is PCI Bus #1 is PCI Bus #2 is PCI Bus #3 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 3, pol 1, trig 1, bus 3, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 1, trig 1, bus 3, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 1, trig 1, bus 3, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 1, trig 1, bus 3, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 1, trig 1, bus 3, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 1, trig 1, bus 3, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 1, trig 1, bus 3, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 1, trig 1, bus 3, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 1, trig 1, bus 3, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 1, trig 1, bus 3, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 3, trig 3, bus 3, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 3, trig 3, bus 3, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 1, trig 1, bus 3, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 1, trig 1, bus 3, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 1, trig 1, bus 3, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 1, trig 1, bus 3, IRQ 0f, APIC ID 2, APIC INT 0f Int: type 0, pol 1, trig 1, bus 3, IRQ 10, APIC ID 2, APIC INT 10 Int: type 0, pol 1, trig 1, bus 3, IRQ 11, APIC ID 2, APIC INT 11 Int: type 0, pol 1, trig 1, bus 3, IRQ 12, APIC ID 2, APIC INT 12 Int: type 0, pol 1, trig 1, bus 3, IRQ 13, APIC ID 2, APIC INT 13 Int: type 0, pol 1, trig 1, bus 3, IRQ 14, APIC ID 2, APIC INT 14 Int: type 0, pol 1, trig 1, bus 3, IRQ 15, APIC ID 2, APIC INT 15 Int: type 0, pol 1, trig 1, bus 3, IRQ 16, APIC ID 2, APIC INT 16 Int: type 0, pol 1, trig 1, bus 3, IRQ 17, APIC ID 2, APIC INT 17 Lint: type 3, pol 1, trig 1, bus 3, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 1, trig 1, bus 1, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: auto BOOT_IMAGE=Server ro root=309 BOOT_FILE=/boot/bzImage Initializing CPU#0 Detected 1194.693 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2385.51 BogoMIPS Memory: 1028472k/1048576k available (1214k kernel code, 19712k reserved, 477k data, 208k init, 131072k highmem) Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 CPU0: AMD Athlon(tm) Processor stepping 01 per-CPU timeslice cutoff: 731.41 usecs. Getting VERSION: 40010 Getting VERSION: 40010 Getting ID: 1000000 Getting ID: e000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 CPU present map: 3 Booting processor 1/0 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Initializing CPU#1 CPU#1 (phys ID: 0) waiting for CALLOUT Startup point 1. Waiting for send to finish... +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 2385.51 BogoMIPS Stack at about c2119fb8 CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 OK. CPU1: AMD Athlon(tm) Processor stepping 01 CPU has booted. Before bogomips. Total of 2 processors activated (4771.02 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. Synchronizing Arb IDs. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0 not connected. ..TIMER: vector=31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 0 0 0 0 1 1 71 0a 003 03 1 1 0 1 0 1 1 79 0b 003 03 1 1 0 1 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 003 03 0 0 0 0 0 1 1 A9 11 003 03 0 0 0 0 0 1 1 B1 12 003 03 0 0 0 0 0 1 1 B9 13 003 03 0 0 0 0 0 1 1 C1 14 003 03 0 0 0 0 0 1 1 C9 15 003 03 0 0 0 0 0 1 1 D1 16 003 03 0 0 0 0 0 1 1 D9 17 003 03 0 0 0 0 0 1 1 E1 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ9 -> 9 IRQ10 -> 10 IRQ11 -> 11 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 IRQ20 -> 20 IRQ21 -> 21 IRQ22 -> 22 IRQ23 -> 23 .................................... done. calibrating APIC timer ... ..... CPU clock speed is 1194.7246 MHz. ..... host bus clock speed is 265.4936 MHz. cpu: 0, clocks: 2654936, slice: 884978 CPU0 cpu: 1, clocks: 2654936, slice: 884978 CPU1 checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfd7c0, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent querying PCI -> IRQ mapping bus:0, slot:8, pin:0. querying PCI -> IRQ mapping bus:0, slot:15, pin:0. querying PCI -> IRQ mapping bus:0, slot:16, pin:0. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 allocated 32 pages and 32 bhs reserved for the highmem bounces parport0: PC-style at 0x378 [PCSPP] parport0: cpp_daisy: aa5500ff(98) parport0: assign_addrs: aa5500ff(98) parport0: faking semi-colon parport0: Printer, Hewlett-Packard HP LaserJet 2100 Series pty: 256 Unix98 ptys configured Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A block: queued sectors max/low 683426kB/552354kB, 2048 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device 39, VID=1022, DID=7411 PCI_IDE: chipset revision 1 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: IC35L060AVER07-0, ATA DISK drive hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=7476/255/63 hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Loading I2O Core - (c) Copyright 1999 Red Hat Software Linux I2O PCI support (c) 1999 Red Hat Software. i2o: Checking for PCI I2O controllers... i2o: I2O controller on bus 0 at 65. i2o: PCI I2O controller at 0xF6000000 size=33554432 I2O: MTRR workaround for Intel i960 processor i2o/iop0: Installed at IRQ10 i2o: 1 I2O controller found and installed. Activating I2O controllers... This may take a few minutes if there are many devices i2o/iop0: LCT has 18 entries. I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:0f.0: 3Com PCI 3c980 Cyclone at 0x1400, 00:e0:81:03:29:57, IRQ 11 product code 0000 rev 00.3 date 00-00-00 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 00:0f.0: scatter/gather disabled. h/w checksums enabled 00:10.0: 3Com PCI 3c980 Cyclone at 0x1480, 00:e0:81:03:29:58, IRQ 11 product code 0000 rev 00.3 date 00-00-00 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 7809. Enabling bus-master transmits and whole-frame receives. 00:10.0: scatter/gather disabled. h/w checksums enabled Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M agpgart: Unsupported AMD chipset (device id: 700c), you might want to try agp_try_unsupported=1. agpgart: no supported devices found. [drm] Initialized tdfx 1.0.0 20000928 on minor 63 [drm:radeon_init] *ERROR* Cannot initialize agpgart module. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 208k freed Adding Swap: 265032k swap-space (priority -1) Adding Swap: 265032k swap-space (priority -2) Adding Swap: 265032k swap-space (priority -3) Adding Swap: 265032k swap-space (priority -4) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/