Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261275AbVEFVh2 (ORCPT ); Fri, 6 May 2005 17:37:28 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261274AbVEFVh1 (ORCPT ); Fri, 6 May 2005 17:37:27 -0400 Received: from quark.didntduck.org ([69.55.226.66]:18577 "EHLO quark.didntduck.org") by vger.kernel.org with ESMTP id S261276AbVEFVhA (ORCPT ); Fri, 6 May 2005 17:37:00 -0400 Message-ID: <427BE3A0.7010000@didntduck.org> Date: Fri, 06 May 2005 17:37:36 -0400 From: Brian Gerst User-Agent: Mozilla Thunderbird 1.0 (Windows/20041206) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Michael Tokarev CC: Kernel Mailing List Subject: Re: 3c509 module and 2.6 kernel: not all NICs are recognized? References: <427BD143.4010909@tls.msk.ru> <427BDD22.1080601@tls.msk.ru> In-Reply-To: <427BDD22.1080601@tls.msk.ru> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2092 Lines: 55 Michael Tokarev wrote: > A bit more information. > > Michael Tokarev wrote: > >>Finally, I tried to boot our gateway machine into 2.6 (2.6.11.8 >>to be certain) kernel. The machine is quite old, it's 100MHz >>Pentium-classic, yet it works as a router just fine. >> >>And surprizingly, this is the first machine I tried to upgrade >>to 2.6 which does not work. >> >>It have 4 3c509 cards, one EISA and 3 ISA. Here's the dmesg >>output when I load 3c509 module on 2.4 kernel: >> >>eth0: 3c5x9 at 0x2000, 10baseT port, address 00 60 08 4b 31 bf, IRQ 15. >>3c509.c:1.19 16Oct2002 becker@scyld.com >>http://www.scyld.com/network/3c509.html >>eth1: 3c5x9 at 0x3000, 10baseT port, address 00 20 af 92 f6 ef, IRQ 7. >>3c509.c:1.19 16Oct2002 becker@scyld.com >>http://www.scyld.com/network/3c509.html >>eth2: 3c5x9 at 0x4000, 10baseT port, address 00 20 af 92 83 02, IRQ 5. >>3c509.c:1.19 16Oct2002 becker@scyld.com >>http://www.scyld.com/network/3c509.html >>eth3: 3c5x9 at 0x5000, BNC port, address 00 20 af 99 f2 ac, IRQ 12. >>3c509.c:1.19 16Oct2002 becker@scyld.com >>http://www.scyld.com/network/3c509.html >> >>(the last one, with IRQ#12 and BNC port, is EISA). > > > All the ISA cards are in EISA mode (set in 3c5x9cfg.exe utility). > IRQs are assigned by the EISA bus (set by EISA configuration utility). > If any of the ISA cards are in non-EISA mode, the some of them > does not work at all, starting from EISA BIOS config during boot. > So I can't switch the cards into PNP mode. > > Also, I tried setting the cards manually with 3c509 module > parameters. The only parameter one can tweak is irq=, > but it seems the parameter is ignored -- I tried > modprobe 3c509 irq=15,7,5,12 > but it still detects only the EISA card with irq=12, just > like without irq= line at all. > > what does dmesg|grep EISA show? -- Brian Gerst - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/