Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262754AbVENMqe (ORCPT ); Sat, 14 May 2005 08:46:34 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262758AbVENMqd (ORCPT ); Sat, 14 May 2005 08:46:33 -0400 Received: from mail.donpac.ru ([80.254.111.2]:4515 "EHLO relay.rost.ru") by vger.kernel.org with ESMTP id S262754AbVENMo5 (ORCPT ); Sat, 14 May 2005 08:44:57 -0400 Subject: [PATCH 2.6.12-rc4-mm1 0/3] DMI, move ACPI boot quirk In-Reply-To: Date: Sat, 14 May 2005 16:44:55 +0400 Message-Id: <11160746954181@donpac.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII To: Andrew Morton , linux-kernel@vger.kernel.org Content-Transfer-Encoding: 7BIT From: Andrey Panin Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11717 Lines: 445 This patch moves ACPI boot quirks out of dmi_scan.c Signed-off-by: Andrey Panin arch/i386/kernel/acpi/boot.c | 219 ++++++++++++++++++++++++++++++++++++++++++- arch/i386/kernel/dmi_scan.c | 163 -------------------------------- 2 files changed, 217 insertions(+), 165 deletions(-) diff -urdpNX dontdiff linux-2.6.12-rc4-mm1.vanilla/arch/i386/kernel/acpi/boot.c linux-2.6.12-rc4-mm1/arch/i386/kernel/acpi/boot.c --- linux-2.6.12-rc4-mm1.vanilla/arch/i386/kernel/acpi/boot.c 2005-05-04 14:00:09.000000000 +0400 +++ linux-2.6.12-rc4-mm1/arch/i386/kernel/acpi/boot.c 2005-05-04 14:39:16.000000000 +0400 @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -831,6 +832,218 @@ acpi_process_madt(void) return; } +extern int acpi_force; + +#ifdef __i386__ + +#ifdef CONFIG_ACPI_PCI +static int __init disable_acpi_irq(struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n", + d->ident); + acpi_noirq_set(); + } + return 0; +} + +static int __init disable_acpi_pci(struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n", + d->ident); + acpi_disable_pci(); + } + return 0; +} +#endif + +static int __init dmi_disable_acpi(struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); + disable_acpi(); + } else { + printk(KERN_NOTICE + "Warning: DMI blacklist says broken, but acpi forced\n"); + } + return 0; +} + +/* + * Limit ACPI to CPU enumeration for HT + */ +static int __init force_acpi_ht(struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); + disable_acpi(); + acpi_ht = 1; + } else { + printk(KERN_NOTICE + "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); + } + return 0; +} + +/* + * If your system is blacklisted here, but you find that acpi=force + * works for you, please contact acpi-devel@sourceforge.net + */ +static struct dmi_system_id __initdata acpi_dmi_table[] = { + /* + * Boxes that need ACPI disabled + */ + { + .callback = dmi_disable_acpi, + .ident = "IBM Thinkpad", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), + }, + }, + + /* + * Boxes that need acpi=ht + */ + { + .callback = force_acpi_ht, + .ident = "FSC Primergy T850", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "DELL GX240", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "HP VISUALIZE NT Workstation", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "Compaq Workstation W8000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS P4B266", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4B266"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS P2B-DS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS CUR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ABIT i440BX-W83977", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ABIT "), + DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM Bladecenter", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eServer xSeries 360", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 330", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 440", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), + }, + }, + +#ifdef CONFIG_ACPI_PCI + /* + * Boxes that need ACPI PCI IRQ routing disabled + */ + { + .callback = disable_acpi_irq, + .ident = "ASUS A7V", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), + DMI_MATCH(DMI_BOARD_NAME, ""), + /* newer BIOS, Revision 1011, does work */ + DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), + }, + }, + + /* + * Boxes that need ACPI PCI IRQ routing and PCI scan disabled + */ + { /* _BBN 0 bug */ + .callback = disable_acpi_pci, + .ident = "ASUS PR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), + DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), + DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") + }, + }, + { + .callback = disable_acpi_pci, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, +#endif +}; + +#endif /* __i386__ */ + /* * acpi_boot_table_init() and acpi_boot_init() * called from setup_arch(), always. @@ -859,6 +1072,10 @@ acpi_boot_table_init(void) { int error; +#ifdef __i386__ + dmi_check_system(acpi_dmi_table); +#endif + /* * If acpi_disabled, bail out * One exception: acpi=ht continues far enough to enumerate LAPICs @@ -886,8 +1103,6 @@ acpi_boot_table_init(void) */ error = acpi_blacklisted(); if (error) { - extern int acpi_force; - if (acpi_force) { printk(KERN_WARNING PREFIX "acpi=force override\n"); } else { diff -urdpNX dontdiff linux-2.6.12-rc4-mm1.vanilla/arch/i386/kernel/dmi_scan.c linux-2.6.12-rc4-mm1/arch/i386/kernel/dmi_scan.c --- linux-2.6.12-rc4-mm1.vanilla/arch/i386/kernel/dmi_scan.c 2005-05-04 14:00:09.000000000 +0400 +++ linux-2.6.12-rc4-mm1/arch/i386/kernel/dmi_scan.c 2005-05-04 14:39:16.000000000 +0400 @@ -188,59 +188,6 @@ static __init int reset_videomode_after_ #endif -#ifdef CONFIG_ACPI_BOOT -extern int acpi_force; - -static __init __attribute__((unused)) int dmi_disable_acpi(struct dmi_blacklist *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); - disable_acpi(); - } else { - printk(KERN_NOTICE - "Warning: DMI blacklist says broken, but acpi forced\n"); - } - return 0; -} - -/* - * Limit ACPI to CPU enumeration for HT - */ -static __init __attribute__((unused)) int force_acpi_ht(struct dmi_blacklist *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); - disable_acpi(); - acpi_ht = 1; - } else { - printk(KERN_NOTICE - "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); - } - return 0; -} -#endif - -#ifdef CONFIG_ACPI_PCI -static __init int disable_acpi_irq(struct dmi_blacklist *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n", - d->ident); - acpi_noirq_set(); - } - return 0; -} -static __init int disable_acpi_pci(struct dmi_blacklist *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n", - d->ident); - acpi_disable_pci(); - } - return 0; -} -#endif - /* * Process the DMI blacklists */ @@ -264,116 +211,6 @@ static __initdata struct dmi_blacklist d } }, #endif -#ifdef CONFIG_ACPI_BOOT - /* - * If your system is blacklisted here, but you find that acpi=force - * works for you, please contact acpi-devel@sourceforge.net - */ - - /* - * Boxes that need ACPI disabled - */ - - { dmi_disable_acpi, "IBM Thinkpad", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_BOARD_NAME, "2629H1G"), - NO_MATCH, NO_MATCH }}, - - /* - * Boxes that need acpi=ht - */ - - { force_acpi_ht, "FSC Primergy T850", { - MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "DELL GX240", { - MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), - MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "HP VISUALIZE NT Workstation", { - MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "Compaq Workstation W8000", { - MATCH(DMI_SYS_VENDOR, "Compaq"), - MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "ASUS P4B266", { - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - MATCH(DMI_BOARD_NAME, "P4B266"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "ASUS P2B-DS", { - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - MATCH(DMI_BOARD_NAME, "P2B-DS"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "ASUS CUR-DLS", { - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - MATCH(DMI_BOARD_NAME, "CUR-DLS"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "ABIT i440BX-W83977", { - MATCH(DMI_BOARD_VENDOR, "ABIT "), - MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "IBM Bladecenter", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "IBM eServer xSeries 360", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "IBM eserver xSeries 330", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "IBM eserver xSeries 440", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - NO_MATCH, NO_MATCH }}, - -#endif // CONFIG_ACPI_BOOT - -#ifdef CONFIG_ACPI_PCI - /* - * Boxes that need ACPI PCI IRQ routing disabled - */ - - { disable_acpi_irq, "ASUS A7V", { - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), - MATCH(DMI_BOARD_NAME, ""), - /* newer BIOS, Revision 1011, does work */ - MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), - NO_MATCH }}, - - /* - * Boxes that need ACPI PCI IRQ routing and PCI scan disabled - */ - { disable_acpi_pci, "ASUS PR-DLS", { /* _BBN 0 bug */ - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - MATCH(DMI_BOARD_NAME, "PR-DLS"), - MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), - MATCH(DMI_BIOS_DATE, "03/21/2003") }}, - - { disable_acpi_pci, "Acer TravelMate 36x Laptop", { - MATCH(DMI_SYS_VENDOR, "Acer"), - MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), - NO_MATCH, NO_MATCH - } }, - -#endif - { NULL, } }; - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/