Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261696AbVEPPWk (ORCPT ); Mon, 16 May 2005 11:22:40 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261687AbVEPPUm (ORCPT ); Mon, 16 May 2005 11:20:42 -0400 Received: from wproxy.gmail.com ([64.233.184.197]:62569 "EHLO wproxy.gmail.com") by vger.kernel.org with ESMTP id S261696AbVEPPMI (ORCPT ); Mon, 16 May 2005 11:12:08 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:to:cc:subject:message-id:references:mime-version:content-type:content-disposition:content-transfer-encoding:in-reply-to:user-agent:from; b=nANmlIaf4fQeUf4Umq7/xMoJzGcjOeLEOVQCnbhT9+r6RvU+v+s8XX18eMOeNQQBV8HHgfUvawPUzP0FgoQfrnUHzLhBFZZI1SfVfTVZ9owaBap8MlY3JtKkSDXyXjwzdjPvVTwzgU1MyNsAAWF5JsExnX4Vpc5Mma7HK2yfTY8= Date: Mon, 16 May 2005 17:12:01 +0200 To: Jesper Juhl Cc: linux-kernel@vger.kernel.org Subject: Re: What breaks aic7xxx in post 2.6.12-rc2 ? (on amd64 ?) Message-ID: <20050516151201.GD9558@gmail.com> References: <20050516085832.GA9558@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: Mutt/1.5.6i From: =?iso-8859-1?Q?Gr=E9goire?= Favre Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6196 Lines: 125 On Mon, May 16, 2005 at 05:03:56PM +0200, Jesper Juhl wrote: > Not me, it works perfectly here, but then I have different hardware (but > using the aic7xxx driver). You are lucky, maybe I should also mention that I am under x86_64 ? Here under 2.6.12-rc2 : ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit) (scsi0:A:15): 80.000MB/s transfers (40.000MHz DT, offset 63, 16bit) Vendor: IBM Model: DDRS-39130D Rev: DC1B Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Vendor: SEAGATE Model: ST336706LW Rev: 0108 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:15:0: Tagged Queuing enabled. Depth 253 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs (scsi1:A:1): 10.000MB/s transfers (10.000MHz, offset 15) Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R08 Type: CD-ROM ANSI SCSI revision: 02 (scsi1:A:2): 10.000MB/s transfers (10.000MHz, offset 8) Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 (scsi1:A:3): 10.000MB/s transfers (10.000MHz, offset 8) Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 libata version 1.10 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 sata_via(0000:00:0f.0): routed to hard irq line 4 ata1: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD000 irq 20 ata2: SATA max UDMA/133 cmd 0xD800 ctl 0xD402 bmdma 0xD008 irq 20 ata1: no device found (phy stat 00000000) scsi2 : sata_via ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi3 : sata_via Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi0, channel 0, id 15, lun 0 SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0 sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr1 at scsi1, channel 0, id 2, lun 0 sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr2 at scsi1, channel 0, id 3, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 15, lun 0, type 0 Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0, type 5 Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0, type 5 Attached scsi generic sg4 at scsi1, channel 0, id 3, lun 0, type 5 Attached scsi generic sg5 at scsi3, channel 0, id 0, lun 0, type 0 usbmon: debugs is not available ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xcfffe900 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000bc00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. Anyone has aic7xxx working post 2.6.12-rc2 on amd64 ? Thank you very much and please keep CC to me as I am not on this ml. -- Gr?goire Favre - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/