Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261704AbVEUIV5 (ORCPT ); Sat, 21 May 2005 04:21:57 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261702AbVEUIV5 (ORCPT ); Sat, 21 May 2005 04:21:57 -0400 Received: from ZIVLNX17.UNI-MUENSTER.DE ([128.176.188.79]:3765 "EHLO ZIVLNX17.uni-muenster.de") by vger.kernel.org with ESMTP id S261704AbVEUIUS (ORCPT ); Sat, 21 May 2005 04:20:18 -0400 From: Borislav Petkov To: vgoyal@in.ibm.com Subject: Re: kexec? Date: Sat, 21 May 2005 10:20:35 +0200 User-Agent: KMail/1.7.2 Cc: maneesh@in.ibm.com, coywolf@lovecn.org, Ralf Hildebrandt , linux-kernel@vger.kernel.org, Fastboot mailing list , "Eric W. Biederman" References: <20050508202050.GB13789@charite.de> <200505180958.03570.petkov@uni-muenster.de> <20050520105259.GC3637@in.ibm.com> In-Reply-To: <20050520105259.GC3637@in.ibm.com> MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_T9ujCogujYQrMIy" Message-Id: <200505211020.35982.petkov@uni-muenster.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33582 Lines: 664 --Boundary-00=_T9ujCogujYQrMIy Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline > Second kernel did not have serial console output enabled in config file. Is > it possible to test it out once again with serial console enabled. May be > disable kgdb in first kernel. > > With --console-serial option enabled while loading panic kernel (kexec -p) > I am expecting at least following message on serial console after Sysrq-c. > > "I am in purgatory". > HI Vivek, well kgdb was the offending problem here. After disabling it and booting into the first kernel, everything worked just fine. I even got to save /proc/vmcore successfully so kdump works also :) Log attached. Regards, Boris. --Boundary-00=_T9ujCogujYQrMIy Content-Type: text/plain; charset="iso-8859-1"; name="minicom.cap" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="minicom.cap" [4294667.296000] Linux version 2.6.12-rc3-mm3 (boris@zmei) (gcc version 3.3.6 (Debian 1:3.3.6-5)) #15 SMP Sat May 21 09:31:23 CEST 2005 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000ce000 - 00000000000d60ac (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) [4294667.296000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [4294667.296000] 511MB LOWMEM available. [4294667.296000] found SMP MP-table at 000fbad0 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [4294667.296000] Processor #0 15:2 APIC version 20 [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [4294667.296000] Processor #1 15:2 APIC version 20 [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Initializing CPU#0 [4294667.296000] Kernel command line: root=/dev/hda1 vga=0 crashkernel=64M@16M console=ttyS0,115200 console=tty0 [4294667.296000] CPU 0 irqstacks, hard=c04a4000 soft=c04a2000 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [ 0.000000] Detected 2606.778 MHz processor. [ 29.152157] Using tsc for high-res timesource [ 29.153086] Console: colour VGA+ 80x25 [ 29.382716] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 29.391290] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 29.408168] Memory: 449292k/524224k available (2245k kernel code, 74444k reserved, 1259k data, 188k init, 0k highmem) [ 29.419819] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 29.488724] Calibrating delay using timer specific routine.. 5216.98 BogoMIPS (lpj=2608494) [ 29.497995] Security Framework v1.0.0 initialized [ 29.503168] Capability LSM initialized [ 29.507319] Mount-cache hash table entries: 512 [ 29.512525] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 29.518196] CPU: L2 cache: 512K [ 29.521655] CPU: Physical Processor ID: 0 [ 29.526072] Enabling fast FPU save and restore... done. [ 29.531838] Enabling unmasked SIMD FPU exception support... done. [ 29.538536] Checking 'hlt' instruction... OK. [ 29.570651] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 29.577539] Booting processor 1/1 eip 2000 [ 29.582366] CPU 1 irqstacks, hard=c04a5000 soft=c04a3000 [ 29.599008] Initializing CPU#1 [ 29.659283] Calibrating delay using timer specific routine.. 5211.17 BogoMIPS (lpj=2605585) [ 29.659309] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 29.659312] CPU: L2 cache: 512K [ 29.659314] CPU: Physical Processor ID: 0 [ 29.659419] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 29.693310] Total of 2 processors activated (10428.15 BogoMIPS). [ 29.700267] ENABLING IO-APIC IRQs [ 29.704241] ..TIMER: vector=0x31 pin1=2 pin2=-1 [ 29.820874] checking TSC synchronization across 2 CPUs: passed. [ 0.001146] softlockup thread 0 started up. [ 0.007040] Brought up 2 CPUs [ 0.007042] softlockup thread 1 started up. [ 0.016618] NET: Registered protocol family 16 [ 0.021922] ACPI: bus type pci registered [ 0.033190] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3 [ 0.040690] PCI: Using configuration type 1 [ 0.045647] mtrr: v2.0 (20020519) [ 0.055316] ACPI: Subsystem revision 20050408 [ 0.078076] ACPI: Interpreter enabled [ 0.082308] ACPI: Using IOAPIC for interrupt routing [ 0.089019] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.094679] PCI: Probing PCI hardware (bus 00) [ 0.099870] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [ 0.110827] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 0.150983] ACPI: Power Resource [URP1] (off) [ 0.156137] ACPI: Power Resource [URP2] (off) [ 0.161460] ACPI: Power Resource [FDDP] (off) [ 0.166783] ACPI: Power Resource [LPTP] (off) [ 0.173624] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.182589] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.191555] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.200633] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.209524] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.219778] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.230273] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.240761] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.249428] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.255964] pnp: PnP ACPI init [ 0.266152] pnp: PnP ACPI: found 10 devices [ 0.271406] usbcore: registered new driver usbfs [ 0.276939] usbcore: registered new driver hub [ 0.282340] PCI: Using ACPI for IRQ routing [ 0.287161] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.305977] Initializing Cryptographic API [ 0.316346] Linux agpgart interface v0.101 (c) Dave Jones [ 0.322882] agpgart: Detected an Intel 845G Chipset. [ 0.331033] agpgart: AGP aperture is 64M @ 0xe0000000 [ 0.337047] [drm] Initialized drm 1.0.0 20040925 [ 0.342362] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.351262] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE] [ 0.362502] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.373374] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.379377] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.385247] Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled [ 0.394640] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.401629] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.407853] parport: PnPBIOS parport detected. [ 0.413089] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] [ 0.420879] io scheduler noop registered [ 0.425439] io scheduler anticipatory registered [ 0.430856] io scheduler deadline registered [ 0.435905] io scheduler cfq registered [ 0.440571] 8139too Fast Ethernet driver 0.9.27 [ 0.445948] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.454614] eth0: RealTek RTL8139 at 0xe080ef00, 00:0c:6e:aa:a2:81, IRQ 17 [ 0.462567] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 0.470028] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 0.479259] ICH4: IDE controller at PCI slot 0000:00:1f.1 [ 0.485560] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.493958] ICH4: chipset revision 2 [ 0.498179] ICH4: not 100% native mode: will probe irqs later [ 0.504636] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA [ 0.513069] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 0.786131] hda: QUANTUM FIREBALLlct10 20, ATA DISK drive [ 1.047794] hdb: IC35L120AVV207-0, ATA DISK drive [ 1.105683] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.782518] hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive [ 2.043831] hdd: Maxtor 6Y160P0, ATA DISK drive [ 2.101246] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.154186] hda: max request size: 128KiB [ 4.163476] hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33) [ 4.172897] hda: cache flushes not supported [ 4.178676] hda: hda1 hda2 hda3 [ 4.188475] hdb: max request size: 1024KiB [ 4.201334] hdb: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) [ 4.211386] hdb: cache flushes supported [ 4.216465] hdb: hdb1 [ 4.224338] hdd: max request size: 1024KiB [ 4.229885] hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33) [ 4.239817] hdd: cache flushes supported [ 4.244461] hdd: hdd1 [ 4.253378] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 4.261224] Uniform CD-ROM driver Revision: 3.20 [ 7.194905] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 7.203618] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [ 7.214312] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.219537] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 7.228274] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdffffc00 [ 7.238877] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 7.248197] usb usb1: Product: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [ 7.258483] usb usb1: Manufacturer: Linux 2.6.12-rc3-mm3 ehci_hcd [ 7.265509] usb usb1: SerialNumber: 0000:00:1d.7 [ 7.270949] hub 1-0:1.0: USB hub found [ 7.275377] hub 1-0:1.0: 6 ports detected [ 7.302020] USB Universal Host Controller Interface driver v2.3 [ 7.309186] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.317966] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [ 7.329980] uhci_hcd 0000:00:1d.0: detected 2 ports [ 7.335729] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.344460] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400 [ 7.351178] usb usb2: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [ 7.362472] usb usb2: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 7.369438] usb usb2: SerialNumber: 0000:00:1d.0 [ 7.374788] hub 2-0:1.0: USB hub found [ 7.379331] hub 2-0:1.0: 2 ports detected [ 7.386800] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 7.395460] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [ 7.407457] uhci_hcd 0000:00:1d.1: detected 2 ports [ 7.413193] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 7.421953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 7.428849] usb usb3: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [ 7.440358] usb usb3: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 7.447574] usb usb3: SerialNumber: 0000:00:1d.1 [ 7.453172] hub 3-0:1.0: USB hub found [ 7.457623] hub 3-0:1.0: 2 ports detected [ 7.465583] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 7.474293] uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [ 7.486319] uhci_hcd 0000:00:1d.2: detected 2 ports [ 7.492041] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 7.500607] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 7.507507] usb usb4: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [ 7.518941] usb usb4: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 7.525906] usb usb4: SerialNumber: 0000:00:1d.2 [ 7.531466] hub 4-0:1.0: USB hub found [ 7.535913] hub 4-0:1.0: 2 ports detected [ 7.543534] mice: PS/2 mouse device common for all mice [ 7.549746] Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). [ 7.561635] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 7.589578] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 7.751269] ALSA device list: [ 7.754669] #0: Yamaha DS-XG (YMF724) at 0xdfef8000, irq 17 [ 7.761568] NET: Registered protocol family 2 [ 7.776758] IP: routing cache hash table of 2048 buckets, 32Kbytes [ 7.784381] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 7.793266] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 7.801688] TCP: Hash tables configured (established 32768 bind 32768) [ 7.809372] NET: Registered protocol family 1 [ 7.814547] NET: Registered protocol family 17 [ 7.819865] Starting balanced_irq [ 7.826744] VFS: Mounted root (ext2 filesystem) readonly. [ 7.833076] Freeing unused kernel memory: 188k freed [ 7.859710] logips2pp: Detected unknown logitech mouse model 1 [ 8.002033] input: PS/2 Logitech Mouse on isa0060/serio1 [ 11.992280] Adding 976744k swap on /dev/hda2. Priority:-1 extents:1 [ 15.049056] Real Time Clock Driver v1.12 [ 15.303095] kjournald starting. Commit interval 5 seconds [ 15.309286] EXT3 FS on hda3, internal journal [ 15.309294] EXT3-fs: mounted filesystem with ordered data mode. [ 15.337127] kjournald starting. Commit interval 5 seconds [ 15.337143] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 15.343603] EXT3 FS on hdb1, internal journal [ 15.343609] EXT3-fs: mounted filesystem with ordered data mode. [ 15.378777] kjournald starting. Commit interval 5 seconds [ 15.378794] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 15.385251] EXT3 FS on hdd1, internal journal [ 15.385257] EXT3-fs: mounted filesystem with ordered data mode. [ 17.661267] hw_random: RNG not detected [ 17.951103] Linux video capture interface: v1.00 [ 19.872678] input: PC Speaker [ 20.181694] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 202.914568] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount [ 208.817716] SysRq : Emergency Sync [ 218.157484] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount [ 222.164005] SysRq : Emergency Remount R/O [ 229.161781] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount [ 230.274406] SysRq : Trigger a crashdump I'm in purgatory Linux version 2.6.12-rc3-mm3-kdump (boris@zmei) (gcc version 3.3.6 (Debian 1:3.3.6-5)) #3 Sat May 21 09:25:41 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d60ac (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 00000000000a0000 (usable) user: 0000000001000000 - 0000000001449000 (usable) user: 00000000014e9400 - 0000000005000000 (usable) 0MB HIGHMEM available. 80MB LOWMEM available. DMI 2.3 present. Allocating PCI resources starting at 05000000 (gap: 05000000:fb000000) Built 1 zonelists Initializing CPU#0 Kernel command line: root=/dev/hda1 console=tty0 console=ttyS0,115200 init 1 memmap=exactmap memmap=640K@0K memmap=4388K@16384K memmap=60507K@21413K elfcorehdr=21412K PID hash table entries: 512 (order: 9, 8192 bytes) Detected 2606.033 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Unknown interrupt or fault at EIP 00000292 00000060 c13e59c0 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 60268k/81920k available (2853k kernel code, 5088k reserved, 1078k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5216.50 BogoMIPS (lpj=2608250) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e68) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *10), disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report audit: initializing netlink socket (disabled) audit(1116670046.359:0): initialized inotify device minor=63 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU1] (supports 8 throttling states) lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized drm 1.0.0 20040925 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered floppy0: no floppy controllers found 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI Interrupt 0000:03:0a.0[A] -> Link [LNKB] -> GSI 6 (level, low) -> IRQ 6 eth0: RealTek RTL8139 at 0xd800, 00:0c:6e:aa:a2:81, IRQ 6 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALLlct10 20, ATA DISK drive hdb: IC35L120AVV207-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive hdd: Maxtor 6Y160P0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hda3 hdb: max request size: 1024KiB hdb: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdd: max request size: 1024KiB hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33) hdd: cache flushes supported hdd: hdd1 hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugs is not available ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xdffffc00 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3 uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 3, io base 0x0000e800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000ec00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). ALSA device list: No soundcards found. oprofile: using timer interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) ip_conntrack version 2.1 (640 buckets, 5120 max) - 212 bytes per conntrack input: AT Translated Set 2 keyboard on isa0060/serio0 ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: USB1 USB2 USB3 EHCI ICHB PS2M PS2K UAR1 MC9 ACPI: (supports S0 S1 S4 S4bios S5) VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 172k freed logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse on isa0060/serio1 INIT: version 2.86 booting Mounting a tmpfs over /dev...done. Creating initial device nodes...done. Setting parameters of disc: (none). Activating swap. Adding 976744k swap on /dev/hda2. Priority:-1 extents:1 Checking root file system... fsck 1.38-WIP (09-May-2005) /: clean, 149577/1831424 files, 1195690/3662056 blocks System time was Sat May 21 08:07:38 UTC 2005. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Sat May 21 10:07:40 CEST 2005. Cleaning up ifupdown...done. Calculating module dependencies... done. Loading modules... ide-cd FATAL: Module ide_cd not found. ide-generic FATAL: Module ide_generic not found. rtc FATAL: Module rtc not found. All modules loaded. Checking all file systems... fsck 1.38-WIP (09-May-2005) /home: clean, 14509/539616 files, 341093/1078308 blocks (check after next mount) Setting kernel variables ... ... done. Mounting local filesystems... kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds /dev/hda3 on /home type ext3 (rw) /dev/hdb1 on /mnt/istorage tyEXT3 FS on hdd1, internal journal EXT3-fs: mounted filesystem with ordered data mode. pe ext3 (rw) /dev/hdd1 on /mnt/mstorage type ext3 (rw) Cleaning /tmp /var/run /var/lock. Detecting hardware: i810_rng i810_tco 8139too piix ymfpci usb_uhci ehci_hcd Skipping unavailable/built-in i810_rng module. Skipping unavailable/built-in i810_tco module. Skipping unavailable/built-in 8139too module. Skipping unavailable/built-in piix module. ymfpci disabled in configuration. Skipping unavailable/built-in uhci_hcd module. Skipping unavailable/built-in ehci_hcd module. Running 0dns-down to make sure resolv.conf is ok...done. Setting up networking...done. Cleaning up /var/run/pppX-up files that might have been left by pppstatus . Starting hotplug subsystem: pci ignoring pci display device 01:00.0 pci [success] usb usb [success] isapnp isapnp [success] ide ide [success] input input [success] scsi scsi [success] done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces...eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 done. Starting portmap daemon: portmap. Starting portmapper...Mounting remote filesystems... NFSv3 not supported! mount: wrong fs type, bad option, bad superblock on 192.168.45.67:/root/zmei, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so NFSv3 not supported! mount: wrong fs type, bad option, bad superblock on 192.168.45.67:/var/cache/apt/archives, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so Loading the saved-state of the serial devices... Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Sat May 21 10:07:48 CEST 2005 Running ntpdate to synchronize clockError : Temporary failure in name resolution . Initializing random number generator...done. Optimizing hardware... Recovering nvi editor sessions... done. Setting up X server socket directory /tmp/.X11-unix...done. Setting up ICE socket directory /tmp/.ICE-unix...done. INIT: Entering runlevel: 1 Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Entering single-user mode... Going single user INIT: Sending processes the TERM signal Give root password for maintenance (or type Control-D to continue): [root@zmei:10:08:21:~:502)-> cp /proc/vmcore . cp: overwrite `./vmcore'? y `/proc/vmcore' -> `./vmcore' [root@zmei:10:08:58:~:503)-> d total 449M drwx------ 3 root root 4.0K Oct 23 2004 Desktop -rw-r--r-- 1 root root 3.4K Mar 21 11:40 XF86Config.new -rw-r--r-- 1 root root 182 Dec 2 19:15 apt.conf drwxr-xr-x 2 root root 4.0K May 16 08:48 bin drwxr-xr-x 2 root root 4.0K May 16 08:48 cdrecord -rw-r--r-- 1 root root 180 Oct 22 2004 dbootstrap_settings -rwxr-xr-x 1 root root 149 Mar 25 14:54 fw.sh -rw-r--r-- 1 root root 1.4K Oct 22 2004 install-report.template -rw-r--r-- 1 root root 190 May 21 10:06 kexec.log -rw-r----- 1 root root 0 May 18 09:31 lock -rw-r--r-- 1 root root 107 Mar 17 12:03 minicom.log drwxr-xr-x 4 root root 4.0K Oct 22 2004 old drwxr-xr-x 2 root root 4.0K May 20 21:56 tmp -r-------- 1 root root 448M May 21 10:08 vmcore [root@zmei:10:09:03:~:504)-> mknod /dev/oldmem c 1 12 mknod: `/dev/oldmem': File exists [root@zmei:10:09:26:~:505)-> dd if=/dev/ild   oldmen m of=oldmem.001 1048456+0 records in 1048456+0 records out 536809472 bytes transferred in 28.358408 seconds (18929464 bytes/sec) [root@zmei:10:10:12:~:506)-> d total 961M drwx------ 3 root root 4.0K Oct 23 2004 Desktop -rw-r--r-- 1 root root 3.4K Mar 21 11:40 XF86Config.new -rw-r--r-- 1 root root 182 Dec 2 19:15 apt.conf drwxr-xr-x 2 root root 4.0K May 16 08:48 bin drwxr-xr-x 2 root root 4.0K May 16 08:48 cdrecord -rw-r--r-- 1 root root 180 Oct 22 2004 dbootstrap_settings -rwxr-xr-x 1 root root 149 Mar 25 14:54 fw.sh -rw-r--r-- 1 root root 1.4K Oct 22 2004 install-report.template -rw-r--r-- 1 root root 190 May 21 10:06 kexec.log -rw-r----- 1 root root 0 May 18 09:31 lock -rw-r--r-- 1 root root 107 Mar 17 12:03 minicom.log drwxr-xr-x 4 root root 4.0K Oct 22 2004 old -rw-r--r-- 1 root root 512M May 21 10:10 oldmem.001 drwxr-xr-x 2 root root 4.0K May 20 21:56 tmp -r-------- 1 root root 448M May 21 10:08 vmcore [root@zmei:10:10:17:~:508)-> reboot INIT: Switching to runlevel: 6 [root@zmei:10:10:37:~:509)-> INIT: Sending processes the TERM signal INIT: K01kdm: exit 0 1l Stopping X display manager: xdm not running (/var/run/xdm.pid not found) . Stopping periodic command scheduler: cron. Stopping apt-proxy. K20dictd: exit 0 1l Stopping DirMngr: dirmngr. Stopping MTA: exim4. Stopping internet superserver: inetd. K20postgresql: exit 0 on 1L Stopping OpenBSD Secure Shell server: sshd. Stopping Network Traffic Monitoring Programs: tleds. Stopping udftools packet writing: /dev/pktcdvd/dvdwriter=/dev/hdc FATAL: Module pktcdvd not found. Can't find pktcdvd character device ctl open: No such file or directory ERROR: Module pktcdvd does not exist in /proc/modules Stopping X font server: xfs not running (/var/run/xfs.pid not found) . Stopping Xprint servers: Xprt. Saving the System Clock time to the Hardware Clock... Hardware Clock updated to Sat May 21 10:10:46 CEST 2005. Shutting down ALSA...done. Stopping NFS common utilities: statd. Stopping NFS kernel daemon: mountd nfsd. Unexporting directories for NFS kernel daemon...done. Stopping deferred execution scheduler: atd. Stopping kernel log daemon: klogd. Stopping system log daemon: syslogd. Stopping web server: Apache2 ... no pidfile found! not running?. /etc/init.d/rc: line 30: /etc/rc6.d/K91hsf: Permission denied Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Saving random seed...done. Unmounting remote and non-toplevel virtual filesystems...done. Stopping portmap daemon: portmap. Deconfiguring network interfaces...done. Deactivating swap...umount: none busy - remounted read-only done. Unmounting local filesystems...umount: none busy - remounted read-only done. Rebooting... Restarting system. --Boundary-00=_T9ujCogujYQrMIy-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/