Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261610AbVE3PMJ (ORCPT ); Mon, 30 May 2005 11:12:09 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261495AbVE3PMJ (ORCPT ); Mon, 30 May 2005 11:12:09 -0400 Received: from wproxy.gmail.com ([64.233.184.192]:13889 "EHLO wproxy.gmail.com") by vger.kernel.org with ESMTP id S261629AbVE3PKG (ORCPT ); Mon, 30 May 2005 11:10:06 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:to:cc:subject:message-id:references:mime-version:content-type:content-disposition:content-transfer-encoding:in-reply-to:user-agent:from; b=kWDo4TWGnrRSqkCjQ6E3xmuPeYvsZzr7YoCgPteYdbIPBNUxirE9gCkrFI7mjifzep5FLaDAyA+ztCSuO6aWKk3zXANz42ncNlfIuz6r+zxuumnjf3a3D+DY1hVajCB0EdMCUybTl7FhbsECEytl+FoXB4yMhiEvnAebhlGsNBo= Date: Mon, 30 May 2005 17:09:51 +0200 To: James Bottomley Cc: dino@in.ibm.com, Andrew Morton , Linux Kernel , SCSI Mailing List Subject: Re: What breaks aic7xxx in post 2.6.12-rc2 ? Message-ID: <20050530150950.GA14351@gmail.com> References: <20050517195650.GC9121@gmail.com> <1116363971.4989.51.camel@mulgrave> <20050521232220.GD28654@gmail.com> <1116770040.5002.13.camel@mulgrave> <20050524153930.GA10911@gmail.com> <1117113563.4967.17.camel@mulgrave> <20050526143516.GA9593@gmail.com> <1117118766.4967.22.camel@mulgrave> <20050526173518.GA9132@gmail.com> <1117463938.4913.3.camel@mulgrave> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1117463938.4913.3.camel@mulgrave> User-Agent: Mutt/1.5.6i From: =?iso-8859-1?Q?Gr=E9goire?= Favre Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 16293 Lines: 341 On Mon, May 30, 2005 at 09:38:58AM -0500, James Bottomley wrote: > OK, I have two things for you to try. > > The first is the attached, which, I think, enforces the limits this > device is expecting. It's really just a sanity check to see if the > problem is what I think it is (device negotiates a transfer setting it > can't actually support). uname -r gives me : 2.6.12-rc5 which mean it's a working fix for me !!! Note that on the other controller the speed are quiete low ? Do you think it's more or less safe to use this kernel so ? Thank you very much !!! Here's dmesg : n information Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/sdc2 parport=auto video=vesafb:mtrr,ywrap,1024x800-16@75 vga=0xF07 console=ttyS0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2000.148 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x60 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1025304k/1048512k available (3138k kernel code, 22512k reserved, 1306k data, 160k init) Calibrating delay loop... 3940.35 BogoMIPS (lpj=1970176) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. testing NMI watchdog ... OK. NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ NTFS driver 2.1.22 [Flags: R/O]. EFS: 1.0a - http://aeschi.ch.eu.org/efs/ SGI XFS with large block/inode numbers, no debug enabled Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport0: PC-style at 0x378 [PCSPP(,...)] io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16 r8169: NAPI enabled eth0: Identified chip type is 'RTL8169s/8110s'. eth0: RTL8169 at 0xffffc20000002b00, 00:0c:76:bd:22:23, IRQ 16 Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC35L120AVVA07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 250 ATAPI Floppy, ATAPI FLOPPY drive hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdd: set_drive_speed_status: error=0x04 { AbortedCommand } ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 16X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide hdd: No disk in drive hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Vendor: IBM Model: DDRS-39130D Rev: DC1B Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 target0:0:0: Beginning Domain Validation WIDTH IS 1 (scsi0:A:0): 6.600MB/s transfers (16bit) target0:0:0: Domain Validation skipping write tests target0:0:0: Ending Domain Validation Vendor: SEAGATE Model: ST336706LW Rev: 0108 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:15:0: Tagged Queuing enabled. Depth 253 target0:0:15: Beginning Domain Validation WIDTH IS 1 (scsi0:A:15): 6.600MB/s transfers (16bit) target0:0:15: Ending Domain Validation scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R08 Type: CD-ROM ANSI SCSI revision: 02 target1:0:1: Beginning Domain Validation target1:0:1: Domain Validation skipping write tests target1:0:1: Ending Domain Validation Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 target1:0:2: Beginning Domain Validation target1:0:2: Domain Validation skipping write tests target1:0:2: Ending Domain Validation Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 target1:0:3: Beginning Domain Validation target1:0:3: Domain Validation skipping write tests target1:0:3: Ending Domain Validation libata version 1.10 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 sata_via(0000:00:0f.0): routed to hard irq line 4 ata1: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD000 irq 20 ata2: SATA max UDMA/133 cmd 0xD800 ctl 0xD402 bmdma 0xD008 irq 20 ata1: no device found (phy stat 00000000) scsi2 : sata_via ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi3 : sata_via Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB) SCSI device sda: drive cache: write back SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi0, channel 0, id 15, lun 0 SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0 sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr1 at scsi1, channel 0, id 2, lun 0 sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr2 at scsi1, channel 0, id 3, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 15, lun 0, type 0 Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0, type 5 Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0, type 5 Attached scsi generic sg4 at scsi1, channel 0, id 3, lun 0, type 5 Attached scsi generic sg5 at scsi3, channel 0, id 0, lun 0, type 0 usbmon: debugs is not available ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xcfffe900 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller ehci_hcd 0000:00:10.4: port 8 reset error -110 hub 1-0:1.0: hub_port_status failed (err = -32) uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000bc00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ehci_hcd 0000:00:10.4: port 8 reset error -110 hub 1-0:1.0: hub_port_status failed (err = -32) ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) usb 1-8: new high speed USB device using ehci_hcd and address 2 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd 0000:00:10.4: port 8 reset error -110 hub 1-0:1.0: hub_port_status failed (err = -32) ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) hub 1-8:1.0: USB hub found hub 1-8:1.0: 2 ports detected uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice input: PC Speaker Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.5 to 64 input: AT Translated Set 2 keyboard on isa0060/serio0 usb 1-8.1: new high speed USB device using ehci_hcd and address 3 hub 1-8.1:1.0: USB hub found hub 1-8.1:1.0: 4 ports detected logips2pp: Detected unknown logitech mouse model 99 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 ALSA device list: #0: VIA 8237 with ALC655 at 0xb800, irq 22 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) ip_tables: (C) 2000-2002 Netfilter core team usb 1-8.2: new high speed USB device using ehci_hcd and address 4 arp_tables: (C) 2002 David S. Miller Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 ACPI wakeup devices: PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD AC9 MC9 ILAN SLPB ACPI: (supports S0 S1 S3 S4 S5) ReiserFS: sdc2: found reiserfs format "3.6" with standard journal scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: SMSC Model: 223 U HS-CF Rev: 3.60 Type: Direct-Access ANSI SCSI revision: 00 Attached scsi removable disk sdd at scsi4, channel 0, id 0, lun 0 Attached scsi generic sg6 at scsi4, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete ReiserFS: sdc2: using ordered data mode ReiserFS: sdc2: journal params: device sdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdc2: checking transaction log (sdc2) ReiserFS: sdc2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 160k freed Adding 506036k swap on /dev/hda2. Priority:2 extents:1 Adding 530136k swap on /dev/sda2. Priority:2 extents:1 Adding 530104k swap on /dev/sdb1. Priority:1 extents:1 Adding 1004020k swap on /dev/sdc1. Priority:3 extents:1 XFS mounting filesystem sdb2 Ending clean XFS mount for filesystem: sdb2 XFS mounting filesystem hda4 Ending clean XFS mount for filesystem: hda4 ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names saa7146: register extension 'dvb'. ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17 saa7146: found saa7146 @ mem ffffc200004c4e00 (revision 1, irq 17) (0x13c2,0x0000). DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X). adapter has MAC addr = 00:d0:5c:00:41:90 dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: adac type set to 0 @ card 0 saa7146_vv: saa7146 (0): registered device video0 [v4l2] ves1x93: Detected ves1893a rev2 DVB: registering frontend 0 (VLSI VES1x93 DVB-S)... dvb-ttpci: found av7110-0. saa7146: register extension 'budget dvb'. saa7146: register extension 'budget_ci dvb'. ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18 saa7146: found saa7146 @ mem ffffc200005aac00 (revision 1, irq 18) (0x13c2,0x100f). DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI). adapter has MAC addr = 00:d0:5c:23:a3:9b DVB: registering frontend 1 (ST STV0299 DVB-S)... r8169: eth0: link up -- Gr?goire Favre - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/