Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261696AbVE3TMx (ORCPT ); Mon, 30 May 2005 15:12:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261703AbVE3TMx (ORCPT ); Mon, 30 May 2005 15:12:53 -0400 Received: from wproxy.gmail.com ([64.233.184.203]:64114 "EHLO wproxy.gmail.com") by vger.kernel.org with ESMTP id S261696AbVE3TH2 (ORCPT ); Mon, 30 May 2005 15:07:28 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:to:cc:subject:message-id:references:mime-version:content-type:content-disposition:content-transfer-encoding:in-reply-to:user-agent:from; b=tr7tTXLMBiTmwEPkrQLRczXH10veEwrdCyaBAT46MD7WGOJQVHLmDDtJ8GaG06vKyPsYjixdBULH90PvcxaUdVfE79f+8gvwAR4Vl6Y9Sb2rNqB4QYbban9DWvbwyOGO+5hSPtsF85fmgcRKNTbf65jiAA3r7IYmzQYOi/THXGA= Date: Mon, 30 May 2005 21:07:16 +0200 To: James Bottomley Cc: dino@in.ibm.com, Andrew Morton , Linux Kernel , SCSI Mailing List Subject: Re: What breaks aic7xxx in post 2.6.12-rc2 ? Message-ID: <20050530190716.GA9239@gmail.com> References: <20050524153930.GA10911@gmail.com> <1117113563.4967.17.camel@mulgrave> <20050526143516.GA9593@gmail.com> <1117118766.4967.22.camel@mulgrave> <20050526173518.GA9132@gmail.com> <1117463938.4913.3.camel@mulgrave> <20050530150950.GA14351@gmail.com> <1117467248.4913.9.camel@mulgrave> <20050530160147.GD14351@gmail.com> <1117477040.4913.12.camel@mulgrave> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1117477040.4913.12.camel@mulgrave> User-Agent: Mutt/1.5.6i From: =?iso-8859-1?Q?Gr=E9goire?= Favre Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17044 Lines: 703 On Mon, May 30, 2005 at 01:17:20PM -0500, James Bottomley wrote: > Well that's good ... it proves the theory that if the DV were correctly > limited initially, everything would work. OK :-) > However ... lets see if we can get it to work properly even with the > initial mismatch. Reverse the previous patch, apply this one and try > rebooting ... Unfortunately it don't work : Bootdata ok (command line is root=/dev/sdc2 parport=auto video=vesafb:mtrr,ywrap,1024x800-16@75 vga=0xF07 console=ttyS0) Linux version 2.6.12-rc5 (root@gregoire) (gcc version 3.4.3 20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #3 Mon May 30 20:38:57 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/sdc2 parport=auto video=vesafb:mtrr,ywrap,1024x800-16@75 vga=0xF07 console=ttyS0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2000.148 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x60 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1025304k/1048512k available (3138k kernel code, 22512k reserved, 1306k data, 160k init) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. testing NMI watchdog ... OK. NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ NTFS driver 2.1.22 [Flags: R/O]. EFS: 1.0a - http://aeschi.ch.eu.org/efs/ SGI XFS with large block/inode numbers, no debug enabled Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport0: PC-style at 0x378 [PCSPP(,...)] io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16 r8169: NAPI enabled eth0: RTL8169 at 0xffffc20000002b00, 00:0c:76:bd:22:23, IRQ 16 Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hda: IC35L120AVVA07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 250 ATAPI Floppy, ATAPI FLOPPY drive hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdd: set_drive_speed_status: error=0x04 { AbortedCommand } ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 16X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide hdd: No disk in drive hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Vendor: IBM Model: DDRS-39130D Rev: DC1B Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 target0:0:0: Beginning Domain Validation WIDTH IS 1 (scsi0:A:0): 6.600MB/s transfers (16bit) target0:0:0: Domain Validation skipping write tests (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit) target0:0:0: Ending Domain Validation Vendor: SEAGATE Model: ST336706LW Rev: 0108 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:15:0: Tagged Queuing enabled. Depth 253 target0:0:15: Beginning Domain Validation WIDTH IS 1 (scsi0:A:15): 6.600MB/s transfers (16bit) (scsi0:A:15): 80.000MB/s transfers (40.000MHz, offset 63, 16bit) target0:0:15: Ending Domain Validation scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs scsi1:0:0:0: Attempting to queue an ABORT message CDB: 0x12 0x0 0x0 0x0 0x24 0x0 scsi1: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi1: Dumping Card State while idle, at SEQADDR 0x18 Card was paused ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x0 SCSISIGI[0x44] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x1a] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x5] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4] SXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d] STACK: 0x0 0x0 0x192 0x17 SCB count = 4 Kernel NEXTQSCB = 2 Card NEXTQSCB = 2 QINFIFO entries: Waiting Queue entries: 0:3 Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Sequencer SCB Info: 0 SCB_CONTROL[0x50] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0x3] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Pending list: 3 SCB_CONTROL[0x50] SCB_SCSIID[0x7] SCB_LUN[0x0] Kernel Free SCB list: 1 0 Untagged Q(0): 3 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi1:0:0:0: Cmd aborted from QINFIFO aic7xxx_abort returns 0x2002 scsi1:0:0:0: Attempting to queue an ABORT message CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi1: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi1: Dumping Card State while idle, at SEQADDR 0x18 Card was paused ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x0 SCSISIGI[0x44] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x1a] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x5] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4] SXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d] STACK: 0x0 0x0 0x192 0x17 SCB count = 4 Kernel NEXTQSCB = 3 Card NEXTQSCB = 2 QINFIFO entries: 2 Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Sequencer SCB Info: 0 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Pending list: 2 SCB_CONTROL[0x50] SCB_SCSIID[0x7] SCB_LUN[0x0] Kernel Free SCB list: 1 0 Untagged Q(0): 2 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi1:0:0:0: Cmd aborted from QINFIFO aic7xxx_abort returns 0x2002 scsi1:0:0:0: Attempting to queue a TARGET RESET message CDB: 0x12 0x0 0x0 0x0 0x24 0x0 scsi1:0:0:0: Command not found aic7xxx_dev_reset returns 0x2002 scsi1:0:0:0: Attempting to queue an ABORT message CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi1: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi1: Dumping Card State while idle, at SEQADDR 0x18 Card was paused ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x0 SCSISIGI[0x44] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x1a] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x5] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4] SXFRCTL0[0x80] DFCNTRL[0x4] DFSTATUS[0x6d] STACK: 0x0 0x0 0x192 0x17 SCB count = 4 Kernel NEXTQSCB = 2 Card NEXTQSCB = 3 QINFIFO entries: 3 Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Sequencer SCB Info: 0 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Pending list: 3 SCB_CONTROL[0x50] SCB_SCSIID[0x7] SCB_LUN[0x0] Kernel Free SCB list: 1 0 Untagged Q(0): 3 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi1:0:0:0: Cmd aborted from QINFIFO aic7xxx_abort returns 0x2002 scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0 Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R08 Type: CD-ROM ANSI SCSI revision: 02 target1:0:1: Beginning Domain Validation target1:0:1: Domain Validation skipping write tests (scsi1:A:1): 20.000MB/s transfers (20.000MHz, offset 15) scsi1:0:1:0: Attempting to queue an ABORT message CDB: 0x12 0x0 0x0 0x0 0x60 0x0 scsi1: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi1: Dumping Card State in Data-in phase, at SEQADDR 0x7b Card was paused ACCUM = 0x0, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0x0 HCNT = 0x60 SCBPTR = 0x0 SCSISIGI[0x44] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x40] SCSISEQ[0x12] SBLKCTL[0x0] SCSIRATE[0xf] SEQCTL[0x10] SEQ_FLAGS[0x20] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa0] DFCNTRL[0x38] DFSTATUS[0x40] STACK: 0x0 0x162 0x192 0x6e SCB count = 4 Kernel NEXTQSCB = 2 Card NEXTQSCB = 2 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Sequencer SCB Info: 0 SCB_CONTROL[0x48] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0x3] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Pending list: 3 SCB_CONTROL[0x48] SCB_SCSIID[0x17] SCB_LUN[0x0] Kernel Free SCB list: 1 0 Untagged Q(1): 3 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi1:0:1:0: Device is active, asserting ATN R... Thank, -- Gr?goire Favre - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/