Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030321AbVIITbJ (ORCPT ); Fri, 9 Sep 2005 15:31:09 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030326AbVIITbI (ORCPT ); Fri, 9 Sep 2005 15:31:08 -0400 Received: from magic.adaptec.com ([216.52.22.17]:36036 "EHLO magic.adaptec.com") by vger.kernel.org with ESMTP id S1030324AbVIITbF (ORCPT ); Fri, 9 Sep 2005 15:31:05 -0400 Message-ID: <4321E2F3.7030401@adaptec.com> Date: Fri, 09 Sep 2005 15:30:59 -0400 From: Luben Tuikov User-Agent: Mozilla Thunderbird 1.0.6 (X11/20050716) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Linux Kernel Mailing List , SCSI Mailing List Subject: [ANNOUNCE 2/2] Serial Attached SCSI (SAS) support for the Linux kernel Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 09 Sep 2005 19:31:04.0212 (UTC) FILETIME=[048DA540:01C5B575] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29386 Lines: 746 Using the User Space Expander configuration utility =================================================== The file "expander_conf.c" is a user space program which uses the "smp_portal" SMP portal to communicate with expanders in the domain. It gives you complete control of the expander you're talking to, so please be careful if you're changing route tables, phy settings, etc. The "expander_conf.c" file is located here: drivers/scsi/sas-class/expander_conf.c How it works can be found in drivers/scsi/sas-class/README, and of course in the source code. Here we show complete information about the three expanders we saw in the previous email. Dumping configuration info for Expander A ----------------------------------------- A) As you can see phys 11, 10, 9 and 8 of this expander are connected to phys 4, 5, 7, and 6 of the Host Adapter, thus forming a wide port. This is also the subtractive boundary of this edge expander device set and of this expander. B) As you can see phys 7 and 6 of this expander are connected to phys 8 and 9 of expander B, thus forming a wide port. They use table routing attributes. C) The routing table is also printed for phys 7 and 6. It is of course identical. D) End devices attached are clearly identifiable. #expander_conf /sys/devices/pci0000\:01/0000\:01\:04.0/host11/sas/ha/ports/1/domain/50001c1716010600/smp_portal Vendor: VITESSE Product: VSC7160 Eval Brd Revision: 4 Component: VITESSE Component ID: 29024 Component revision: 4 Expander Change Count: 12 Expander Route Indexes: 160 Number of phys: 13 Configuring: No Configurable route table: Yes Enclosure Logical Identifier: 00000000000000000000 Phy00:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3221225471 RD error count: 4294958971 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy01:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3706272315 RD error count: 2079374150 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy02:D attached: 50001c1716010603:00 chg count:05 Attached device: SATA device Link rate: G1 (1,5 Gb/s) Tproto: STP Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 4216795329 RD error count: 4277909111 DW sync loss count: 0 Reset problem count: 0 Phy03:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 828522753 RD error count: 27724688 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy04:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy05:D attached: 5000c50000513329:01 chg count:01 Attached device: end device Link rate: G2 (3 GB/s) Tproto: SSP Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 4292849663 RD error count: 4261371839 DW sync loss count: 0 Reset problem count: 0 Phy06:T attached: 50001c1071609c00:09 chg count:01 Attached device: edge expander Link rate: G2 (3 GB/s) Tproto: SMP Iproto: SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3585802240 RD error count: 3870195680 DW sync loss count: 0 Reset problem count: 0 Routing Table 00 enabled 5000c50000102a65 01 enabled 50001c1071609c02 02 enabled 5005076a000001e0 03 enabled 5000c50000513385 04 enabled 5c50000000409c11 05 enabled 5005076a000001ed Phy07:T attached: 50001c1071609c00:08 chg count:01 Attached device: edge expander Link rate: G2 (3 GB/s) Tproto: SMP Iproto: SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3229920258 RD error count: 1111358524 DW sync loss count: 0 Reset problem count: 0 Routing Table 00 enabled 5000c50000102a65 01 enabled 50001c1071609c02 02 enabled 5005076a000001e0 03 enabled 5000c50000513385 04 enabled 5c50000000409c11 05 enabled 5005076a000001ed Phy08:S attached: 50000d1000281260:06 chg count:01 Attached device: end device Link rate: G2 (3 GB/s) Tproto: Iproto: SSP|STP|SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 4154908636 RD error count: 2808853200 DW sync loss count: 0 Reset problem count: 0 Phy09:S attached: 50000d1000281260:07 chg count:01 Attached device: end device Link rate: G2 (3 GB/s) Tproto: Iproto: SSP|STP|SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 371055385 RD error count: 3645431138 DW sync loss count: 0 Reset problem count: 0 Phy10:S attached: 50000d1000281260:05 chg count:01 Attached device: end device Link rate: G2 (3 GB/s) Tproto: Iproto: SSP|STP|SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3790805948 RD error count: 2017124313 DW sync loss count: 0 Reset problem count: 0 Phy11:S attached: 50000d1000281260:04 chg count:01 Attached device: end device Link rate: G2 (3 GB/s) Tproto: Iproto: SSP|STP|SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Phy12:D attached: 50001c171601060d:00 chg count:00 Attached device: end device Link rate: G2 (3 GB/s) Tproto: SSP Iproto: SSP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Virtual phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Dumping configuration info for Expander B ----------------------------------------- A) As you can see phys 9 and 8 of this expander are connected to phys 6 and 7 of Expander A as we already noted above. This forms the subtractive boundary of this expander. B) As you can see phys 3 and 2 of this expander are connected to phys 7 and 3 of Expander C, thus forming a wide port. They use the table routing attribute. C) The routing table of phys 3 and 2 is also printed. It is of course identical. D) End devices attached are clearly identifiable. expander_conf /sys/devices/pci0000\:01/0000\:01\:04.0/host11/sas/ha/ports/1/domain/50001c1716010600/50001c1071609c00/smp_portal Vendor: VITESSE Product: VSC7160 Eval Brd Revision: 4 Component: VITESSE Component ID: 29024 Component revision: 4 Expander Change Count: 6 Expander Route Indexes: 160 Number of phys: 12 Configuring: No Configurable route table: Yes Enclosure Logical Identifier: 00000000000000000000 Phy00:D attached: 5000c50000102a65:00 chg count:01 Attached device: end device Link rate: G2 (3 GB/s) Tproto: SSP Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 2351827995 RD error count: 3908042718 DW sync loss count: 0 Reset problem count: 0 Phy01:D attached: 50001c1071609c02:00 chg count:01 Attached device: SATA device Link rate: G1 (1,5 Gb/s) Tproto: STP Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Phy02:T attached: 5005076a000001e0:03 chg count:01 Attached device: edge expander Link rate: G2 (3 GB/s) Tproto: SMP Iproto: SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 1939984985 RD error count: 2207511641 DW sync loss count: 0 Reset problem count: 0 Routing Table 00 enabled 5000c50000513385 01 enabled 5c50000000409c11 02 enabled 5005076a000001ed Phy03:T attached: 5005076a000001e0:07 chg count:01 Attached device: edge expander Link rate: G2 (3 GB/s) Tproto: SMP Iproto: SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 2343129041 RD error count: 3405770672 DW sync loss count: 0 Reset problem count: 0 Routing Table 00 enabled 5000c50000513385 01 enabled 5c50000000409c11 02 enabled 5005076a000001ed Phy04:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy05:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy06:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3216754055 RD error count: 4159684279 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy07:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3687816959 RD error count: 4261377627 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy08:S attached: 50001c1716010600:07 chg count:01 Attached device: edge expander Link rate: G2 (3 GB/s) Tproto: SMP Iproto: SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 790459193 RD error count: 3202994802 DW sync loss count: 0 Reset problem count: 0 Phy09:S attached: 50001c1716010600:06 chg count:01 Attached device: edge expander Link rate: G2 (3 GB/s) Tproto: SMP Iproto: SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Phy10:S attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3888053628 RD error count: 3011959286 DW sync loss count: 0 Reset problem count: 0 Phy11:S attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 222822400 RD error count: 246415626 DW sync loss count: 0 Reset problem count: 0 Dumping configuration info for Expander C ----------------------------------------- A) As you can see phys 7 and 3 of this expander are connected to phys 3 and 2 of Expander B, thus forming a wide port. This forms the subtractive boundary of this expander. B) End devices attached are clearly identifiable. expander_conf /sys/devices/pci0000\:01/0000\:01\:04.0/host11/sas/ha/ports/1/domain/50001c1716010600/50001c1071609c00/5005076a000001e0/smp_portal Vendor: VITESSE Product: VSC7160 Eval Brd Revision: 4 Component: VITESSE Component ID: 29024 Component revision: 3 Expander Change Count: 4 Expander Route Indexes: 160 Number of phys: 13 Configuring: No Configurable route table: Yes Enclosure Logical Identifier: 00000000000000000000 Phy00:D attached: 5000c50000513385:01 chg count:01 Attached device: end device Link rate: G2 (3 GB/s) Tproto: SSP Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Phy01:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy02:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 2147352567 RD error count: 4294964735 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy03:S attached: 50001c1071609c00:02 chg count:01 Attached device: edge expander Link rate: G2 (3 GB/s) Tproto: SMP Iproto: SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Phy04:S attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 1558851767 RD error count: 2009595383 DW sync loss count: 0 Reset problem count: 0 Phy05:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 4277141467 RD error count: 4223134719 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy06:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 2147483647 RD error count: 4026499071 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy07:S attached: 50001c1071609c00:03 chg count:01 Attached device: edge expander Link rate: G2 (3 GB/s) Tproto: SMP Iproto: SMP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3243694232 RD error count: 749555105 DW sync loss count: 0 Reset problem count: 0 Phy08:S attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Phy09:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 4091248127 RD error count: 2936004581 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy10:T attached: 0000000000000000:00 chg count:00 Attached device: none Link rate: unknown Tproto: Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 3758030847 RD error count: 4294963183 DW sync loss count: 0 Reset problem count: 0 Routing Table Empty (all zero) Phy11:D attached: 5c50000000409c11:00 chg count:01 Attached device: end device Link rate: G2 (3 GB/s) Tproto: SSP Iproto: Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Physical phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 Phy12:D attached: 5005076a000001ed:00 chg count:00 Attached device: end device Link rate: G2 (3 GB/s) Tproto: SSP Iproto: SSP Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s) Virtual phy Partial pathway timeout value: 7 microseconds Connector type: No information Connector element index: 0 Connector physical link: 0 Invalid DW count: 0 RD error count: 0 DW sync loss count: 0 Reset problem count: 0 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/