Message-ID: <4321E41F.20900@adaptec.com>
Date: Fri, 09 Sep 2005 15:35:59 -0400
From: Luben Tuikov <luben_tuikov@adaptec.com>
User-Agent: Mozilla Thunderbird 1.0.6 (X11/20050716)
MIME-Version: 1.0
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
       SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: [PATCH 2.6.13 15/20] aic94xx: aic94x_sds.c Shared Data Structures
 and memory
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 26434
Lines: 976

Signed-off-by: Luben Tuikov <luben_tuikov@adaptec.com>

diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/drivers/scsi/aic94xx/aic94xx_sds.c linux-2.6.13/drivers/scsi/aic94xx/aic94xx_sds.c
--- linux-2.6.13-orig/drivers/scsi/aic94xx/aic94xx_sds.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/drivers/scsi/aic94xx/aic94xx_sds.c	2005-09-09 11:21:23.000000000 -0400
@@ -0,0 +1,964 @@
+/*
+ * Aic94xx SAS/SATA driver access to shared data structures and memory
+ * maps.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ * 
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_sds.c#34 $
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+
+/* ---------- OCM stuff ---------- */
+
+struct asd_ocm_dir_ent {
+	u8 type;
+	u8 offs[3];
+	u8 _r1;
+	u8 size[3];
+} __attribute__ ((packed));
+
+struct asd_ocm_dir {
+	char sig[2];
+	u8   _r1[2];
+	u8   major;          /* 0 */
+	u8   minor;          /* 0 */
+	u8   _r2;
+	u8   num_de;
+	struct asd_ocm_dir_ent entry[15];
+} __attribute__ ((packed));
+
+struct asd_bios_chim_struct {
+	char sig[4];
+	u8   major;          /* 1 */
+	u8   minor;          /* 0 */
+	u8   bios_major;
+	u8   bios_minor;
+	__le32  bios_build;
+	u8   flags;
+	u8   pci_slot;
+	__le16  ue_num;
+	__le16  ue_size;
+	u8  _r[14];
+	/* The unit element array is right here.
+	 */
+} __attribute__ ((packed));
+
+/**
+ * asd_read_ocm_seg - read an on chip memory (OCM) segment
+ * @asd_ha: pointer to the host adapter structure
+ * @buffer: where to write the read data
+ * @offs: offset into OCM where to read from
+ * @size: how many bytes to read
+ *
+ * Return the number of bytes not read. Return 0 on success.
+ */
+static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
+			    u32 offs, int size)
+{
+	u8 *p = buffer;
+	if (unlikely(asd_ha->iospace))
+		asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
+	else {
+		for ( ; size > 0; size--, offs++, p++)
+			*p = asd_read_ocm_byte(asd_ha, offs);
+	}
+	return size;
+}
+
+static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha,
+			    struct asd_ocm_dir *dir, u32 offs)
+{
+	int err = asd_read_ocm_seg(asd_ha, (void *)dir, offs, sizeof(*dir));
+	if (err) {
+		ASD_DPRINTK("couldn't read ocm segment\n");
+		return err;
+	}
+	if (dir->sig[0] != 'M' || dir->sig[1] != 'O') {
+		ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n",
+			    dir->sig[0], dir->sig[1]);
+		return -ENOENT;
+	}
+	if (dir->major != 0) {
+		asd_printk("unsupported major version of ocm dir:0x%x\n",
+			   dir->major);
+		return -ENOENT;
+	}
+	dir->num_de &= 0xf;
+	return 0;
+}
+
+#define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16))
+
+static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type,
+			      u32 *offs, u32 *size)
+{
+	int i;
+	struct asd_ocm_dir_ent *ent;
+
+	for (i = 0; i < dir->num_de; i++) {
+		if (dir->entry[i].type == type)
+			break;
+	}
+	if (i >= dir->num_de)
+		return -ENOENT;
+	ent = &dir->entry[i];
+	*offs = (u32) THREE_TO_NUM(ent->offs);
+	*size = (u32) THREE_TO_NUM(ent->size);
+	return 0;
+}
+
+#define OCM_BIOS_CHIM_DE  2
+#define BC_BIOS_PRESENT   1
+
+static int asd_get_bios_chim(struct asd_ha_struct *asd_ha,
+			     struct asd_ocm_dir *dir)
+{
+	int err;
+	struct asd_bios_chim_struct *bc_struct;
+	u32 offs, size;
+
+	err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size);
+	if (err) {
+		ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n");
+		goto out;
+	}
+	err = -ENOMEM;
+	bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL);
+	if (!bc_struct) {
+		asd_printk("no memory for bios_chim struct\n");
+		goto out;
+	}
+	err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs,
+			       sizeof(*bc_struct));
+	if (err) {
+		ASD_DPRINTK("couldn't read ocm segment\n");
+		goto out2;
+	}
+	if (strncmp(bc_struct->sig, "SOIB", 4)
+	    && strncmp(bc_struct->sig, "IPSA", 4)) {
+		ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n",
+			    bc_struct->sig[0], bc_struct->sig[1],
+			    bc_struct->sig[2], bc_struct->sig[3]);
+		err = -ENOENT;
+		goto out2;
+	}
+	if (bc_struct->major != 1) {
+		asd_printk("BIOS_CHIM unsupported major version:0x%x\n",
+			   bc_struct->major);
+		err = -ENOENT;
+		goto out2;
+	}
+	if (bc_struct->flags & BC_BIOS_PRESENT) {
+		asd_ha->hw_prof.bios.present = 1;
+		asd_ha->hw_prof.bios.maj = bc_struct->bios_major;
+		asd_ha->hw_prof.bios.min = bc_struct->bios_minor;
+		asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build);
+		ASD_DPRINTK("BIOS present (%d,%d), %d\n",
+			    asd_ha->hw_prof.bios.maj,
+			    asd_ha->hw_prof.bios.min,
+			    asd_ha->hw_prof.bios.bld);
+	}
+	asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num);
+	asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size);
+	ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num,
+		    asd_ha->hw_prof.ue.size);
+	size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size;
+	if (size > 0) {
+		err = -ENOMEM;
+		asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL);
+		if (!asd_ha->hw_prof.ue.area)
+			goto out2;
+		err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area,
+				       offs + sizeof(*bc_struct), size);
+		if (err) {
+			kfree(asd_ha->hw_prof.ue.area);
+			asd_ha->hw_prof.ue.area = NULL;
+			asd_ha->hw_prof.ue.num  = 0;
+			asd_ha->hw_prof.ue.size = 0;
+			ASD_DPRINTK("couldn't read ue entries(%d)\n", err);
+		}
+	}
+out2:
+	kfree(bc_struct);
+out:
+	return err;
+}
+
+/**
+ * asd_read_ocm - read on chip memory (OCM)
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_ocm(struct asd_ha_struct *asd_ha)
+{
+	int err;
+	struct asd_ocm_dir *dir;
+	
+	dir = kmalloc(sizeof(*dir), GFP_KERNEL);
+	if (!dir) {
+		asd_printk("no memory for ocm dir\n");
+		return -ENOMEM;
+	}
+	
+	err = asd_read_ocm_dir(asd_ha, dir, 0);
+	if (err)
+		goto out;
+
+	err = asd_get_bios_chim(asd_ha, dir);
+out:
+	kfree(dir);
+	return err;
+}
+
+/* ---------- FLASH stuff ---------- */
+
+#define FLASH_RESET			0xF0
+#define FLASH_MANUF_AMD                 1
+
+#define FLASH_SIZE                      0x200000
+#define FLASH_DIR_COOKIE                "*** ADAPTEC FLASH DIRECTORY *** "
+#define FLASH_NEXT_ENTRY_OFFS		0x2000
+#define FLASH_MAX_DIR_ENTRIES		32
+
+#define FLASH_DE_TYPE_MASK              0x3FFFFFFF
+#define FLASH_DE_MS                     0x120
+#define FLASH_DE_CTRL_A_USER            0xE0
+
+struct asd_flash_de {
+	__le32   type;
+	__le32   offs;
+	__le32   pad_size;
+	__le32   image_size;
+	__le32   chksum;
+	u8       _r[12];
+	u8       version[32];
+} __attribute__ ((packed));
+
+struct asd_flash_dir {
+	u8    cookie[32];
+	__le32   rev;		  /* 2 */
+	__le32   chksum;
+	__le32   chksum_antidote;
+	__le32   bld;
+	u8    bld_id[32];	  /* build id data */
+	u8    ver_data[32];	  /* date and time of build */
+	__le32   ae_mask;
+	__le32   v_mask;
+	__le32   oc_mask;
+	u8    _r[20];
+	struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES];
+} __attribute__ ((packed));
+
+struct asd_manuf_sec {
+	char  sig[2];		  /* 'S', 'M' */
+	u16   offs_next;
+	u8    maj;           /* 0 */
+	u8    min;           /* 0 */
+	u16   chksum;
+	u16   size;
+	u8    _r[6];
+	u8    sas_addr[SAS_ADDR_SIZE];
+	u8    pcba_sn[ASD_PCBA_SN_SIZE];
+	/* Here start the other segments */
+	u8    linked_list[0];
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_desc {
+	u8    state;         /* low 4 bits */
+#define MS_PHY_STATE_ENABLEABLE 0
+#define MS_PHY_STATE_REPORTED   1
+#define MS_PHY_STATE_HIDDEN     2
+	u8    phy_id;
+	u16   _r;
+	u8    phy_control_0; /* mode 5 reg 0x160 */
+	u8    phy_control_1; /* mode 5 reg 0x161 */
+	u8    phy_control_2; /* mode 5 reg 0x162 */
+	u8    phy_control_3; /* mode 5 reg 0x163 */
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_param {
+	char  sig[2];		  /* 'P', 'M' */
+	u16   next;
+	u8    maj;           /* 0 */
+	u8    min;           /* 2 */
+	u8    num_phy_desc;  /* 8 */
+	u8    phy_desc_size; /* 8 */
+	u8    _r[3];
+	u8    usage_model_id;
+	u32   _r2;
+	struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_sb_type[] = {
+	"unknown",
+	"SGPIO",
+	[2 ... 0x7F] = "unknown",
+	[0x80] = "ADPT_I2C",
+	[0x81 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+#endif
+
+struct asd_ms_sb_desc {
+	u8    type;
+	u8    node_desc_index;
+	u8    conn_desc_index;
+	u8    _recvd[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_conn_type[] = {
+	[0 ... 7] = "unknown",
+	"SFF8470",
+	"SFF8482",
+	"SFF8484",
+	[0x80] = "PCIX_DAUGHTER0",
+	[0x81] = "SAS_DAUGHTER0",
+	[0x82 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+
+static const char *asd_conn_location[] = {
+	"unknown",
+	"internal",
+	"external",
+	"board_to_board",
+};
+#endif
+
+struct asd_ms_conn_desc {
+	u8    type;
+	u8    location;
+	u8    num_sideband_desc;
+	u8    size_sideband_desc;
+	u32   _resvd;
+	u8    name[16];
+	struct asd_ms_sb_desc sb_desc[0];
+} __attribute__ ((packed));
+
+struct asd_nd_phy_desc {
+	u8    vp_attch_type;
+	u8    attch_specific[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_node_type[] = {
+	"IOP",
+	"IO_CONTROLLER",
+	"EXPANDER",
+	"PORT_MULTIPLIER",
+	"PORT_MULTIPLEXER",
+	"MULTI_DROP_I2C_BUS",
+};
+#endif
+
+struct asd_ms_node_desc {
+	u8    type;
+	u8    num_phy_desc;
+	u8    size_phy_desc;
+	u8    _resvd;
+	u8    name[16];
+	struct asd_nd_phy_desc phy_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ms_conn_map {
+	char  sig[2];		  /* 'M', 'C' */
+	__le16 next;
+	u8    maj;		  /* 0 */
+	u8    min;		  /* 0 */
+	__le16 cm_size;		  /* size of this struct */
+	u8    num_conn;
+	u8    conn_size;
+	u8    num_nodes;
+	u8    usage_model_id;
+	u32   _resvd;
+	struct asd_ms_conn_desc conn_desc[0];
+	struct asd_ms_node_desc node_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_entry {
+	u8    sas_addr[SAS_ADDR_SIZE];
+	u8    sas_link_rates;  /* max in hi bits, min in low bits */
+	u8    flags;
+	u8    sata_link_rates;
+	u8    _r[5];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_settings {
+	u8    id0;		  /* P'h'y */
+	u8    _r;
+	u16   next;
+	u8    num_phys;	      /* number of PHYs in the PCI function */
+	u8    _r2[3];
+	struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+struct asd_ll_el {
+	u8   id0;
+	u8   id1;
+	__le16  next;
+	u8   something_here[0];
+} __attribute__ ((packed));
+
+static int asd_poll_flash(struct asd_ha_struct *asd_ha)
+{
+	int c;
+	u8 d;
+
+	for (c = 5000; c > 0; c--) {
+		d  = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+		d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+		if (!d)
+			return 0;
+		udelay(5);
+	}
+	return -ENOENT;
+}
+
+static int asd_reset_flash(struct asd_ha_struct *asd_ha)
+{
+	int err;
+
+	err = asd_poll_flash(asd_ha);
+	if (err)
+		return err;
+	asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET);
+	err = asd_poll_flash(asd_ha);
+
+	return err;
+}
+
+static inline int asd_read_flash_seg(struct asd_ha_struct *asd_ha,
+				     void *buffer, u32 offs, int size)
+{
+	asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs,
+			    size);
+	return 0;
+}
+
+/**
+ * asd_find_flash_dir - finds and reads the flash directory
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to flash directory structure
+ *
+ * If found, the flash directory segment will be copied to
+ * @flash_dir.  Return 1 if found, 0 if not.
+ */
+static int asd_find_flash_dir(struct asd_ha_struct *asd_ha,
+			      struct asd_flash_dir *flash_dir)
+{
+	u32 v;
+	for (v = 0; v < FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) {
+		asd_read_flash_seg(asd_ha, flash_dir, v,
+				   sizeof(FLASH_DIR_COOKIE)-1);
+		if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE,
+			   sizeof(FLASH_DIR_COOKIE)-1) == 0) {
+			asd_ha->hw_prof.flash.dir_offs = v;
+			asd_read_flash_seg(asd_ha, flash_dir, v,
+					   sizeof(*flash_dir));
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int asd_flash_getid(struct asd_ha_struct *asd_ha)
+{
+	int err = 0;
+	u32 reg, inc;
+
+	reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
+
+	if (!(reg & FLASHEX)) {
+		ASD_DPRINTK("flash doesn't exist\n");
+		return -ENOENT;
+	}
+	if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR,
+				  &asd_ha->hw_prof.flash.bar)) {
+		asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n",
+			   pci_name(asd_ha->pcidev));
+		return -ENOENT;
+	}
+	asd_ha->hw_prof.flash.present = 1;
+	asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0;
+	err = asd_reset_flash(asd_ha);
+	if (err) {
+		ASD_DPRINTK("couldn't reset flash(%d)\n", err);
+		return err;
+	}
+	/* Get flash info. This would most likely be AMD Am29LV family flash.
+	 * First try the sequence for word mode.  It is the same as for
+	 * 008B (byte mode only), 160B (word mode) and 800D (word mode).
+	 */
+	reg = asd_ha->hw_prof.flash.bar;
+	inc = asd_ha->hw_prof.flash.wide ? 2 : 1;
+	asd_write_reg_byte(asd_ha, reg + 0x555, 0xAA);
+	asd_write_reg_byte(asd_ha, reg + 0x2AA, 0x55);
+	asd_write_reg_byte(asd_ha, reg + 0x555, 0x90);
+	asd_ha->hw_prof.flash.manuf = asd_read_reg_byte(asd_ha, reg);
+	asd_ha->hw_prof.flash.dev_id= asd_read_reg_byte(asd_ha,reg+inc);
+	asd_ha->hw_prof.flash.sec_prot = asd_read_reg_byte(asd_ha,reg+inc+inc);
+	/* Get out of autoselect mode. */
+	err = asd_reset_flash(asd_ha);
+
+	if (asd_ha->hw_prof.flash.manuf == FLASH_MANUF_AMD) {
+		ASD_DPRINTK("0Found FLASH(%d) manuf:%d, dev_id:0x%x, "
+			    "sec_prot:%d\n",
+			    asd_ha->hw_prof.flash.wide ? 16 : 8,
+			    asd_ha->hw_prof.flash.manuf,
+			    asd_ha->hw_prof.flash.dev_id,
+			    asd_ha->hw_prof.flash.sec_prot);
+		return 0;
+	}
+
+	/* Ok, try the sequence for byte mode of 160B and 800D.
+	 * We may actually never need this.
+	 */
+	asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA);
+	asd_write_reg_byte(asd_ha, reg + 0x555, 0x55);
+	asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90);
+	asd_ha->hw_prof.flash.manuf = asd_read_reg_byte(asd_ha, reg);
+	asd_ha->hw_prof.flash.dev_id = asd_read_reg_byte(asd_ha, reg + 2);
+	asd_ha->hw_prof.flash.sec_prot = asd_read_reg_byte(asd_ha, reg + 4);
+	err = asd_reset_flash(asd_ha);
+
+	if (asd_ha->hw_prof.flash.manuf == FLASH_MANUF_AMD) {
+		ASD_DPRINTK("1Found FLASH(%d) manuf:%d, dev_id:0x%x, "
+			    "sec_prot:%d\n",
+			    asd_ha->hw_prof.flash.wide ? 16 : 8,
+			    asd_ha->hw_prof.flash.manuf,
+			    asd_ha->hw_prof.flash.dev_id,
+			    asd_ha->hw_prof.flash.sec_prot);
+		return 0;
+	}
+
+	return -ENOENT;
+}
+
+static u16 asd_calc_flash_chksum(u16 *p, int size)
+{
+	u16 chksum = 0;
+	
+	while (size-- > 0)
+		chksum += *p++;
+
+	return chksum;
+}
+
+
+static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type,
+			     u32 *offs, u32 *size)
+{
+	int i;
+	struct asd_flash_de *de;
+	
+	for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) {
+		u32 type = le32_to_cpu(flash_dir->dir_entry[i].type);
+
+		type &= FLASH_DE_TYPE_MASK;
+		if (type == entry_type)
+			break;
+	}
+	if (i >= FLASH_MAX_DIR_ENTRIES)
+		return -ENOENT;
+	de = &flash_dir->dir_entry[i];
+	*offs = le32_to_cpu(de->offs);
+	*size = le32_to_cpu(de->pad_size);
+	return 0;
+}
+
+static int asd_validate_ms(struct asd_manuf_sec *ms)
+{
+	if (ms->sig[0] != 'S' || ms->sig[1] != 'M') {
+		ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n",
+			    ms->sig[0], ms->sig[1]);
+		return -ENOENT;
+	}
+	if (ms->maj != 0) {
+		asd_printk("unsupported manuf. sector. major version:%x\n",
+			   ms->maj);
+		return -ENOENT;
+	}
+	ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next);
+	ms->chksum = le16_to_cpu((__force __le16) ms->chksum);
+	ms->size = le16_to_cpu((__force __le16) ms->size);
+
+	if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) {
+		ASD_DPRINTK("failed manuf sector checksum\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha,
+			       struct asd_manuf_sec *ms)
+{
+	memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE);
+	return 0;
+}
+
+static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha,
+			      struct asd_manuf_sec *ms)
+{
+	memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE);
+	asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0';
+	return 0;
+}
+
+/**
+ * asd_find_ll_by_id - find a linked list entry by its id
+ * @start: void pointer to the first element in the linked list
+ * @id0: the first byte of the id  (offs 0)
+ * @id1: the second byte of the id (offs 1)
+ *
+ * @start has to be the _base_ element start, since the
+ * linked list entries's offset is from this pointer.
+ * Some linked list entries use only the first id, in which case
+ * you can pass 0xFF for the second.
+ */
+static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1)
+{
+	struct asd_ll_el *el = start;
+
+	do {
+		switch (id1) {
+		default:
+			if (el->id1 == id1)
+		case 0xFF:
+				if (el->id0 == id0)
+					return el;
+		}
+		el = start + le16_to_cpu(el->next);
+	} while (el != start);
+
+	return NULL;
+}
+
+/**
+ * asd_ms_get_phy_params - get phy parameters from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @manuf_sec: pointer to the manufacturing sector
+ *
+ * The manufacturing sector contans also the linked list of sub-segments,
+ * since when it was read, its size was taken from the flash directory,
+ * not from the structure size.
+ *
+ * HIDDEN phys do not count in the total count.  REPORTED phys cannot
+ * be enabled but are reported and counted towards the total.
+ * ENEBLEABLE phys are enabled by default and count towards the total.
+ * The absolute total phy number is ASD_MAX_PHYS.  hw_prof->num_phys
+ * merely specifies the number of phys the host adapter decided to
+ * report.  E.g., it is possible for phys 0, 1 and 2 to be HIDDEN,
+ * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENEBLEABLE.
+ * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2
+ * are actually enabled (enabled by default, max number of phys
+ * enableable in this case).
+ */
+static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha,
+				 struct asd_manuf_sec *manuf_sec)
+{
+	int i;
+	int en_phys = 0;
+	int rep_phys = 0;
+	struct asd_manuf_phy_param *phy_param;
+
+	phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M');
+	if (!phy_param) {
+		ASD_DPRINTK("ms: no phy parameters found\n");
+		return -ENOENT;
+	}
+
+	if (phy_param->maj != 0) {
+		asd_printk("unsupported manuf. phy param major version:0x%x\n",
+			   phy_param->maj);
+		return -ENOENT;
+	}
+
+	ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc);
+	asd_ha->hw_prof.enabled_phys = 0;
+	for (i = 0; i < phy_param->num_phy_desc; i++) {
+		struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i];
+		switch (pd->state & 0xF) {
+		case MS_PHY_STATE_HIDDEN:
+			ASD_DPRINTK("ms: phy%d: HIDDEN\n", i);
+			continue;
+		case MS_PHY_STATE_REPORTED:
+			ASD_DPRINTK("ms: phy%d: REPORTED\n", i);
+			asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+			rep_phys++;
+			continue;
+		case MS_PHY_STATE_ENABLEABLE:
+			ASD_DPRINTK("ms: phy%d: ENEBLEABLE\n", i);
+			asd_ha->hw_prof.enabled_phys |= (1 << i);
+			en_phys++;
+			break;
+		}
+		asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0;
+		asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1;
+		asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2;
+		asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3;
+	}
+	asd_ha->hw_prof.max_phys = rep_phys + en_phys;
+	asd_ha->hw_prof.num_phys = en_phys;
+	ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n",
+		    asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys);
+	ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys);
+	return 0;	
+}
+
+static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha,
+				    struct asd_manuf_sec *manuf_sec)
+{
+	struct asd_ms_conn_map *cm;
+
+	cm = asd_find_ll_by_id(manuf_sec, 'M', 'C');
+	if (!cm) {
+		ASD_DPRINTK("ms: no connector map found\n");
+		return -ENOENT;
+	}
+
+	if (cm->maj != 0) {
+		ASD_DPRINTK("ms: unsupported: connector map major version 0x%x"
+			    "\n", cm->maj);
+		return -ENOENT;
+	}
+
+	/* XXX */
+
+	return 0;
+}
+
+
+/**
+ * asd_process_ms - find and extract information from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ms(struct asd_ha_struct *asd_ha,
+			  struct asd_flash_dir *flash_dir)
+{
+	int err;
+	struct asd_manuf_sec *manuf_sec;
+	u32 offs, size;
+
+	err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size);
+	if (err) {
+		ASD_DPRINTK("Couldn't find the manuf. sector\n");
+		goto out;
+	}
+
+	if (size == 0)
+		goto out;
+
+	err = -ENOMEM;
+	manuf_sec = kmalloc(size, GFP_KERNEL);
+	if (!manuf_sec) {
+		ASD_DPRINTK("no mem for manuf sector\n");
+		goto out;
+	}
+
+	err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size);
+	if (err) {
+		ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n",
+			    offs, size);
+		goto out2;
+	}
+
+	err = asd_validate_ms(manuf_sec);
+	if (err) {
+		ASD_DPRINTK("couldn't validate manuf sector\n");
+		goto out2;
+	}
+
+	err = asd_ms_get_sas_addr(asd_ha, manuf_sec);
+	if (err) {
+		ASD_DPRINTK("couldn't read the SAS_ADDR\n");
+		goto out2;
+	}
+	ASD_DPRINTK("manuf sect SAS_ADDR %llx\n",
+		    SAS_ADDR(asd_ha->hw_prof.sas_addr));
+
+	err = asd_ms_get_pcba_sn(asd_ha, manuf_sec);
+	if (err) {
+		ASD_DPRINTK("couldn't read the PCBA SN\n");
+		goto out2;
+	}
+	ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn);
+
+	err = asd_ms_get_phy_params(asd_ha, manuf_sec);
+	if (err) {
+		ASD_DPRINTK("ms: couldn't get phy parameters\n");
+		goto out2;
+	}
+
+	err = asd_ms_get_connector_map(asd_ha, manuf_sec);
+	if (err) {
+		ASD_DPRINTK("ms: couldn't get connector map\n");
+		goto out2;
+	}
+
+out2:
+	kfree(manuf_sec);
+out:
+	return err;
+}
+
+static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha,
+					  struct asd_ctrla_phy_settings *ps)
+{
+	int i;
+	for (i = 0; i < ps->num_phys; i++) {
+		struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i];
+
+		if (!PHY_ENABLED(asd_ha, i))
+			continue;
+		if (*(u64 *)pe->sas_addr == 0) {
+			asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+			continue;
+		}
+		/* This is the SAS address which should be sent in IDENTIFY. */
+		memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr,
+		       SAS_ADDR_SIZE);
+		asd_ha->hw_prof.phy_desc[i].max_sas_lrate =
+			(pe->sas_link_rates & 0xF0) >> 4;
+		asd_ha->hw_prof.phy_desc[i].min_sas_lrate =
+			(pe->sas_link_rates & 0x0F);
+		asd_ha->hw_prof.phy_desc[i].max_sata_lrate =
+			(pe->sata_link_rates & 0xF0) >> 4;
+		asd_ha->hw_prof.phy_desc[i].min_sata_lrate =
+			(pe->sata_link_rates & 0x0F);
+		asd_ha->hw_prof.phy_desc[i].flags = pe->flags;
+		ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x,"
+			    " sata rate:0x%x-0x%x, flags:0x%x\n",
+			    i,
+			    SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr),
+			    asd_ha->hw_prof.phy_desc[i].max_sas_lrate,
+			    asd_ha->hw_prof.phy_desc[i].min_sas_lrate,
+			    asd_ha->hw_prof.phy_desc[i].max_sata_lrate,
+			    asd_ha->hw_prof.phy_desc[i].min_sata_lrate,
+			    asd_ha->hw_prof.phy_desc[i].flags);
+	}
+	
+	return 0;
+}
+
+/**
+ * asd_process_ctrl_a_user - process CTRL-A user settings
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha,
+				   struct asd_flash_dir *flash_dir)
+{
+	int err;
+	u32 offs, size;
+	struct asd_ll_el *el;
+	struct asd_ctrla_phy_settings *ps;
+
+	err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size);
+	if (err) {
+		ASD_DPRINTK("couldn't find CTRL-A user settings section\n");
+		goto out;
+	}
+
+	if (size == 0)
+		goto out;
+
+	err = -ENOMEM;
+	el = kmalloc(size, GFP_KERNEL);
+	if (!el) {
+		ASD_DPRINTK("no mem for ctrla user settings section\n");
+		goto out;
+	}
+
+	err = asd_read_flash_seg(asd_ha, (void *)el, offs, size);
+	if (err) {
+		ASD_DPRINTK("couldn't read ctrla phy settings section\n");
+		goto out2;
+	}
+
+	err = -ENOENT;
+	ps = asd_find_ll_by_id(el, 'h', 0xFF);
+	if (!ps) {
+		ASD_DPRINTK("couldn't find ctrla phy settings struct\n");
+		goto out2;
+	}
+
+	err = asd_process_ctrla_phy_settings(asd_ha, ps);
+	if (err) {
+		ASD_DPRINTK("couldn't process ctrla phy settings\n");
+		goto out2;
+	}
+out2:
+	kfree(el);
+out:
+	return err;
+}
+
+/**
+ * asd_read_flash - read flash memory
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_flash(struct asd_ha_struct *asd_ha)
+{
+	int err;
+	struct asd_flash_dir *flash_dir;
+
+	err = asd_flash_getid(asd_ha);
+	if (err)
+		return err;
+
+	flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL);
+	if (!flash_dir)
+		return -ENOMEM;
+
+	err = -ENOENT;
+	if (!asd_find_flash_dir(asd_ha, flash_dir)) {
+		ASD_DPRINTK("couldn't find flash directory\n");
+		goto out;
+	}
+
+	if (le32_to_cpu(flash_dir->rev) != 2) {
+		asd_printk("unsupported flash dir version:0x%x\n",
+			   le32_to_cpu(flash_dir->rev));
+		goto out;
+	}
+
+	err = asd_process_ms(asd_ha, flash_dir);
+	if (err) {
+		ASD_DPRINTK("couldn't process manuf sector settings\n");
+		goto out;
+	}
+
+	err = asd_process_ctrl_a_user(asd_ha, flash_dir);
+	if (err) {
+		ASD_DPRINTK("couldn't process CTRL-A user settings\n");
+		goto out;
+	}
+
+out:
+	kfree(flash_dir);
+	return err;
+}

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/