Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964844AbVIMQSG (ORCPT ); Tue, 13 Sep 2005 12:18:06 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S964845AbVIMQSG (ORCPT ); Tue, 13 Sep 2005 12:18:06 -0400 Received: from ispmxmta09-srv.alltel.net ([166.102.165.170]:53949 "EHLO ispmxmta09-srv.alltel.net") by vger.kernel.org with ESMTP id S964844AbVIMQSE (ORCPT ); Tue, 13 Sep 2005 12:18:04 -0400 Date: Tue, 13 Sep 2005 12:18:02 -0400 (EDT) From: Burton Windle X-X-Sender: bwindle@postal To: linux-kernel@vger.kernel.org Subject: SCSI issue with 2.6.14-rc1 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3318 Lines: 90 Dell Poweredge 1300, MegaRAID SCSI with hardware RAID1. With 2.6.13, system was fine, but on 2.6.14-rc1, it sees the RAID array as a 0mb drive with 1 512-byte sector, and seems to have a bit of a problem mounting / 2.6.13: megaraid: found 0x8086:0x1960:bus 0:slot 13:func 1 scsi0:Found MegaRAID controller at 0xf8802000, IRQ:185 megaraid: [1.06:1p00] detected 1 logical drives. megaraid: channel[0] is raid. megaraid: channel[1] is raid. scsi0 : LSI Logic MegaRAID 1.06 254 commands 16 targs 5 chans 7 luns scsi0: scanning scsi channel 0 for logical drives. Vendor: MegaRAID Model: LD0 RAID1 8568R Rev: 1.06 Type: Direct-Access ANSI SCSI revision: 02 scsi0: scanning scsi channel 4 [P0] for physical devices. scsi0: scanning scsi channel 5 [P1] for physical devices. st: Version 20050501, fixed bufsize 32768, s/g segs 256 SCSI device sda: 17547264 512-byte hdwr sectors (8984 MB) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ sda: asking for cache data failed sda: assuming drive cache: write through SCSI device sda: 17547264 512-byte hdwr sectors (8984 MB) sda: asking for cache data failed sda: assuming drive cache: write through sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 2.6.14-rc1: megaraid: found 0x8086:0x1960:bus 0:slot 13:func 1 scsi0:Found MegaRAID controller at 0xf8802000, IRQ:185 megaraid: [1.06:1p00] detected 1 logical drives. megaraid: channel[0] is raid. megaraid: channel[1] is raid. scsi0 : LSI Logic MegaRAID 1.06 254 commands 16 targs 5 chans 7 luns scsi0: scanning scsi channel 0 for logical drives. Vendor: MegaRAID Model: LD0 RAID1 8568R Rev: 1.06 Type: Direct-Access ANSI SCSI revision: 02 scsi0: scanning scsi channel 4 [P0] for physical devices. scsi0: scanning scsi channel 5 [P1] for physical devices. st: Version 20050830, fixed bufsize 32768, s/g segs 256 sda : sector size 0 reported, assuming 512. SCSI device sda: 1 512-byte hdwr sectors (0 MB) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ sda: asking for cache data failed sda: assuming drive cache: write through sda : sector size 0 reported, assuming 512. SCSI device sda: 1 512-byte hdwr sectors (0 MB) sda: asking for cache data failed sda: assuming drive cache: write through sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Linux RTIX-NM-003 2.6.13 #8 SMP Wed Aug 31 16:38:12 EDT 2005 i686 GNU/Linux Gnu C 2.95.4 Gnu make 3.80 binutils 2.16.1 util-linux 2.12p mount 2.12p module-init-tools 3.2-pre1 e2fsprogs 1.37 reiserfsprogs line reiser4progs line Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Procps 3.2.5 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.2.1 CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_LOGGING=y CONFIG_MEGARAID_LEGACY=y -- Burton Windle bwindle@fint.org - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/