Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030187AbVI1E4o (ORCPT ); Wed, 28 Sep 2005 00:56:44 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030189AbVI1E4o (ORCPT ); Wed, 28 Sep 2005 00:56:44 -0400 Received: from pool-151-202-105-53.ny325.east.verizon.net ([151.202.105.53]:53174 "EHLO blaze.homeip.net") by vger.kernel.org with ESMTP id S1030187AbVI1E4n (ORCPT ); Wed, 28 Sep 2005 00:56:43 -0400 Date: Wed, 28 Sep 2005 00:56:32 -0400 From: Paul Blazejowski To: Andrew Morton Cc: linux-kernel@vger.kernel.org, ccalica@gmail.com, xorg@lists.freedesktop.org Subject: Re: 2.6.14-rc2-mm1 Message-ID: <20050928045630.GA9960@blazebox.homeip.net> References: <20050925220037.GA8776@blazebox.homeip.net> <20050925164421.75c734d2.akpm@osdl.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="aM3YZ0Iwxop3KEKx" Content-Disposition: inline In-Reply-To: <20050925164421.75c734d2.akpm@osdl.org> X-Mailer: Mutt http://www.mutt.org X-Operating-System: Slackware 10.2.0 X-Kernel-Version: Linux blaze 2.6.13.2 i686 User-Agent: Mutt/1.5.10i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 34825 Lines: 807 --aM3YZ0Iwxop3KEKx Content-Type: multipart/mixed; boundary="FL5UXtIhxfXey3p5" Content-Disposition: inline --FL5UXtIhxfXey3p5 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Sep 25, 2005 at 04:44:21PM -0700, Andrew Morton wrote: > Paul Blazejowski wrote: > > > > Upon quick testing the latest mm kernel it appears there's some kind of > > race condition when using dual core cpu esp when using XORG and USB > > (although PS2 has same issue) kebyboard rate being too fast. > >=20 > > The same behaviour happens on vanilla 2.6.13 kernel. Reporting this al= so > > to XORG list in hopes to help debug this issue. >=20 > Is it possible to narrow this down a bit further? Was 2.6.12 OK? >=20 > If we can identify two reasonably-close-in-time versions either side of t= he > regression then the next step would be to run `dmesg -s 1000000' under bo= th > kernel versions, then run `diff -u dmesg.good dmesg.bad'. >=20 >=20 No 2.6.12 is not OK. I don't think there's any regression between the recent kernels. It just does not work on 3 of them i tried so far. I am attatching diff from 2.6.12/2.6.13 against 2.6.14-rc2-mm1. --FL5UXtIhxfXey3p5 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dm2612-dm2614.diff" Content-Transfer-Encoding: quoted-printable --- dm2612 2005-09-26 02:02:15.000000000 -0400 +++ dm2614 2005-09-26 01:16:52.000000000 -0400 @@ -1,4 +1,4 @@ -Linux version 2.6.12.6 (root@blaze) (gcc version 3.3.6) #1 SMP Mon Sep 26 = 01:40:47 EDT 2005 +Linux version 2.6.14-rc2-mm1 (root@blaze) (gcc version 3.3.6) #1 SMP Sun S= ep 25 17:03:22 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) @@ -12,9 +12,10 @@ 511MB LOWMEM available. found SMP MP-table at 000f5a30 On node 0 totalpages: 131056 - DMA zone: 4096 pages, LIFO batch:1 - Normal zone: 126960 pages, LIFO batch:31 - HighMem zone: 0 pages, LIFO batch:1 + DMA zone: 4096 pages, LIFO batch:2 + DMA32 zone: 0 pages, LIFO batch:2 + Normal zone: 126960 pages, LIFO batch:64 + HighMem zone: 0 pages, LIFO batch:2 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f7dc0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 @@ -42,22 +43,22 @@ ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information -Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000) +Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Built 1 zonelists -Kernel command line: root=3D/dev/sda1 ro vmalloc=3D256M console=3DttyS0,57= 600n8 console=3Dtty0 rootflags=3Dquota elevator=3Dcfq vga=3D795 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 -CPU 0 irqstacks, hard=3Dc041a000 soft=3Dc0418000 +Kernel command line: root=3D/dev/sda1 ro vmalloc=3D256M console=3DttyS0,57= 600n8 console=3Dtty0 rootflags=3Dquota elevator=3Dcfq vga=3D795 +CPU 0 irqstacks, hard=3Dc043e000 soft=3Dc043c000 PID hash table entries: 2048 (order: 11, 32768 bytes) -Detected 2352.374 MHz processor. +Detected 2352.758 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -Memory: 515352k/524224k available (2289k kernel code, 8380k reserved, 617k= data, 236k init, 0k highmem) +Memory: 515152k/524224k available (2390k kernel code, 8560k reserved, 662k= data, 232k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... O= k. -Calibrating delay loop... 4653.05 BogoMIPS (lpj=3D2326528) +Calibrating delay using timer specific routine.. 4708.36 BogoMIPS (lpj=3D2= 354180) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 000= 00001 00000000 00000003 CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 0000= 0001 00000000 00000003 @@ -67,41 +68,37 @@ CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 0= 0000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. -Enabling fast FPU save and restore... done. +mtrr: v2.0 (20020519) +Enabling fast FPU save and restore... <7>spurious 8259A interrupt: IRQ7. +done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Booting processor 1/1 eip 2000 -CPU 1 irqstacks, hard=3Dc041b000 soft=3Dc0419000 +CPU 1 irqstacks, hard=3Dc043f000 soft=3Dc043d000 Initializing CPU#1 -Calibrating delay loop... 4702.20 BogoMIPS (lpj=3D2351104) +Calibrating delay using timer specific routine.. 4704.69 BogoMIPS (lpj=3D2= 352349) CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 000= 00001 00000000 00000003 CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 0000= 0001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) -CPU 1(2) -> Core 0 +CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 0= 0000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 -Total of 2 processors activated (9355.26 BogoMIPS). +Total of 2 processors activated (9413.05 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=3D0x31 pin1=3D0 pin2=3D-1 checking TSC synchronization across 2 CPUs:=20 CPU#0 had 0 usecs TSC skew, fixed it up. CPU#1 had 0 usecs TSC skew, fixed it up. Brought up 2 CPUs -CPU0 attaching sched-domain: - domain 0: span 3 - groups: 1 2 -CPU1 attaching sched-domain: - domain 0: span 3 - groups: 2 1 NET: Registered protocol family 16 +ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xf2740, last bus=3D5 -PCI: Using configuration type 1 -mtrr: v2.0 (20020519) -ACPI: Subsystem revision 20050309 +PCI: Using MMCONFIG +ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) @@ -148,12 +145,37 @@ SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a = report -pnp: 00:00: ioport range 0x4000-0x407f could not be reserved -pnp: 00:00: ioport range 0x4080-0x40ff has been reserved -pnp: 00:00: ioport range 0x4400-0x447f has been reserved -pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved -pnp: 00:00: ioport range 0x4800-0x487f has been reserved -pnp: 00:00: ioport range 0x4880-0x48ff has been reserved +pnp: 00:01: ioport range 0x4000-0x407f could not be reserved +pnp: 00:01: ioport range 0x4080-0x40ff has been reserved +pnp: 00:01: ioport range 0x4400-0x447f has been reserved +pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved +pnp: 00:01: ioport range 0x4800-0x487f has been reserved +pnp: 00:01: ioport range 0x4880-0x48ff has been reserved +PCI: Bridge: 0000:00:09.0 + IO window: 8000-afff + MEM window: d0000000-d1ffffff + PREFETCH window: 30000000-300fffff +PCI: Bridge: 0000:00:0b.0 + IO window: disabled. + MEM window: disabled. + PREFETCH window: disabled. +PCI: Bridge: 0000:00:0c.0 + IO window: disabled. + MEM window: disabled. + PREFETCH window: disabled. +PCI: Bridge: 0000:00:0d.0 + IO window: disabled. + MEM window: disabled. + PREFETCH window: disabled. +PCI: Bridge: 0000:00:0e.0 + IO window: disabled. + MEM window: c8000000-cfffffff + PREFETCH window: c0000000-c7ffffff +PCI: Setting latency timer of device 0000:00:09.0 to 64 +PCI: Setting latency timer of device 0000:00:0b.0 to 64 +PCI: Setting latency timer of device 0000:00:0c.0 to 64 +PCI: Setting latency timer of device 0000:00:0d.0 to 64 +PCI: Setting latency timer of device 0000:00:0e.0 to 64 Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) @@ -165,17 +187,22 @@ vesafb: protected mode interface info at c000:d620 vesafb: scrolling: redraw vesafb: Truecolor: size=3D8:8:8:8, shift=3D24:16:8:0 +vesafb: Mode is VGA compatible Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] +ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) +ACPI: CPU0 (power states: C1[C1]) +ACPI: CPU1 (power states: C1[C1]) ACPI: Thermal Zone [THRM] (40 C) PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 -Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled +Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A +mice: PS/2 mouse device common for all mice io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered @@ -194,13 +221,9 @@ ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... -Probing IDE interface ide2... -Probing IDE interface ide3... -Probing IDE interface ide4... -Probing IDE interface ide5... ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 -ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) = -> IRQ 18 -scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 +ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) = -> IRQ 16 +scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs =20 @@ -208,15 +231,14 @@ Type: CD-ROM ANSI SCSI revision: 02 target0:0:4: Beginning Domain Validation target0:0:4: Domain Validation skipping write tests -(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16) + target0:0:4: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target0:0:4: Ending Domain Validation Vendor: IBM Model: IC35L036UWD210-0 Rev: S5CQ Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:6:0: Tagged Queuing enabled. Depth 32 target0:0:6: Beginning Domain Validation -WIDTH IS 1 -(scsi0:A:6): 6.600MB/s transfers (16bit) -(scsi0:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) + target0:0:6: wide asynchronous. + target0:0:6: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target0:0:6: Ending Domain Validation SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back @@ -224,22 +246,24 @@ SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > Attached scsi disk sda at scsi0, channel 0, id 6, lun 0 -mice: PS/2 mouse device common for all mice device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 -IP: routing cache hash table of 4096 buckets, 32Kbytes +IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 6, 262144 bytes) TCP: Hash tables configured (established 32768 bind 32768) +TCP reno registered +TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq +Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 2 devices found XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 VFS: Mounted root (xfs filesystem) readonly. -Freeing unused kernel memory: 236k freed -Adding 506008k swap on /dev/sda7. Priority:-1 extents:1 +Freeing unused kernel memory: 232k freed +Adding 506008k swap on /dev/sda7. Priority:-1 extents:1 across:506008k Linux agpgart interface v0.101 (c) Dave Jones XFS mounting filesystem sda2 Ending clean XFS mount for filesystem: sda2 @@ -249,35 +273,35 @@ Ending clean XFS mount for filesystem: sda5 XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 -forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.32. +forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.41. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 -ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) = -> IRQ 23 +ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) = -> IRQ 17 PCI: Setting latency timer of device 0000:00:0a.0 to 64 eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 eth0: no link during initialization. eth0: link up. ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 -ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) = -> IRQ 17 -ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) = -> IRQ 17 +ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) = -> IRQ 18 +ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) = -> IRQ 18 eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State ieee1394: Initialized config rom entry `ip1394' -ohci1394: $Rev: 1250 $ Ben Collins -ACPI: PCI Interrupt 0000:05:07.2[B] -> Link [APC3] -> GSI 18 (level, low) = -> IRQ 18 -ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[18] MMIO=3D[d100f000-d100= f7ff] Max Packet=3D[2048] +ohci1394: $Rev: 1299 $ Ben Collins +ACPI: PCI Interrupt 0000:05:07.2[B] -> Link [APC3] -> GSI 18 (level, low) = -> IRQ 16 +ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[16] MMIO=3D[d100f000-d100= f7ff] Max Packet=3D[2048] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 -ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) = -> IRQ 16 -ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=3D[16] MMIO=3D[d100d000-d100= d7ff] Max Packet=3D[2048] +ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) = -> IRQ 19 +ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=3D[19] MMIO=3D[d100d000-d100= d7ff] Max Packet=3D[2048] gameport: EMU10K1 is pci0000:05:07.1/gameport0, io 0x8400, speed 1193kHz -ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) = -> IRQ 17 +ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) = -> IRQ 18 Installing spdif_bug patch: Audigy 2 Platinum [SB0240P] -libata version 1.11 loaded. -sata_nv version 0.6 +libata version 1.12 loaded. +sata_nv version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 -ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) = -> IRQ 22 +ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) = -> IRQ 20 PCI: Setting latency timer of device 0000:00:07.0 to 64 -ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 22 -ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 22 +ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 20 +ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 20 ata1: no device found (phy stat 00000000) scsi1 : sata_nv ata2: no device found (phy stat 00000000) @@ -289,13 +313,14 @@ ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 21 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091065c55] ata3: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88= :407f -ata3: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48 +ata3: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata3: dev 0 configured for UDMA/133 scsi3 : sata_nv +ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d800004f6359] ata4: no device found (phy stat 00000000) scsi4 : sata_nv Vendor: ATA Model: WDC WD2000JD-00H Rev: 08.0 @@ -309,35 +334,34 @@ nv_sata: Secondary device added nv_sata: Secondary device removed sdb1 sdb2 -ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d800004f6359] Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0 PCI: Enabling device 0000:00:04.0 (0000 -> 0003) ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 -ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20 (level, low) = -> IRQ 20 +ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20 (level, low) = -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 -intel8x0_measure_ac97_clock: measured 49659 usecs -intel8x0: clocking to 46738 +intel8x0_measure_ac97_clock: measured 51749 usecs +intel8x0: clocking to 46867 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 -ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) = -> IRQ 23 +ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) = -> IRQ 17 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 -ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000 +ehci_hcd 0000:00:02.1: irq 17, io mem 0xfeb00000 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: park 0 ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected -ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) +ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 -ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) = -> IRQ 22 +ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) = -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 -ohci_hcd 0000:00:02.0: irq 22, io mem 0xd2004000 +ohci_hcd 0000:00:02.0: irq 20, io mem 0xd2004000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-2: new high speed USB device using ehci_hcd and address 2 @@ -356,11 +380,13 @@ input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000= :00:02.0-3.1 input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:0= 0:02.0-3.1 usbcore: registered new driver usbhid -drivers/usb/input/hid-core.c: v2.01:USB HID core driver +drivers/usb/input/hid-core.c: v2.6:USB HID core driver Real Time Clock Driver v1.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,E= CP,DMA] -gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 917kHz -USB Universal Host Controller Interface driver v2.2 +gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 903kHz +USB Universal Host Controller Interface driver v2.3 +NET: Registered protocol family 10 +IPv6 over IPv4 tunneling driver --FL5UXtIhxfXey3p5 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dm2613-dm2614.diff" Content-Transfer-Encoding: quoted-printable --- dm2613 2005-09-26 01:55:34.000000000 -0400 +++ dm2614 2005-09-26 01:16:52.000000000 -0400 @@ -1,4 +1,4 @@ -Linux version 2.6.13.1 (root@blaze) (gcc version 3.3.6) #2 SMP Mon Sep 12 = 13:29:14 EDT 2005 +Linux version 2.6.14-rc2-mm1 (root@blaze) (gcc version 3.3.6) #1 SMP Sun S= ep 25 17:03:22 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) @@ -12,9 +12,10 @@ 511MB LOWMEM available. found SMP MP-table at 000f5a30 On node 0 totalpages: 131056 - DMA zone: 4096 pages, LIFO batch:1 - Normal zone: 126960 pages, LIFO batch:31 - HighMem zone: 0 pages, LIFO batch:1 + DMA zone: 4096 pages, LIFO batch:2 + DMA32 zone: 0 pages, LIFO batch:2 + Normal zone: 126960 pages, LIFO batch:64 + HighMem zone: 0 pages, LIFO batch:2 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f7dc0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 @@ -42,22 +43,22 @@ ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information -Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000) +Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Built 1 zonelists -Kernel command line: root=3D/dev/sda1 ro vmalloc=3D256M console=3DttyS0,57= 600n8 console=3Dtty0 rootflags=3Dquota elevator=3Dcfq vga=3D795 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 -CPU 0 irqstacks, hard=3Dc0469000 soft=3Dc0467000 +Kernel command line: root=3D/dev/sda1 ro vmalloc=3D256M console=3DttyS0,57= 600n8 console=3Dtty0 rootflags=3Dquota elevator=3Dcfq vga=3D795 +CPU 0 irqstacks, hard=3Dc043e000 soft=3Dc043c000 PID hash table entries: 2048 (order: 11, 32768 bytes) -Detected 2352.785 MHz processor. +Detected 2352.758 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -Memory: 514984k/524224k available (2353k kernel code, 8756k reserved, 877k= data, 228k init, 0k highmem) +Memory: 515152k/524224k available (2390k kernel code, 8560k reserved, 662k= data, 232k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... O= k. -Calibrating delay using timer specific routine.. 4708.36 BogoMIPS (lpj=3D2= 354181) +Calibrating delay using timer specific routine.. 4708.36 BogoMIPS (lpj=3D2= 354180) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 000= 00001 00000000 00000003 CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 0000= 0001 00000000 00000003 @@ -68,14 +69,15 @@ Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) -Enabling fast FPU save and restore... done. +Enabling fast FPU save and restore... <7>spurious 8259A interrupt: IRQ7. +done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Booting processor 1/1 eip 2000 -CPU 1 irqstacks, hard=3Dc046a000 soft=3Dc0468000 +CPU 1 irqstacks, hard=3Dc043f000 soft=3Dc043d000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 4704.68 BogoMIPS (lpj=3D2= 352342) +Calibrating delay using timer specific routine.. 4704.69 BogoMIPS (lpj=3D2= 352349) CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 000= 00001 00000000 00000003 CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 0000= 0001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) @@ -85,7 +87,7 @@ Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 -Total of 2 processors activated (9413.04 BogoMIPS). +Total of 2 processors activated (9413.05 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=3D0x31 pin1=3D0 pin2=3D-1 checking TSC synchronization across 2 CPUs:=20 @@ -95,13 +97,12 @@ NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xf2740, last bus=3D5 -PCI: Using configuration type 1 -ACPI: Subsystem revision 20050408 +PCI: Using MMCONFIG +ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) -ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] @@ -144,16 +145,16 @@ SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a = report -pnp: 00:00: ioport range 0x4000-0x407f could not be reserved -pnp: 00:00: ioport range 0x4080-0x40ff has been reserved -pnp: 00:00: ioport range 0x4400-0x447f has been reserved -pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved -pnp: 00:00: ioport range 0x4800-0x487f has been reserved -pnp: 00:00: ioport range 0x4880-0x48ff has been reserved +pnp: 00:01: ioport range 0x4000-0x407f could not be reserved +pnp: 00:01: ioport range 0x4080-0x40ff has been reserved +pnp: 00:01: ioport range 0x4400-0x447f has been reserved +pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved +pnp: 00:01: ioport range 0x4800-0x487f has been reserved +pnp: 00:01: ioport range 0x4880-0x48ff has been reserved PCI: Bridge: 0000:00:09.0 IO window: 8000-afff MEM window: d0000000-d1ffffff - PREFETCH window: 20000000-200fffff + PREFETCH window: 30000000-300fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. @@ -175,7 +176,6 @@ PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 -Machine check exception polling timer started. Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) @@ -187,6 +187,7 @@ vesafb: protected mode interface info at c000:d620 vesafb: scrolling: redraw vesafb: Truecolor: size=3D8:8:8:8, shift=3D24:16:8:0 +vesafb: Mode is VGA compatible Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] @@ -201,7 +202,10 @@ Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A +mice: PS/2 mouse device common for all mice io scheduler noop registered +io scheduler anticipatory registered +io scheduler deadline registered io scheduler cfq registered (default) RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 @@ -219,20 +223,18 @@ Probing IDE interface ide1... ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) = -> IRQ 16 -scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 +scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs =20 Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 - target0:0:4: asynchronous. target0:0:4: Beginning Domain Validation target0:0:4: Domain Validation skipping write tests target0:0:4: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target0:0:4: Ending Domain Validation Vendor: IBM Model: IC35L036UWD210-0 Rev: S5CQ Type: Direct-Access ANSI SCSI revision: 03 - target0:0:6: asynchronous. scsi0:A:6:0: Tagged Queuing enabled. Depth 32 target0:0:6: Beginning Domain Validation target0:0:6: wide asynchronous. @@ -244,12 +246,11 @@ SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > Attached scsi disk sda at scsi0, channel 0, id 6, lun 0 -mice: PS/2 mouse device common for all mice device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) -TCP established hash table entries: 32768 (order: 7, 524288 bytes) -TCP bind hash table entries: 32768 (order: 6, 393216 bytes) +TCP established hash table entries: 32768 (order: 6, 262144 bytes) +TCP bind hash table entries: 32768 (order: 6, 262144 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered @@ -257,13 +258,12 @@ NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode -swsusp: Suspend partition has wrong signature? BIOS EDD facility v0.16 2004-Jun-25, 2 devices found XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 VFS: Mounted root (xfs filesystem) readonly. -Freeing unused kernel memory: 228k freed -Adding 506008k swap on /dev/sda7. Priority:-1 extents:1 +Freeing unused kernel memory: 232k freed +Adding 506008k swap on /dev/sda7. Priority:-1 extents:1 across:506008k Linux agpgart interface v0.101 (c) Dave Jones XFS mounting filesystem sda2 Ending clean XFS mount for filesystem: sda2 @@ -273,7 +273,7 @@ Ending clean XFS mount for filesystem: sda5 XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 -forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35. +forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.41. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) = -> IRQ 17 PCI: Setting latency timer of device 0000:00:0a.0 to 64 @@ -285,10 +285,6 @@ ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) = -> IRQ 18 eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State -nvidia: module license 'NVIDIA' taints kernel. -ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) = -> IRQ 16 -PCI: Setting latency timer of device 0000:01:00.0 to 64 -NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 = 12:58:54 PDT 2005 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1299 $ Ben Collins ACPI: PCI Interrupt 0000:05:07.2[B] -> Link [APC3] -> GSI 18 (level, low) = -> IRQ 16 @@ -300,7 +296,7 @@ ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) = -> IRQ 18 Installing spdif_bug patch: Audigy 2 Platinum [SB0240P] libata version 1.12 loaded. -sata_nv version 0.6 +sata_nv version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) = -> IRQ 20 PCI: Setting latency timer of device 0000:00:07.0 to 64 @@ -317,18 +313,18 @@ ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 21 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091065c55] ata3: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88= :407f -ata3: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48 +ata3: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata3: dev 0 configured for UDMA/133 scsi3 : sata_nv +ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d800004f6359] ata4: no device found (phy stat 00000000) scsi4 : sata_nv Vendor: ATA Model: WDC WD2000JD-00H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 -ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d800004f6359] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB) @@ -343,14 +339,14 @@ ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20 (level, low) = -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 -intel8x0_measure_ac97_clock: measured 50740 usecs -intel8x0: clocking to 46837 +intel8x0_measure_ac97_clock: measured 51749 usecs +intel8x0: clocking to 46867 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) = -> IRQ 17 PCI: Setting latency timer of device 0000:00:02.1 to 64 -ehci_hcd 0000:00:02.1: nVidia Corporation CK804 USB Controller +ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: irq 17, io mem 0xfeb00000 @@ -363,12 +359,12 @@ ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) = -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 -ohci_hcd 0000:00:02.0: nVidia Corporation CK804 USB Controller +ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xd2004000 -usb 1-2: new high speed USB device using ehci_hcd and address 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected +usb 1-2: new high speed USB device using ehci_hcd and address 2 hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 @@ -384,11 +380,13 @@ input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000= :00:02.0-3.1 input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:0= 0:02.0-3.1 usbcore: registered new driver usbhid -drivers/usb/input/hid-core.c: v2.01:USB HID core driver +drivers/usb/input/hid-core.c: v2.6:USB HID core driver Real Time Clock Driver v1.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,E= CP,DMA] -gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 917kHz +gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 903kHz USB Universal Host Controller Interface driver v2.3 +NET: Registered protocol family 10 +IPv6 over IPv4 tunneling driver --FL5UXtIhxfXey3p5-- --aM3YZ0Iwxop3KEKx Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFDOiJ+wu5Nmh3PsiMRAu+jAJ4hEph44YnYK9wdcjdv53KAc3mLAQCffYmv E0bbKNVT4qwhBTQIeNNLEA0= =igRQ -----END PGP SIGNATURE----- --aM3YZ0Iwxop3KEKx-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/