Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932527AbVJDPG1 (ORCPT ); Tue, 4 Oct 2005 11:06:27 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932529AbVJDPG1 (ORCPT ); Tue, 4 Oct 2005 11:06:27 -0400 Received: from ebiederm.dsl.xmission.com ([166.70.28.69]:56539 "EHLO ebiederm.dsl.xmission.com") by vger.kernel.org with ESMTP id S932527AbVJDPG1 (ORCPT ); Tue, 4 Oct 2005 11:06:27 -0400 To: Andrew Morton Cc: , Subject: [PATCH] i386: move apic init in init_IRQs From: ebiederm@xmission.com (Eric W. Biederman) Date: Tue, 04 Oct 2005 09:04:59 -0600 Message-ID: User-Agent: Gnus/5.1007 (Gnus v5.10.7) Emacs/21.4 (gnu/linux) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13969 Lines: 468 All kinds of ugliness exists because we don't initialize the apics during init_IRQs. - We calibrate jiffies in non apic mode even when we are using apics. - We have to have special code to initialize the apics when non-smp. - The legacy i8259 must exist and be setup correctly, even when we won't use it past initialization. - The kexec on panic code must restore the state of the io_apics. - init/main.c needs a special case for !smp smp_init on x86 In addition to pure code movement I needed a couple of non-obvious changes: - Move setup_boot_APIC_clock into APIC_late_time_init for simplicity. - Use cpu_khz to generate a better approximation of loops_per_jiffies so I can verify the timer interrupt is working. - Call setup_apic_nmi_watchdog again after cpu_khz is initialized on the boot cpu. Signed-off-by: Eric W. Biederman --- arch/i386/kernel/apic.c | 83 ++++++++++++++++++++----- arch/i386/kernel/i8259.c | 4 + arch/i386/kernel/io_apic.c | 6 ++ arch/i386/kernel/smpboot.c | 68 +++++--------------- arch/i386/kernel/time.c | 14 ++++ include/asm-i386/apic.h | 3 + include/asm-i386/hw_irq.h | 1 include/asm-i386/mach-default/smpboot_hooks.h | 15 ----- include/asm-i386/mach-visws/smpboot_hooks.h | 7 -- init/main.c | 11 --- 10 files changed, 106 insertions(+), 106 deletions(-) a3b2016a27cf9d583dce93f2375af7277049000f diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -803,6 +803,7 @@ no_apic: void __init init_apic_mappings(void) { + unsigned int orig_apicid; unsigned long apic_phys; /* @@ -824,8 +825,11 @@ void __init init_apic_mappings(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); + orig_apicid = boot_cpu_physical_apicid; + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); + if ((orig_apicid != -1U) && (orig_apicid != boot_cpu_physical_apicid)) + printk(KERN_WARNING "Boot APIC ID in local APIC unexpected (%d vs %d)", + orig_apicid, boot_cpu_physical_apicid); #ifdef CONFIG_X86_IO_APIC { @@ -1046,9 +1050,11 @@ static unsigned int calibration_result; void __init setup_boot_APIC_clock(void) { + unsigned long flags; apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"); using_apic_timer = 1; + local_irq_save(flags); local_irq_disable(); calibration_result = calibrate_APIC_clock(); @@ -1057,7 +1063,7 @@ void __init setup_boot_APIC_clock(void) */ setup_APIC_timer(calibration_result); - local_irq_enable(); + local_irq_restore(flags); } void __devinit setup_secondary_APIC_clock(void) @@ -1254,40 +1260,81 @@ fastcall void smp_error_interrupt(struct } /* - * This initializes the IO-APIC and APIC hardware if this is - * a UP kernel. + * This initializes the IO-APIC and APIC hardware. */ -int __init APIC_init_uniprocessor (void) +int __init APIC_init(void) { - if (enable_local_apic < 0) - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - - if (!smp_found_config && !cpu_has_apic) + if (enable_local_apic < 0) { + printk(KERN_INFO "Apic disabled\n"); + return -1; + } + + /* See if we have a SMP configuration or have forced enabled + * the local apic. + */ + if (!smp_found_config && !acpi_lapic && !cpu_has_apic) { + enable_local_apic = -1; return -1; + } /* - * Complain if the BIOS pretends there is one. + * Complain if the BIOS pretends there is an apic. + * Then get out because we don't have an a local apic. */ if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", boot_cpu_physical_apicid); + printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n"); + enable_local_apic = -1; return -1; } verify_local_APIC(); + /* + * Should not be necessary because the MP table should list the boot + * CPU too, but we do it for the sake of robustness anyway. + * Makes no sense to do this check in clustered apic mode, so skip it + */ + if (!check_phys_apicid_present(boot_cpu_physical_apicid)) { + printk("weird, boot CPU (#%d) not listed by the BIOS.\n", + boot_cpu_physical_apicid); + physid_set(hard_smp_processor_id(), phys_cpu_present_map); + } + + /* + * Switch from PIC to APIC mode. + */ connect_bsp_APIC(); + setup_local_APIC(); - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); +#ifdef CONFIG_X86_IO_APIC + /* + * Now start the IO-APICs + */ + if (smp_found_config && !skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); +#endif + return 0; +} - setup_local_APIC(); +void __init APIC_late_time_init(void) +{ + /* Improve our loops per jiffy estimate */ + loops_per_jiffy = ((1000 + HZ - 1)/HZ)*cpu_khz; + boot_cpu_data.loops_per_jiffy = loops_per_jiffy; + cpu_data[0].loops_per_jiffy = loops_per_jiffy; + + /* setup_apic_nmi_watchdog doesn't work properly before cpu_khz is + * initialized. So redo it here to ensure the boot cpu is setup + * properly. + */ + if (nmi_watchdog == NMI_LOCAL_APIC) + setup_apic_nmi_watchdog(); #ifdef CONFIG_X86_IO_APIC - if (smp_found_config) - if (!skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); + if (smp_found_config && !skip_ioapic_setup && nr_ioapics) + IO_APIC_late_time_init(); #endif setup_boot_APIC_clock(); - - return 0; } diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -435,4 +435,8 @@ void __init init_IRQ(void) setup_irq(FPU_IRQ, &fpu_irq); irq_ctx_init(smp_processor_id()); + +#ifdef CONFIG_X86_LOCAL_APIC + APIC_init(); +#endif } diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2310,11 +2310,15 @@ void __init setup_IO_APIC(void) sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); - check_timer(); if (!acpi_ioapic) print_IO_APIC(); } +void __init IO_APIC_late_time_init(void) +{ + check_timer(); +} + /* * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1074,6 +1074,16 @@ void *xquad_portio; EXPORT_SYMBOL(xquad_portio); #endif +/* + * Fall back to non SMP mode after errors. + * + */ +static __init void disable_smp(void) +{ + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); +} + static void __init smp_boot_cpus(unsigned int max_cpus) { int apicid, cpu, bit, kicked; @@ -1086,7 +1096,6 @@ static void __init smp_boot_cpus(unsigne printk("CPU%d: ", 0); print_cpu_info(&cpu_data[0]); - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); boot_cpu_logical_apicid = logical_smp_processor_id(); x86_cpu_to_apicid[0] = boot_cpu_physical_apicid; @@ -1098,68 +1107,27 @@ static void __init smp_boot_cpus(unsigne cpus_clear(cpu_core_map[0]); cpu_set(0, cpu_core_map[0]); + map_cpu_to_logical_apicid(); + /* * If we couldn't find an SMP configuration at boot time, * get out of here now! */ if (!smp_found_config && !acpi_lapic) { printk(KERN_NOTICE "SMP motherboard not detected.\n"); - smpboot_clear_io_apic_irqs(); - phys_cpu_present_map = physid_mask_of_physid(0); - if (APIC_init_uniprocessor()) - printk(KERN_NOTICE "Local APIC not detected." - " Using dummy APIC emulation.\n"); - map_cpu_to_logical_apicid(); - cpu_set(0, cpu_sibling_map[0]); - cpu_set(0, cpu_core_map[0]); + disable_smp(); return; } /* - * Should not be necessary because the MP table should list the boot - * CPU too, but we do it for the sake of robustness anyway. - * Makes no sense to do this check in clustered apic mode, so skip it - */ - if (!check_phys_apicid_present(boot_cpu_physical_apicid)) { - printk("weird, boot CPU (#%d) not listed by the BIOS.\n", - boot_cpu_physical_apicid); - physid_set(hard_smp_processor_id(), phys_cpu_present_map); - } - - /* - * If we couldn't find a local APIC, then get out of here now! - */ - if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) { - printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", - boot_cpu_physical_apicid); - printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n"); - smpboot_clear_io_apic_irqs(); - phys_cpu_present_map = physid_mask_of_physid(0); - cpu_set(0, cpu_sibling_map[0]); - cpu_set(0, cpu_core_map[0]); - return; - } - - verify_local_APIC(); - - /* * If SMP should be disabled, then really disable it! */ - if (!max_cpus) { - smp_found_config = 0; - printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n"); - smpboot_clear_io_apic_irqs(); - phys_cpu_present_map = physid_mask_of_physid(0); - cpu_set(0, cpu_sibling_map[0]); - cpu_set(0, cpu_core_map[0]); + if (!max_cpus || (enable_local_apic < 0)) { + printk(KERN_INFO "SMP mode deactivated.\n"); + disable_smp(); return; } - connect_bsp_APIC(); - setup_local_APIC(); - map_cpu_to_logical_apicid(); - - setup_portio_remap(); /* @@ -1240,10 +1208,6 @@ static void __init smp_boot_cpus(unsigne cpu_set(0, cpu_sibling_map[0]); cpu_set(0, cpu_core_map[0]); - smpboot_setup_io_apic(); - - setup_boot_APIC_clock(); - /* * Synchronize the TSC with the AP */ diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -444,8 +444,8 @@ static int time_init_device(void) device_initcall(time_init_device); -#ifdef CONFIG_HPET_TIMER extern void (*late_time_init)(void); +#ifdef CONFIG_HPET_TIMER /* Duplicate of time_init() below, with hpet_enable part added */ static void __init hpet_time_init(void) { @@ -462,6 +462,12 @@ static void __init hpet_time_init(void) printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); time_init_hook(); + +#if CONFIG_X86_LOCAL_APIC + if (enable_local_apic >= 0) { + APIC_late_time_init(); + } +#endif } #endif @@ -486,4 +492,10 @@ void __init time_init(void) printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); time_init_hook(); + +#if CONFIG_X86_LOCAL_APIC + if (enable_local_apic >= 0) { + late_time_init = APIC_late_time_init; + } +#endif } diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h --- a/include/asm-i386/apic.h +++ b/include/asm-i386/apic.h @@ -118,7 +118,8 @@ extern void release_lapic_nmi(void); extern void disable_timer_nmi_watchdog(void); extern void enable_timer_nmi_watchdog(void); extern void nmi_watchdog_tick (struct pt_regs * regs); -extern int APIC_init_uniprocessor (void); +extern int APIC_init(void); +extern void APIC_late_time_init(void); extern void disable_APIC_timer(void); extern void enable_APIC_timer(void); diff --git a/include/asm-i386/hw_irq.h b/include/asm-i386/hw_irq.h --- a/include/asm-i386/hw_irq.h +++ b/include/asm-i386/hw_irq.h @@ -55,6 +55,7 @@ void init_8259A(int aeoi); void FASTCALL(send_IPI_self(int vector)); void init_VISWS_APIC_irqs(void); void setup_IO_APIC(void); +void IO_APIC_late_time_init(void); void disable_IO_APIC(void); void print_IO_APIC(void); int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); diff --git a/include/asm-i386/mach-default/smpboot_hooks.h b/include/asm-i386/mach-default/smpboot_hooks.h --- a/include/asm-i386/mach-default/smpboot_hooks.h +++ b/include/asm-i386/mach-default/smpboot_hooks.h @@ -1,11 +1,6 @@ /* two abstractions specific to kernel/smpboot.c, mainly to cater to visws * which needs to alter them. */ -static inline void smpboot_clear_io_apic_irqs(void) -{ - io_apic_irqs = 0; -} - static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip) { CMOS_WRITE(0xa, 0xf); @@ -32,13 +27,3 @@ static inline void smpboot_restore_warm_ *((volatile long *) phys_to_virt(0x467)) = 0; } - -static inline void smpboot_setup_io_apic(void) -{ - /* - * Here we can be sure that there is an IO-APIC in the system. Let's - * go and set it up: - */ - if (!skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); -} diff --git a/include/asm-i386/mach-visws/smpboot_hooks.h b/include/asm-i386/mach-visws/smpboot_hooks.h --- a/include/asm-i386/mach-visws/smpboot_hooks.h +++ b/include/asm-i386/mach-visws/smpboot_hooks.h @@ -11,14 +11,7 @@ static inline void smpboot_setup_warm_re /* for visws do nothing for any of these */ -static inline void smpboot_clear_io_apic_irqs(void) -{ -} - static inline void smpboot_restore_warm_reset_vector(void) { } -static inline void smpboot_setup_io_apic(void) -{ -} diff --git a/init/main.c b/init/main.c --- a/init/main.c +++ b/init/main.c @@ -64,10 +64,6 @@ #endif #endif -#ifdef CONFIG_X86_LOCAL_APIC -#include -#endif - /* * Versions of gcc older than that listed below may actually compile * and link okay, but the end product can have subtle run time bugs. @@ -314,14 +310,7 @@ extern void setup_arch(char **); #ifndef CONFIG_SMP -#ifdef CONFIG_X86_LOCAL_APIC -static void __init smp_init(void) -{ - APIC_init_uniprocessor(); -} -#else #define smp_init() do { } while (0) -#endif static inline void setup_per_cpu_areas(void) { } static inline void smp_prepare_cpus(unsigned int maxcpus) { } - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/