Date: Wed, 5 Oct 2005 13:27:11 -0600
From: "Jordan Crouse" <jordan.crouse@amd.com>
To: lsorense@csclub.uwaterloo.ca
cc: linux-kernel@vger.kernel.org, info-linux@ldcmail.amd.com
Subject: Re: AMD Geode GX/LX support V2
Message-ID: <20051005192711.GC1548@cosmic.amd.com>
References: <20051005164626.GA25189@cosmic.amd.com>
 <20051005165405.GB25189@cosmic.amd.com>
 <20051005182947.GE8011@csclub.uwaterloo.ca>
MIME-Version: 1.0
In-Reply-To: <20051005182947.GE8011@csclub.uwaterloo.ca>
User-Agent: Mutt/1.5.11
Content-Type: text/plain;
 charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 896
Lines: 30

> Which of those options apply to the SC1200 version of the geode

if anything it would be the GEODEGX1 option, but i486 would work just as 
well.

> it use the same ide controller driver as the cs55x0 you had in your
> previous patch?

No - the SC1200 and GX1 use the cs5530 companion chip which has a different
IDE engine then the CS5535.

> I currently build a 486 kernel for use on the sc1200 and it seems to run
> pretty good that way.

Yes - as far as the kernel is concerned, the sc1200 should be very close to a
486.

Jordan

-- 
Jordan Crouse
Senior Linux Engineer
AMD - Personal Connectivity Solutions Group
<www.amd.com/embeddedprocessors>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/