Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751445AbVJKTJg (ORCPT ); Tue, 11 Oct 2005 15:09:36 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751466AbVJKTJf (ORCPT ); Tue, 11 Oct 2005 15:09:35 -0400 Received: from er-systems.de ([217.172.180.163]:13587 "EHLO er-systems.de") by vger.kernel.org with ESMTP id S1751445AbVJKTJf (ORCPT ); Tue, 11 Oct 2005 15:09:35 -0400 Date: Tue, 11 Oct 2005 21:09:38 +0200 (CEST) From: Thomas Voegtle To: linux-kernel@vger.kernel.org Subject: bttv card after swsusp dead Message-ID: MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="-1395022924-720038107-1129057778=:16712" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1268 Lines: 46 This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. ---1395022924-720038107-1129057778=:16712 Content-Type: TEXT/PLAIN; charset=ISO-8859-15 Content-Transfer-Encoding: 8BIT Hi, with 2.6.13 I could after a software suspend use my bttv card. This is not possible aynmore with 2.6.14-rc3 and 2.6.14-rc4. dmesg part of 2.6.13: ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 bttv0: reset, reinitialize bttv0: PLL: 28636363 => 35468950 . ok and now with 2.6.14-rc3/4: ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt for device 0000:01:04.0 disabled bttv0: Can't enable device. ACPI: PCI Interrupt 0000:01:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Thomas -- Thomas V?gtle email: thomas@voegtle-clan.de ----- http://www.voegtle-clan.de/thomas ------ ---1395022924-720038107-1129057778=:16712-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/