Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932425AbVJLLeP (ORCPT ); Wed, 12 Oct 2005 07:34:15 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932427AbVJLLeP (ORCPT ); Wed, 12 Oct 2005 07:34:15 -0400 Received: from gprs189-60.eurotel.cz ([160.218.189.60]:34467 "EHLO amd.ucw.cz") by vger.kernel.org with ESMTP id S932425AbVJLLeP (ORCPT ); Wed, 12 Oct 2005 07:34:15 -0400 Date: Wed, 12 Oct 2005 13:32:39 +0200 From: Pavel Machek To: Thomas Voegtle Cc: linux-kernel@vger.kernel.org Subject: Re: bttv card after swsusp dead Message-ID: <20051012113239.GA31035@elf.ucw.cz> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-Warning: Reading this can be dangerous to your mental health. User-Agent: Mutt/1.5.9i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1070 Lines: 35 Hi! > with 2.6.13 I could after a software suspend use my bttv card. This is not > possible aynmore with 2.6.14-rc3 and 2.6.14-rc4. > > dmesg part of 2.6.13: > > ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) > -> IRQ 11 > bttv0: reset, reinitialize > bttv0: PLL: 28636363 => 35468950 . ok > > > > and now with 2.6.14-rc3/4: > > > ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) > -> IRQ 11 > ACPI: PCI interrupt for device 0000:01:04.0 disabled > bttv0: Can't enable device. > ACPI: PCI Interrupt 0000:01:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) > -> IRQ 11 You probably want to ask on acpi-devel. Looks like some change in interrupt routing broken your card.. Pavel -- if you have sharp zaurus hardware you don't need... you know my address - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/