DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
        s=beta; d=gmail.com;
        h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references;
        b=WnrYdTDlKCQ3gr8mFi1e+kvd8858T3D0LUDWgp3hwqvMoVYwFpUKuarf7ugVdGTVJcR2M9euyy4Z34Jq6qn86HaKRWzOJOfprMBivRBohd3YSYciUC1dmd29+ZBmiXSyxQD05ESRbUqswYzGhAw97+djTXF33a5PQYRWUZlyEmw=
Message-ID: <e8ac1af10510150601q19802772ubf78f474cdd205d1@mail.gmail.com>
Date: Sat, 15 Oct 2005 18:31:07 +0530
From: Tushar Adeshara <adesharatushar@gmail.com>
To: Gabriele Brugnoni <news@dveprojects.com>
Subject: Re: interruptible_sleep_on, interrupts and device drivers
Cc: linux-kernel@vger.kernel.org
In-Reply-To: <200510151200.32148.news@dveprojects.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7BIT
Content-Disposition: inline
References: <200510151200.32148.news@dveprojects.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 4005
Lines: 103

On 10/15/05, Gabriele Brugnoni <news@dveprojects.com> wrote:
> Hello,
>
> I'm writing a device driver for a UART to be used to drive a RS485 line.
> I would use the interruptible_sleep_on function to wait for receiver ready,
> or for the transmitter to finish.
> I've take a look at how other device driver use this function, and a big
> question is born on my mind:
>
> In several device driver I've seen that:
>
> The code check for the availability of data.
> If not available, a call the interruptible_sleep_on is made.
> In the interrupt handler, when data becomes ready, a wakeup_interruptible
> call is made.
>
> Often the variables that indicates if data is available or not are tested
> between spin_lock and unlock (or save_irq and restore_irq) so that the
> interrupt handler cannot change the status during check.
>
> But:
> If the test is made with IRQ closed, and IRQ are then enabled after the test
> but before the call to interruptible_sleep_on, what happen if the handler
> break the procedure immediately before entering the interruptible_sleep_on
> function ?
> I beleave that the interrupt handler, calling the wakeup function, will not
> wake our process, because is not in the waiting list. But at return from
> IRQ handler, the process will continue execution calling the sleep
> function, and nobody will wake it because the data is now already available.
>
> I try to explain better with an example:
>
> This may be a function that should wait that the UART send all chars.
> When the interrupt for shift empty will be serviced, the
> wakeup_interruptible function will wake all waiting processes in wait list.
>
>
> 10: void waitEndTX ( void )
> 11: {
> 12:    unsigned long flags;
> 13:
> 14:    //....
> 15:
> 16:    spin_lock_irqsave(&mylock, flags);
> 17:    if( tx_done ) {
> 18:        spin_lock_irqrestore(&mylock, flags);
> 19:        return;
> 20:    }
> 21:    spin_lock_irqrestore(&mylock, flags);
> 22:    interruptible_sleep_on ( &uartwait );
> 23:}
>
>
> This type of code is very used in a lot of device drivers, in kernel 2.6.x
> (the char/specialix, for example).
>
> OK, Now we suppose that the UART finish to send the character exactely when
> the process has closed the IRQ and is about to the the tx_done variable.
> (At line 17 for example).
> The hardware will asserts the IRQ line, but the processor has the IRQ
> closed, so the execution will continue in our process.
> Now at line 21 our process enable the IRQ.
> The CPU will immediately jumps to irq handler, breaking the execution at
> line 22. Our handler will set the variable tx_done to one.
> When the cpu control returns to our calling process, at line 21, the tx_done
> has already tested and it's value was zero. The execution continue with the
> call to interruptible_sleep_on function, that will put our process in the
> uartwait queue, but nobody will wakeup it.
>
> If this is true, a lot of device driver in linux kernel may have this
> problem. This sound me very strange, so where I'm wrong ?

That is the reason why wait_event and friends are introduced.
See LDD3 , Ch 10. Interrupt Handling.  It contains a good example
of simple char driver which also takes care of missed Interrupt.

>
>
> Thanks in advance.
> Gabriele
>
> (Note: I've tried to post this message with another program but I think
> without success. I apologize if this message will appears twice.)
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
>


--
Regards,
Tushar
--------------------
It's not a problem, it's an opportunity for improvement. Lets improve.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/