Date: Sun, 16 Oct 2005 20:07:18 +0300
From: Ville Herva <vherva@vianova.fi>
To: linux-kernel@vger.kernel.org
Subject: 2.6.14-rc4: broken DVD-R recording [Re: Upgrade 2.6.12-rc4 -> 2.6.13.1 broke DVD-R writing (fails consistently in OPC phase)]
Message-ID: <20051016170718.GK24760@vianova.fi>
Reply-To: vherva@vianova.fi
References: <20050925123049.GA24760@viasys.com> <43369C2F.3050201@telia.com> <20050925130436.GD24719@viasys.com> <20050925142825.GB24742@viasys.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20050925142825.GB24742@viasys.com>
User-Agent: Mutt/1.5.10i
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1484
Lines: 42

On Sun, Sep 25, 2005 at 05:28:25PM +0300, you [Ville Herva] wrote:
> On Sun, Sep 25, 2005 at 04:04:36PM +0300, you [Ville Herva] wrote:
> > On Sun, Sep 25, 2005 at 02:46:39PM +0200, you [Simon Strandman] wrote:
> > > Ville Herva skrev:
> > > 
> > > >The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with
> > > >2.6.13.1 I use HZ=250 (that being the default nowadays) and 
> > > >2.6.13.1 has CONFIG_PREEMPT_VOLUNTARY=y instead of 2.6.12-rc4's
> > > >CONFIG_PREEMPT=y and CONFIG_PREEMPT_BKL=y ?.
> > > >
> > > >Any ideas?
> > >
> > > Have you tried with HZ=1000?
> > 
> > No yet. 
> > 
> > I did see the HZ=250 problem wrt DVD recording thread earlier, but I got the
> > impression it had to do with not being able to supply data fast enough to
> > the drive. 
> > 
> > In my case, it fails before it even write a single byte to the disc.
> > (Fortunately it means it doesn't ruin the disc each time I try to write.)
> 
> Recompiled the same 2.6.13.1 kernel with HZ=1000. DVD-R writing still fails
> with the exact same error.

Still happens with 2.6.14-rc4.

Peter ?sterlund's suggestion to kill hald and kded in the pktcdvd thread did
not help either. This is a Fedora rawhide installation, though.


-- v -- 

v@iki.fi

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/