Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932326AbVJQVHn (ORCPT ); Mon, 17 Oct 2005 17:07:43 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932327AbVJQVHn (ORCPT ); Mon, 17 Oct 2005 17:07:43 -0400 Received: from alpha.logic.tuwien.ac.at ([128.130.175.20]:36785 "EHLO alpha.logic.tuwien.ac.at") by vger.kernel.org with ESMTP id S932326AbVJQVHm (ORCPT ); Mon, 17 Oct 2005 17:07:42 -0400 Date: Mon, 17 Oct 2005 23:07:23 +0200 To: Andrew Morton , linux-kernel@vger.kernel.org, acpi-devel@lists.sourceforge.net Subject: 2.6.14-rc4-mm1, acpi, irq problems, hdc (cdrom) dead Message-ID: <20051017210723.GA17760@gamma.logic.tuwien.ac.at> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="yrj/dFKFPuw6o+aM" Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.3.28i From: Norbert Preining Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19353 Lines: 443 --yrj/dFKFPuw6o+aM Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: inline Content-Transfer-Encoding: 8bit Hi Andrew, hi ACPI developers! Since some kernel revisions (hard to tell since when, I don't use cdrom very often), the cdrom hdc is not working any more: vmunix: hdc: lost interrupt vmunix: cdrom_pc_intr, write: dev hdc: flags = REQ_STARTED REQ_PC REQ_FAILED REQ_QUIET vmunix: sector 0, nr/cnr 0/0 vmunix: bio 00000000, biotail 00000000, buffer 00000000, data 00000000, len 0 vmunix: cdb: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 vmunix: hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x00) I confirmed that turning off acpi fixes this problem, i.e. booting with acpi=off made the cdrom/hdc working again. Attached is dmesg.acpioff.txt (acpi=off) and dmesg.withacpi.txt (normal boot). Best wishes Norbert ------------------------------------------------------------------------------- Dr. Norbert Preining Universit? di Siena gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094 ------------------------------------------------------------------------------- SMEARISARY (n.) The correct name for a junior apprentice greengrocer whose main duty is to arrange the fruit so that the bad side is underneath. From the name of a character not in Dickens. --- Douglas Adams, The Meaning of Liff --yrj/dFKFPuw6o+aM Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.acpioff.txt" Linux version 2.6.14-rc4-mm1 (root@gandalf) (gcc version 4.0.2 (Debian 4.0.2-2)) #1 PREEMPT Mon Oct 17 11:03:10 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data) BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130928 DMA zone: 4096 pages, LIFO batch:2 DMA32 zone: 0 pages, LIFO batch:2 Normal zone: 126832 pages, LIFO batch:64 HighMem zone: 0 pages, LIFO batch:2 DMI present. Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) Built 1 zonelists Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Initializing CPU#0 Kernel command line: BOOT_IMAGE=2.6.14-rc4-mm1 ro root=303 lapic acpi=off weird, boot CPU (#0) not listed by the BIOS. PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2193.334 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515024k/523712k available (2023k kernel code, 8108k reserved, 725k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4392.93 BogoMIPS (lpj=8785868) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. softlockup thread 0 started up. NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfd731, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20050916 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f5f10 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x913b, dseg 0x400 PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/248c] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 10 for device 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:02:06.0 PCI: Sharing IRQ 10 with 0000:02:06.1 PCI: Sharing IRQ 10 with 0000:02:07.0 PCI: Sharing IRQ 10 with 0000:02:09.2 pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0b: ioport range 0x1000-0x105f has been reserved pnp: 00:0b: ioport range 0x1060-0x107f has been reserved pnp: 00:0b: ioport range 0x1180-0x11bf has been reserved PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: e8100000-e81fffff PREFETCH window: f0000000-f7ffffff PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00004000-00004fff IO window: 00006000-00006fff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bus 7, cardbus bridge: 0000:02:06.1 IO window: 00007000-00007fff IO window: 00008000-00008fff PREFETCH window: 34000000-35ffffff MEM window: 36000000-37ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-5fff MEM window: e8200000-e87fffff PREFETCH window: f8000000-f80fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Found IRQ 10 for device 0000:02:06.0 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:02:06.1 PCI: Sharing IRQ 10 with 0000:02:07.0 PCI: Sharing IRQ 10 with 0000:02:09.2 PCI: Enabling device 0000:02:06.1 (0104 -> 0107) PCI: Found IRQ 10 for device 0000:02:06.1 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:02:06.0 PCI: Sharing IRQ 10 with 0000:02:07.0 PCI: Sharing IRQ 10 with 0000:02:09.2 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Real Time Clock Driver v1.12 hw_random: cannot enable RNG, aborting PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Found IRQ 10 for device 0000:00:1f.6 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: Sharing IRQ 10 with 0000:00:1f.5 PCI: Sharing IRQ 10 with 0000:02:09.0 mice: PS/2 mouse device common for all mice parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] input: AT Translated Set 2 keyboard//class/input_dev as input0 lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) PCI: Found IRQ 10 for device 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:02:06.0 PCI: Sharing IRQ 10 with 0000:02:06.1 PCI: Sharing IRQ 10 with 0000:02:07.0 PCI: Sharing IRQ 10 with 0000:02:09.2 ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: TOSHIBA MK8026GAX, ATA DISK drive Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 input: SynPS/2 Synaptics TouchPad//class/input_dev as input1 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 08:13:09 2005 UTC). ALSA device list: No soundcards found. NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 5, 131072 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode swsusp: Resume From Partition /dev/hda3 PM: Checking swsusp image. swsusp: Error -22 check for resume file PM: Resume from disk failed. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. --yrj/dFKFPuw6o+aM Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.withacpi.txt" Linux version 2.6.14-rc4-mm1 (root@gandalf) (gcc version 4.0.2 (Debian 4.0.2-2)) #1 PREEMPT Mon Oct 17 11:03:10 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data) BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130928 DMA zone: 4096 pages, LIFO batch:2 DMA32 zone: 0 pages, LIFO batch:2 Normal zone: 126832 pages, LIFO batch:64 HighMem zone: 0 pages, LIFO batch:2 DMI present. ACPI: RSDP (v000 ACER ) @ 0x000f5e80 ACPI: RSDT (v001 ACER RSDT 0x20020930 LTP 0x00000000) @ 0x1ff75a7b ACPI: FADT (v001 ACER IBIS 0x20020930 PTL 0x0000001e) @ 0x1ff7bf64 ACPI: BOOT (v001 ACER IBIS 0x20020930 LTP 0x00000001) @ 0x1ff7bfd8 ACPI: DSDT (v001 ACER IBIS 0x20020930 MSFT 0x0100000e) @ 0x00000000 Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) Built 1 zonelists Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Initializing CPU#0 Kernel command line: BOOT_IMAGE=2.6.14-rc4-mm1 ro root=303 lapic weird, boot CPU (#0) not listed by the BIOS. PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2193.260 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515024k/523712k available (2023k kernel code, 8108k reserved, 725k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4392.94 BogoMIPS (lpj=8785889) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI-0284: *** Info: Table [DSDT] replaced by host OS ACPI: setting ELCR to 0200 (from 0420) softlockup thread 0 started up. NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd731, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20050916 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs *5) ACPI: PCI Interrupt Link [LNKE] (IRQs *10) ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled. ACPI: Embedded Controller [EC0] (gpe 29) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: e8100000-e81fffff PREFETCH window: f0000000-f7ffffff PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00004000-00004fff IO window: 00006000-00006fff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bus 7, cardbus bridge: 0000:02:06.1 IO window: 00007000-00007fff IO window: 00008000-00008fff PREFETCH window: 34000000-35ffffff MEM window: 36000000-37ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-5fff MEM window: e8200000-e87fffff PREFETCH window: f8000000-f80fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Enabling device 0000:02:06.1 (0104 -> 0107) ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Simple Boot Flag at 0x36 set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 Initializing Cryptographic API ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN0] (off) ACPI: Fan [FAN1] (off) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THRM] (56 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Real Time Clock Driver v1.12 hw_random: cannot enable RNG, aborting PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:1f.6 disabled mice: PS/2 mouse device common for all mice parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] input: AT Translated Set 2 keyboard//class/input_dev as input0 lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: TOSHIBA MK8026GAX, ATA DISK drive Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 input: SynPS/2 Synaptics TouchPad//class/input_dev as input1 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 08:13:09 2005 UTC). ALSA device list: No soundcards found. NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 5, 131072 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode swsusp: Resume From Partition /dev/hda3 PM: Checking swsusp image. swsusp: Error -22 check for resume file PM: Resume from disk failed. ACPI wakeup devices: MDM0 HUB GLAN USB1 USB2 USB1 ACPI: (supports S0 S3 S4 S5) EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. --yrj/dFKFPuw6o+aM-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/