Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964788AbVJSKw5 (ORCPT ); Wed, 19 Oct 2005 06:52:57 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S964789AbVJSKw5 (ORCPT ); Wed, 19 Oct 2005 06:52:57 -0400 Received: from 204.4.76.83.cust.bluewin.ch ([83.76.4.204]:4150 "EHLO kestrel.twibright.com") by vger.kernel.org with ESMTP id S964788AbVJSKw5 (ORCPT ); Wed, 19 Oct 2005 06:52:57 -0400 Date: Wed, 19 Oct 2005 12:52:39 +0200 From: Karel Kulhavy To: linux-kernel@vger.kernel.org Subject: 3c900 boot-time kernel commandline parameters in 2.4.25 Message-ID: <20051019105239.GA9858@kestrel> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-Orientation: Gay User-Agent: Mutt/1.5.8i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1196 Lines: 31 How do I tell Linux kernel 2.4.25 on boot-time kernel commandline to switch my eth0 ----------------------------------------------------------------------- Bus 1, device 3, function 0: Ethernet controller: 3Com Corporation 3c900 Combo [Boomerang] (rev 0). IRQ 11. Master Capable. Latency=32. Min Gnt=3.Max Lat=8. I/O at 0xc000 [0xc03f]. ----------------------------------------------------------------------- to TP transceiver and 10/100 autonegotiation? I looked into Documentation/00-INDEX and into kernel-parameters.txt and found just " ether= [HW,NET] Ethernet cards parameters (irq, base_io_addr, mem_start, mem_end, name. (mem_start is often overloaded to mean something different and driver-specific). " which neither doesn't answer my question neither point to any documentation where my question could be answered. CL< - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/