Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932221AbVJVKoF (ORCPT ); Sat, 22 Oct 2005 06:44:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932216AbVJVKoF (ORCPT ); Sat, 22 Oct 2005 06:44:05 -0400 Received: from ms004msg.fastwebnet.it ([213.140.2.58]:39816 "EHLO ms004msg.fastwebnet.it") by vger.kernel.org with ESMTP id S932222AbVJVKoE (ORCPT ); Sat, 22 Oct 2005 06:44:04 -0400 Date: Sat, 22 Oct 2005 12:43:06 +0200 From: Paolo Ornati To: Linux Kernel Mailing List Subject: [2.6.14-rc? on x86-64] Total machine freeze Message-ID: <20051022124306.36d13c39@localhost> X-Mailer: Sylpheed-Claws 1.9.13 (GTK+ 2.6.8; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 22214 Lines: 622 Hello, 2.6.14-rc[45] works fine here, usually. But sometimes (~2 times in a week) I get an hard-freeze: Sys-RQ doesn't work machine doesn't reply to ping / ssh nothing in the logs Seems like it loops somewhere with interrupt disabled... but I don't know. What can I try to "debug" it? Hardware: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 12 model name : AMD Athlon(tm) 64 Processor 3200+ stepping : 0 cpu MHz : 2202.834 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow bogomips : 4413.00 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01) Config: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14-rc5 # Thu Oct 20 09:16:37 2005 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_MK8=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DUMMY_IOMMU=y CONFIG_X86_MCE=y CONFIG_PHYSICAL_START=0x100000 CONFIG_SECCOMP=y CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_PM=y CONFIG_ACPI=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_UID16=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_FIB_HASH=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_BIC=y CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_FILTER=m CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_PNP=y CONFIG_PNPACPI=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_IDE_TASK_IOCTL=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_GENERIC=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_AUTO=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SATA=y CONFIG_SCSI_SATA_VIA=y CONFIG_SCSI_QLA2XXX=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_TUN=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_NET_PCI=y CONFIG_8139TOO=y CONFIG_SK98LIN=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_HW_RANDOM=y CONFIG_RTC=y CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_DRM=y CONFIG_DRM_RADEON=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ISA=y CONFIG_I2C_VIAPRO=y CONFIG_HWMON=y CONFIG_HWMON_VID=y CONFIG_SENSORS_W83627HF=y CONFIG_VIDEO_DEV=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_RADEON=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_RAWMIDI=y CONFIG_SND_SEQUENCER=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=y CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y CONFIG_SND_MPU401_UART=y CONFIG_SND_AC97_CODEC=y CONFIG_SND_AC97_BUS=y CONFIG_SND_VIA82XX=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y CONFIG_USB_STV680=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_JBD=y CONFIG_REISERFS_FS=y CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS4_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_CRC32=y dmesg: Bootdata ok (command line is root=/dev/sda6 elevator=cfq video=radeonfb:1024x768@60) Linux version 2.6.14-rc5-g93918e9a (paolo@tux) (gcc version 3.4.4 (Gentoo 3.4.4-r1)) #23 Thu Oct 20 09:17:31 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa850 ACPI: RSDT (v001 A M I OEMRSDT 0x06000517 MSFT 0x00000097) @ 0x000000001ff30000 ACPI: FADT (v001 A M I OEMFACP 0x06000517 MSFT 0x00000097) @ 0x000000001ff30200 ACPI: MADT (v001 A M I OEMAPIC 0x06000517 MSFT 0x00000097) @ 0x000000001ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x06000517 MSFT 0x00000097) @ 0x000000001ff40040 ACPI: DSDT (v001 A0058 A0058002 0x00000002 MSFT 0x0100000d) @ 0x0000000000000000 On node 0 totalpages: 130767 DMA zone: 3999 pages, LIFO batch:1 Normal zone: 126768 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) Built 1 zonelists Kernel command line: root=/dev/sda6 elevator=cfq video=radeonfb:1024x768@60 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2202.834 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Memory: 509908k/523456k available (3035k kernel code, 12772k reserved, 1138k data, 160k init) Calibrating delay using timer specific routine.. 4413.00 BogoMIPS (lpj=2206504) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00 Using local APIC timer interrupts. Detected 12.516 MHz APIC timer. testing NMI watchdog ... OK. softlockup thread 0 started up. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: fd100000-fd6fffff PREFETCH window: d5000000-f4ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=166.00 MHz radeonfb: PLL min 20000 max 40000 radeonfb: Monitor 1 type CRT found radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 128x48 radeonfb (0000:01:00.0): ATI Radeon Yd ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1]) Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.17.0 20050311 on minor 0: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 sk98lin: Asus mainboard with buggy VPD? Correcting data. eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 18 eth1: RealTek RTL8139 at 0xffffc20000004000, 00:e0:4c:f0:ab:b8, IRQ 18 eth1: Identified 8139 chip type 'RTL-8139C' tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 3 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA libata version 1.12 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 3 sata_via(0000:00:0f.0): routed to hard irq line 3 ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 19 ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 19 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via Vendor: ATA Model: ST380817AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.4, from 7 to 4 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 20, io mem 0xfd900000 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 4 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 4 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 20, io base 0x0000b400 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 4 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 20, io base 0x0000b800 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 4 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 20, io base 0x0000c000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 08:13:09 2005 UTC). ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:11.5, from 7 to 5 PCI: Setting latency timer of device 0000:00:11.5 to 64 input: AT Translated Set 2 keyboard on isa0060/serio0 logips2pp: Detected unknown logitech mouse model 85 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] ALSA device list: #0: VIA 8237 with AD1980 at 0xec00, irq 21 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda6: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 50839 ext3_orphan_cleanup: deleting unreferenced inode 50490 ext3_orphan_cleanup: deleting unreferenced inode 21531 ext3_orphan_cleanup: deleting unreferenced inode 21527 ext3_orphan_cleanup: deleting unreferenced inode 16398 ext3_orphan_cleanup: deleting unreferenced inode 16389 ext3_orphan_cleanup: deleting unreferenced inode 770049 EXT3-fs: sda6: 7 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 160k freed Adding 1004020k swap on /dev/sda7. Priority:-1 extents:1 across:1004020k EXT3 FS on sda6, internal journal ReiserFS: sda8: found reiserfs format "3.6" with standard journal ReiserFS: sda8: using ordered data mode ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda8: checking transaction log (sda8) ReiserFS: sda8: replayed 6 transactions in 0 seconds ReiserFS: sda8: Using r5 hash to sort names ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.3 (2044 buckets, 16352 max) - 248 bytes per conntrack eth1: link up, 10Mbps, half-duplex, lpa 0x0000 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: reserved bits set in mode 0x1f000a0f. Fixed. agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode. agpgart: X requested AGPx8 but bridge not capable. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode -- Paolo Ornati Linux 2.6.14-rc5-g93918e9a on x86_64 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/