Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751575AbVKBLBE (ORCPT ); Wed, 2 Nov 2005 06:01:04 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751577AbVKBLBE (ORCPT ); Wed, 2 Nov 2005 06:01:04 -0500 Received: from ns.dynamicweb.hu ([195.228.155.139]:25238 "EHLO dynamicweb.hu") by vger.kernel.org with ESMTP id S1751575AbVKBLBB (ORCPT ); Wed, 2 Nov 2005 06:01:01 -0500 Message-ID: <027b01c5df9d$81f53f00$0400a8c0@dcccs> From: "JaniD++" To: Subject: IDE HDD fail? Date: Wed, 2 Nov 2005 12:06:39 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1437 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10524 Lines: 277 Hello list, This happened 2nd times. At this point, the problem is reproducable. (until i power down the server) I have one IDE-HDD, that looks like everything is normal (no error message at all), but when i write to the disk (eg fdisk), ALL DATA IS LOST! This problem is generated to me about 1-1.5TB data loss on my 8TB system (4x2TB disk nodes), 2 times! This time i didnt shutdown the server, because the problem is visible now. I dont know, what is wrong exactly, but i have few tips: - the HDD itself (the first time i have replaced the disk, but the original is working fine too, i don't think) - the ide adapter (SiI680: chipset revision 2) - the ide cable (the first time replaced too, i don't think) - the mainboard (abit IS7-E) - software i mean one driver The smartctl is reports no error at all including the drive offline long self test! kernel: 2.6.12-rc1 This caused after this command: hdparm -c 1 -a 0 -M 254 -W 1 -m 16 -u 0 /dev/hdh Can somebody help me to find the problem source? Thanks Janos only one error message what i can find after hdparm command: Oct 30 22:31:48 st-0001 sshd(pam_unix)[10610]: session opened for user root by (uid=0) Oct 30 22:32:44 st-0001 kernel: hdh: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } Oct 30 22:32:44 st-0001 kernel: hdh: task_no_data_intr: error=0x04 { DriveStatusError } Oct 30 22:32:44 st-0001 kernel: ide: failed opcode was: 0xef Oct 30 22:32:44 st-0001 kernel: hdh: status error: status=0x58 { DriveReady SeekComplete DataRequest } Oct 30 22:32:44 st-0001 kernel: Oct 30 22:32:44 st-0001 kernel: ide: failed opcode was: unknown Oct 30 22:32:44 st-0001 kernel: hdh: drive not ready for command Oct 30 22:32:44 st-0001 kernel: hdj: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } Oct 30 22:32:44 st-0001 kernel: hdj: task_no_data_intr: error=0x04 { DriveStatusError } Oct 30 22:32:44 st-0001 kernel: ide: failed opcode was: 0xef Oct 30 22:32:49 st-0001 sshd(pam_unix)[10610]: session closed for user root About 1 hour after, the concentrator crashed with XFS corruption. I have reboot the st-0001 (and the concentrator), and tried these commands: [root@st-0001 root]# fdisk /dev/hdh Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklab el Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. The number of cylinders for this disk is set to 24792. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-24792, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-24792, default 24792): Using default value 24792 Command (m for help): p Disk /dev/hdh: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdh1 1 24792 199141708+ 83 Linux Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. [root@st-0001 root]# fdisk /dev/hdh Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklab el Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. The number of cylinders for this disk is set to 24792. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): p Disk /dev/hdh: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System Command (m for help): q [root@st-0001 root]# smartctl -t long /dev/hdh ... ~1 hour test..... [root@st-0001 root]# smartctl -a /dev/hdh smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: Maxtor 6B200P0 Serial Number: B418P48H Firmware Version: BAH41B70 User Capacity: 203,928,109,056 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Wed Nov 2 11:52:27 2005 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1622) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 82) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 206 206 063 Pre-fail s - 7270 4 Start_Stop_Count 0x0032 253 253 000 Old_age ys - 37 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail s - 0 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail ine - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age ys - 0 8 Seek_Time_Performance 0x0027 252 232 187 Pre-fail s - 51510 9 Power_On_Hours 0x0032 237 237 000 Old_age ys - 12521 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail s - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail s - 0 12 Power_Cycle_Count 0x0032 253 253 000 Old_age ys - 85 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age ys - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age ys - 0 194 Temperature_Celsius 0x0032 032 253 000 Old_age ys - 29 195 Hardware_ECC_Recovered 0x000a 253 241 000 Old_age ys - 33773 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age line - 0 197 Current_Pending_Sector 0x0008 253 253 000 Old_age line - 0 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age line - 0 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age line - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age ys - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age ys - 0 202 TA_Increase_Count 0x000a 253 251 000 Old_age ys - 0 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail s - 8 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age ys - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age ys - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age ys - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age ys - 0 209 Offline_Seek_Performnce 0x0024 234 234 000 Old_age line - 237 210 Unknown_Attribute 0x0032 253 252 000 Old_age ys - 0 211 Unknown_Attribute 0x0032 253 252 000 Old_age ys - 0 212 Unknown_Attribute 0x0032 253 253 000 Old_age ys - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 9 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/